Re:Re: [PATCH v3 2/3] bus: mhi: host: Add name for mhi_controller

["Slark Xiao" <slark_xiao@163.com>]

At 2024-06-28 22:38:57, "Jeffrey Hugo" <quic_jhugo@quicinc.com> wrote:
>On 6/28/2024 1:36 AM, Slark Xiao wrote:
>>   For SDX72 MBIM mode, it starts data mux id from 112 instead of 0.
>>   This would lead to device can't ping outside successfully.
>>   Also MBIM side would report "bad packet session (112)".
>

>Weird indentation

My mistake. Will be corrected in next.

>
>>   In oder to fix this issue, we decide to use the modem name
>
>"order"
>
>> to do a match in client driver side. Then client driver could
>> set a corresponding mux_id value for this modem product.
>> 
>> Signed-off-by: Slark Xiao <slark_xiao@163.com>
>> ---
>>   drivers/bus/mhi/host/pci_generic.c | 1 +
>>   include/linux/mhi.h                | 2 ++
>>   2 files changed, 3 insertions(+)
>> 
>> diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c
>> index 1fb1c2f2fe12..14a11880bcea 100644
>> --- a/drivers/bus/mhi/host/pci_generic.c
>> +++ b/drivers/bus/mhi/host/pci_generic.c
>> @@ -1086,6 +1086,7 @@ static int mhi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
>>   	mhi_cntrl->runtime_get = mhi_pci_runtime_get;
>>   	mhi_cntrl->runtime_put = mhi_pci_runtime_put;
>>   	mhi_cntrl->mru = info->mru_default;
>> +	mhi_cntrl->name = info->name;
>>   
>>   	if (info->edl_trigger)
>>   		mhi_cntrl->edl_trigger = mhi_pci_generic_edl_trigger;
>> diff --git a/include/linux/mhi.h b/include/linux/mhi.h
>> index b573f15762f8..86aa4f52842c 100644
>> --- a/include/linux/mhi.h
>> +++ b/include/linux/mhi.h
>> @@ -361,6 +361,7 @@ struct mhi_controller_config {
>>    * @wake_set: Device wakeup set flag
>>    * @irq_flags: irq flags passed to request_irq (optional)
>>    * @mru: the default MRU for the MHI device
>> + * @name: name of the modem
>

>Why restrict this to modems?  There are plenty of other MHI devices

Actually all MHI devices could be called modems. I don't think this is
a wrong name.

>
>>    *
>>    * Fields marked as (required) need to be populated by the controller driver
>>    * before calling mhi_register_controller(). For the fields marked as (optional)
>> @@ -445,6 +446,7 @@ struct mhi_controller {
>>   	bool wake_set;
>>   	unsigned long irq_flags;
>>   	u32 mru;
>> +	const char *name;
>

>Please run pahole

Emm, just checked,  there are 3 holes:
    u32                        M3;                   /*   312     4 */
    /* XXX 4 bytes hole, try to pack */
...
    bool                       wake_set;             /*   526     1 */
    /* XXX 1 byte hole, try to pack */
...
    u32                        mru;                  /*   536     4 */
    /* XXX 4 bytes hole, try to pack */

I will put 'const char *name' above 'u32 mru' to avoid the last hole.
Is this okay?

>
>>   };
>>   
>>   /**