From: James Bottomley <James.Bottomley@HansenPartnership.com>
To: Andrew Morton <akpm@linux-foundation.org>,
Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-scsi <linux-scsi@vger.kernel.org>,
linux-kernel <linux-kernel@vger.kernel.org>
Subject: [GIT PULL] final round of SCSI updates for the 5.18+ merge window
Date: Sat, 04 Jun 2022 13:13:13 -0400 [thread overview]
Message-ID: <29ba89f60e3b9ff457056b79f3b9d86c8a4b1c48.camel@HansenPartnership.com> (raw)
Mostly small bug fixes plus other trivial updates. The major change of
note is moving ufs out of scsi and a minor update to lpfc vmid
handling.
The patch is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-misc
The short changelog is:
Bart Van Assche (1):
scsi: ufs: Split the drivers/scsi/ufs directory
Bradley Grove (1):
scsi: lpfc: Add support for ATTO Fibre Channel devices
Christoph Hellwig (2):
scsi: core: Unexport scsi_bus_type
scsi: sd: Don't call blk_cleanup_disk() in sd_probe()
Colin Ian King (1):
scsi: qla1280: Remove redundant variable
Damien Le Moal (2):
scsi: sd_zbc: Prevent zone information memory leak
scsi: sd: Fix potential NULL pointer dereference
Dan Carpenter (1):
scsi: ufs: ufshcd: Delete unnecessary NULL check
Gleb Chesnokov (1):
scsi: qla2xxx: Remove unused 'ql_dm_tgt_ex_pct' parameter
Hannes Reinecke (2):
scsi: core: Return BLK_STS_TRANSPORT for ALUA transitioning
scsi: myrb: Fix up null pointer access on myrb_cleanup()
James Smart (3):
scsi: lpfc: Add support for VMID tagging of NVMe I/Os
scsi: lpfc: Rework lpfc_vmid_get_appid() to be protocol independent
scsi: lpfc: Commonize VMID code location
Jiapeng Chong (1):
scsi: mpi3mr: Fix kernel-doc
Julia Lawall (6):
scsi: isci: Fix typo in comment
scsi: pmcraid: Fix typo in comment
scsi: smartpqi: Fix typo in comment
scsi: qedf: Fix typo in comment
scsi: esas2r: Fix typo in comment
scsi: storvsc: Fix typo in comment
Muneendra Kumar (1):
scsi: nvme-fc: Add new routine nvme_fc_io_getuuid()
Sumit Saxena (1):
scsi: mpi3mr: Rework mrioc->bsg_device model to fix warnings
Tom Rix (1):
scsi: qla2xxx: Remove setting of 'req' and 'rsp' parameters
And the diffstat:
MAINTAINERS | 10 +-
drivers/Kconfig | 2 +
drivers/Makefile | 1 +
drivers/nvme/host/fc.c | 18 ++
drivers/scsi/Kconfig | 1 -
drivers/scsi/Makefile | 1 -
drivers/scsi/esas2r/esas2r_flash.c | 2 +-
drivers/scsi/isci/request.c | 2 +-
drivers/scsi/lpfc/Makefile | 2 +-
drivers/scsi/lpfc/lpfc_crtn.h | 3 +
drivers/scsi/lpfc/lpfc_hw.h | 22 ++
drivers/scsi/lpfc/lpfc_ids.h | 30 +++
drivers/scsi/lpfc/lpfc_init.c | 89 +++++++
drivers/scsi/lpfc/lpfc_nvme.c | 45 ++++
drivers/scsi/lpfc/lpfc_scsi.c | 263 +------------------
drivers/scsi/lpfc/lpfc_vmid.c | 288 +++++++++++++++++++++
drivers/scsi/mpi3mr/mpi3mr.h | 2 +-
drivers/scsi/mpi3mr/mpi3mr_app.c | 50 ++--
drivers/scsi/myrb.c | 11 +-
drivers/scsi/pmcraid.c | 2 +-
drivers/scsi/qedf/qedf_io.c | 2 +-
drivers/scsi/qla1280.c | 3 +-
drivers/scsi/qla2xxx/qla_mid.c | 2 -
drivers/scsi/qla2xxx/qla_target.c | 7 -
drivers/scsi/scsi_lib.c | 2 +-
drivers/scsi/scsi_sysfs.c | 1 -
drivers/scsi/sd.c | 5 +-
drivers/scsi/sd.h | 4 +-
drivers/scsi/sd_zbc.c | 26 +-
drivers/scsi/smartpqi/smartpqi.h | 2 +-
drivers/scsi/storvsc_drv.c | 2 +-
drivers/ufs/Kconfig | 30 +++
drivers/ufs/Makefile | 5 +
drivers/ufs/core/Kconfig | 60 +++++
drivers/ufs/core/Makefile | 10 +
drivers/{scsi/ufs => ufs/core}/ufs-debugfs.c | 2 +-
drivers/{scsi/ufs => ufs/core}/ufs-debugfs.h | 0
.../{scsi/ufs => ufs/core}/ufs-fault-injection.c | 0
.../{scsi/ufs => ufs/core}/ufs-fault-injection.h | 0
drivers/{scsi/ufs => ufs/core}/ufs-hwmon.c | 2 +-
drivers/{scsi/ufs => ufs/core}/ufs-sysfs.c | 2 +-
drivers/{scsi/ufs => ufs/core}/ufs-sysfs.h | 0
drivers/{scsi/ufs => ufs/core}/ufs_bsg.c | 2 +-
drivers/{scsi/ufs => ufs/core}/ufs_bsg.h | 0
drivers/{scsi/ufs => ufs/core}/ufshcd-crypto.c | 2 +-
drivers/{scsi/ufs => ufs/core}/ufshcd-crypto.h | 4 +-
drivers/{scsi/ufs => ufs/core}/ufshcd-priv.h | 2 +-
drivers/{scsi/ufs => ufs/core}/ufshcd.c | 9 +-
drivers/{scsi/ufs => ufs/core}/ufshpb.c | 2 +-
drivers/{scsi/ufs => ufs/core}/ufshpb.h | 0
drivers/{scsi/ufs => ufs/host}/Kconfig | 75 +-----
drivers/{scsi/ufs => ufs/host}/Makefile | 12 -
drivers/{scsi/ufs => ufs/host}/cdns-pltfrm.c | 0
drivers/{scsi/ufs => ufs/host}/tc-dwc-g210-pci.c | 2 +-
.../{scsi/ufs => ufs/host}/tc-dwc-g210-pltfrm.c | 0
drivers/{scsi/ufs => ufs/host}/tc-dwc-g210.c | 4 +-
drivers/{scsi/ufs => ufs/host}/tc-dwc-g210.h | 0
drivers/{scsi/ufs => ufs/host}/ti-j721e-ufs.c | 0
drivers/{scsi/ufs => ufs/host}/ufs-exynos.c | 6 +-
drivers/{scsi/ufs => ufs/host}/ufs-exynos.h | 0
drivers/{scsi/ufs => ufs/host}/ufs-hisi.c | 8 +-
drivers/{scsi/ufs => ufs/host}/ufs-hisi.h | 0
.../{scsi/ufs => ufs/host}/ufs-mediatek-trace.h | 2 +-
drivers/{scsi/ufs => ufs/host}/ufs-mediatek.c | 6 +-
drivers/{scsi/ufs => ufs/host}/ufs-mediatek.h | 0
drivers/{scsi/ufs => ufs/host}/ufs-qcom-ice.c | 0
drivers/{scsi/ufs => ufs/host}/ufs-qcom.c | 8 +-
drivers/{scsi/ufs => ufs/host}/ufs-qcom.h | 2 +-
drivers/{scsi/ufs => ufs/host}/ufshcd-dwc.c | 4 +-
drivers/{scsi/ufs => ufs/host}/ufshcd-dwc.h | 2 +-
drivers/{scsi/ufs => ufs/host}/ufshcd-pci.c | 2 +-
drivers/{scsi/ufs => ufs/host}/ufshcd-pltfrm.c | 4 +-
drivers/{scsi/ufs => ufs/host}/ufshcd-pltfrm.h | 2 +-
drivers/{scsi/ufs => ufs/host}/ufshci-dwc.h | 0
include/linux/nvme-fc-driver.h | 14 +
{drivers/scsi => include}/ufs/ufs.h | 0
{drivers/scsi => include}/ufs/ufs_quirks.h | 0
{drivers/scsi => include}/ufs/ufshcd.h | 8 +-
{drivers/scsi => include}/ufs/ufshci.h | 0
{drivers/scsi => include}/ufs/unipro.h | 0
80 files changed, 728 insertions(+), 465 deletions(-)
create mode 100644 drivers/scsi/lpfc/lpfc_vmid.c
create mode 100644 drivers/ufs/Kconfig
create mode 100644 drivers/ufs/Makefile
create mode 100644 drivers/ufs/core/Kconfig
create mode 100644 drivers/ufs/core/Makefile
rename drivers/{scsi/ufs => ufs/core}/ufs-debugfs.c (99%)
rename drivers/{scsi/ufs => ufs/core}/ufs-debugfs.h (100%)
rename drivers/{scsi/ufs => ufs/core}/ufs-fault-injection.c (100%)
rename drivers/{scsi/ufs => ufs/core}/ufs-fault-injection.h (100%)
rename drivers/{scsi/ufs => ufs/core}/ufs-hwmon.c (99%)
rename drivers/{scsi/ufs => ufs/core}/ufs-sysfs.c (99%)
rename drivers/{scsi/ufs => ufs/core}/ufs-sysfs.h (100%)
rename drivers/{scsi/ufs => ufs/core}/ufs_bsg.c (99%)
rename drivers/{scsi/ufs => ufs/core}/ufs_bsg.h (100%)
rename drivers/{scsi/ufs => ufs/core}/ufshcd-crypto.c (99%)
rename drivers/{scsi/ufs => ufs/core}/ufshcd-crypto.h (97%)
rename drivers/{scsi/ufs => ufs/core}/ufshcd-priv.h (99%)
rename drivers/{scsi/ufs => ufs/core}/ufshcd.c (99%)
rename drivers/{scsi/ufs => ufs/core}/ufshpb.c (99%)
rename drivers/{scsi/ufs => ufs/core}/ufshpb.h (100%)
rename drivers/{scsi/ufs => ufs/host}/Kconfig (56%)
rename drivers/{scsi/ufs => ufs/host}/Makefile (56%)
rename drivers/{scsi/ufs => ufs/host}/cdns-pltfrm.c (100%)
rename drivers/{scsi/ufs => ufs/host}/tc-dwc-g210-pci.c (99%)
rename drivers/{scsi/ufs => ufs/host}/tc-dwc-g210-pltfrm.c (100%)
rename drivers/{scsi/ufs => ufs/host}/tc-dwc-g210.c (99%)
rename drivers/{scsi/ufs => ufs/host}/tc-dwc-g210.h (100%)
rename drivers/{scsi/ufs => ufs/host}/ti-j721e-ufs.c (100%)
rename drivers/{scsi/ufs => ufs/host}/ufs-exynos.c (99%)
rename drivers/{scsi/ufs => ufs/host}/ufs-exynos.h (100%)
rename drivers/{scsi/ufs => ufs/host}/ufs-hisi.c (99%)
rename drivers/{scsi/ufs => ufs/host}/ufs-hisi.h (100%)
rename drivers/{scsi/ufs => ufs/host}/ufs-mediatek-trace.h (93%)
rename drivers/{scsi/ufs => ufs/host}/ufs-mediatek.c (99%)
rename drivers/{scsi/ufs => ufs/host}/ufs-mediatek.h (100%)
rename drivers/{scsi/ufs => ufs/host}/ufs-qcom-ice.c (100%)
rename drivers/{scsi/ufs => ufs/host}/ufs-qcom.c (99%)
rename drivers/{scsi/ufs => ufs/host}/ufs-qcom.h (99%)
rename drivers/{scsi/ufs => ufs/host}/ufshcd-dwc.c (98%)
rename drivers/{scsi/ufs => ufs/host}/ufshcd-dwc.h (95%)
rename drivers/{scsi/ufs => ufs/host}/ufshcd-pci.c (99%)
rename drivers/{scsi/ufs => ufs/host}/ufshcd-pltfrm.c (99%)
rename drivers/{scsi/ufs => ufs/host}/ufshcd-pltfrm.h (98%)
rename drivers/{scsi/ufs => ufs/host}/ufshci-dwc.h (100%)
rename {drivers/scsi => include}/ufs/ufs.h (100%)
rename {drivers/scsi => include}/ufs/ufs_quirks.h (100%)
rename {drivers/scsi => include}/ufs/ufshcd.h (99%)
rename {drivers/scsi => include}/ufs/ufshci.h (100%)
rename {drivers/scsi => include}/ufs/unipro.h (100%)
James
next reply other threads:[~2022-06-04 17:14 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-04 17:13 James Bottomley [this message]
2022-06-05 17:16 ` pr-tracker-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=29ba89f60e3b9ff457056b79f3b9d86c8a4b1c48.camel@HansenPartnership.com \
--to=james.bottomley@hansenpartnership.com \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®