mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Caesar Wang <wxt@rock-chips.com>
To: "Stéphane Marchesin" <stephane.marchesin@gmail.com>
Cc: Caesar Wang <wxt@rock-chips.com>,
	linux-rockchip@lists.infradead.org,
	Thierry Reding <thierry.reding@gmail.com>,
	Linux Kernel list <linux-kernel@vger.kernel.org>,
	"dri-devel@lists.freedesktop.org"
	<dri-devel@lists.freedesktop.org>
Subject: Re: [PATCH v2 2/2] drm/panel: simple: Add support BOE nv101wxmn51
Date: Wed, 14 Dec 2016 11:01:43 +0800	[thread overview]
Message-ID: <2985f6b8-04a5-efb3-6926-1645495efed6@rock-chips.com> (raw)
In-Reply-To: <CACP_E+K1_c2ryUOKgqOvj9oJp6EKUc+44J0AiFNAU_C=7WJFSw@mail.gmail.com>

在 2016年12月13日 04:22, Stéphane Marchesin 写道:
> On Wed, Dec 7, 2016 at 11:26 PM, Caesar Wang <wxt@rock-chips.com> wrote:
>> 10.1WXGA is a color active matrix TFT LCD module using amorphous silicon
>> TFT's as an active switching devices. It can be supported by the
>> simple-panel driver.
>>
>> Read the panel edid information;
>>
>> EDID MODE DETAILS
>>                  name = <NULL>
>>                  pixel_clock = 71900
>>                  lvds_dual_channel = 0
>>                  refresh = 0
>>                  ha = 1280
>>                  hbl = 160
>>                  hso = 48
>>                  hspw = 32
>>                  hborder = 0
>>                  va = 800
>>                  vbl = 32
>>                  vso = 3
>>                  vspw = 5
>>                  vborder = 0
>>                  phsync = +
>>                  pvsync = -
>>                  x_mm = 0
>>                  y_mm = 0
>> drm_display_mode
>>                  .hdisplay = 1280
>>                  .hsync_start = 1328
>>                  .hsync_end = 1360
>>                  .htotal = 1440
>>                  .vdisplay = 800
>>                  .vsync_start = 803
>>                  .vsync_end = 808
>>                  .vtotal = 832
>>
>> Signed-off-by: Caesar Wang <wxt@rock-chips.com>
>> ---
>>
>> Changes in v2:
>> - fix the vsync_start and vsync_end from the edid.
>> - change the commit.
>>
>>   drivers/gpu/drm/panel/panel-simple.c | 31 +++++++++++++++++++++++++++++++
>>   1 file changed, 31 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
>> index 06aaf79..7c90f16 100644
>> --- a/drivers/gpu/drm/panel/panel-simple.c
>> +++ b/drivers/gpu/drm/panel/panel-simple.c
>> @@ -668,6 +668,34 @@ static const struct panel_desc avic_tm070ddh03 = {
>>          },
>>   };
>>
>> +static const struct drm_display_mode boe_nv101wxmn51_mode = {
>> +       .clock = 71900,
>> +       .hdisplay = 1280,
>> +       .hsync_start = 1280 + 48,
>> +       .hsync_end = 1280 + 48 + 32,
>> +       .htotal = 1280 + 48 + 32 + 80,
>> +       .vdisplay = 800,
>> +       .vsync_start = 800 + 3,
>> +       .vsync_end = 800 + 3 + 5,
>> +       .vtotal = 800 + 3 + 5 + 24,
>> +       .vrefresh = 60,
>> +};
>> +
>> +static const struct panel_desc boe_nv101wxmn51 = {
>> +       .modes = &boe_nv101wxmn51_mode,
>> +       .num_modes = 1,
> There are two modes in the EDID (there is a downclock one). Can you
> add both modes?

Yup, I will add them for next version.
Thanks.

-Caesar
>
> Stéphane
>
>> +       .bpc = 8,
>> +       .size = {
>> +               .width = 217,
>> +               .height = 136,
>> +       },
>> +       .delay = {
>> +               .prepare = 210,
>> +               .enable = 50,
>> +               .unprepare = 160,
>> +       },
>> +};
>> +
>>   static const struct drm_display_mode chunghwa_claa070wp03xg_mode = {
>>          .clock = 66770,
>>          .hdisplay = 800,
>> @@ -1748,6 +1776,9 @@ static const struct of_device_id platform_of_match[] = {
>>                  .compatible = "avic,tm070ddh03",
>>                  .data = &avic_tm070ddh03,
>>          }, {
>> +               .compatible = "boe,nv101wxmn51",
>> +               .data = &boe_nv101wxmn51,
>> +       }, {
>>                  .compatible = "chunghwa,claa070wp03xg",
>>                  .data = &chunghwa_claa070wp03xg,
>>          }, {
>> --
>> 2.7.4
>>
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel@lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/dri-devel
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip

      reply	other threads:[~2016-12-14  3:02 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-08  7:26 [PATCH v2 1/2] dt-bindings: display: Add BOE nv101wxmn51 panel binding Caesar Wang
2016-12-08  7:26 ` [PATCH v2 2/2] drm/panel: simple: Add support BOE nv101wxmn51 Caesar Wang
2016-12-12 20:22   ` Stéphane Marchesin
2016-12-14  3:01     ` Caesar Wang [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2985f6b8-04a5-efb3-6926-1645495efed6@rock-chips.com \
    --to=wxt@rock-chips.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=stephane.marchesin@gmail.com \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®