From: Giulio Benetti <giulio.benetti@micronovasrl.com>
To: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: David Airlie <airlied@linux.ie>, Chen-Yu Tsai <wens@csie.org>,
dri-devel@lists.freedesktop.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] drm/sun4i: move rgb mode_valid from connector to encoder
Date: Sun, 4 Mar 2018 11:44:54 +0100 [thread overview]
Message-ID: <29f8b108-4087-9908-9e47-255100a32149@micronovasrl.com> (raw)
In-Reply-To: <1520159870-41286-1-git-send-email-giulio.benetti@micronovasrl.com>
Hello everybody,
I wanted to move function sun4i_rgb_encoder_mode_valid from connector
section to encoder section.
This is why it changes so many things, I don't know if it is the right
way to do this.
Let me know.
Thanks
--
Giulio Benetti
CTO
MICRONOVA SRL
Sede: Via A. Niedda 3 - 35010 Vigonza (PD)
Tel. 049/8931563 - Fax 049/8931346
Cod.Fiscale - P.IVA 02663420285
Capitale Sociale € 26.000 i.v.
Iscritta al Reg. Imprese di Padova N. 02663420285
Numero R.E.A. 258642
Il 04/03/2018 11:37, Giulio Benetti ha scritto:
> mode_valid function must be connected to encoder, not connector.
> Otherwise it doesn't get called by drm.
>
> Move mode_valid function pointer to encoder helper functions,
> changing its prototype according to encoder helper function pointer.
>
> Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
> ---
> drivers/gpu/drm/sun4i/sun4i_rgb.c | 102 +++++++++++++++++++-------------------
> 1 file changed, 51 insertions(+), 51 deletions(-)
>
> diff --git a/drivers/gpu/drm/sun4i/sun4i_rgb.c b/drivers/gpu/drm/sun4i/sun4i_rgb.c
> index b8da5a5..6539dcc 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_rgb.c
> +++ b/drivers/gpu/drm/sun4i/sun4i_rgb.c
> @@ -52,11 +52,59 @@ static int sun4i_rgb_get_modes(struct drm_connector *connector)
> return drm_panel_get_modes(tcon->panel);
> }
>
> -static int sun4i_rgb_mode_valid(struct drm_connector *connector,
> - struct drm_display_mode *mode)
> +static struct drm_connector_helper_funcs sun4i_rgb_con_helper_funcs = {
> + .get_modes = sun4i_rgb_get_modes,
> +};
> +
> +static void
> +sun4i_rgb_connector_destroy(struct drm_connector *connector)
> {
> struct sun4i_rgb *rgb = drm_connector_to_sun4i_rgb(connector);
> struct sun4i_tcon *tcon = rgb->tcon;
> +
> + drm_panel_detach(tcon->panel);
> + drm_connector_cleanup(connector);
> +}
> +
> +static const struct drm_connector_funcs sun4i_rgb_con_funcs = {
> + .fill_modes = drm_helper_probe_single_connector_modes,
> + .destroy = sun4i_rgb_connector_destroy,
> + .reset = drm_atomic_helper_connector_reset,
> + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
> + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> +};
> +
> +static void sun4i_rgb_encoder_enable(struct drm_encoder *encoder)
> +{
> + struct sun4i_rgb *rgb = drm_encoder_to_sun4i_rgb(encoder);
> + struct sun4i_tcon *tcon = rgb->tcon;
> +
> + DRM_DEBUG_DRIVER("Enabling RGB output\n");
> +
> + if (!IS_ERR(tcon->panel)) {
> + drm_panel_prepare(tcon->panel);
> + drm_panel_enable(tcon->panel);
> + }
> +}
> +
> +static void sun4i_rgb_encoder_disable(struct drm_encoder *encoder)
> +{
> + struct sun4i_rgb *rgb = drm_encoder_to_sun4i_rgb(encoder);
> + struct sun4i_tcon *tcon = rgb->tcon;
> +
> + DRM_DEBUG_DRIVER("Disabling RGB output\n");
> +
> + if (!IS_ERR(tcon->panel)) {
> + drm_panel_disable(tcon->panel);
> + drm_panel_unprepare(tcon->panel);
> + }
> +}
> +
> +static enum drm_mode_status sun4i_rgb_encoder_mode_valid(struct drm_encoder *crtc,
> + const struct drm_display_mode *mode)
> +{
> + struct sun4i_rgb *rgb = drm_encoder_to_sun4i_rgb(crtc);
> + struct sun4i_tcon *tcon = rgb->tcon;
> u32 hsync = mode->hsync_end - mode->hsync_start;
> u32 vsync = mode->vsync_end - mode->vsync_start;
> unsigned long rate = mode->clock * 1000;
> @@ -106,58 +154,10 @@ static int sun4i_rgb_mode_valid(struct drm_connector *connector,
> return MODE_OK;
> }
>
> -static struct drm_connector_helper_funcs sun4i_rgb_con_helper_funcs = {
> - .get_modes = sun4i_rgb_get_modes,
> - .mode_valid = sun4i_rgb_mode_valid,
> -};
> -
> -static void
> -sun4i_rgb_connector_destroy(struct drm_connector *connector)
> -{
> - struct sun4i_rgb *rgb = drm_connector_to_sun4i_rgb(connector);
> - struct sun4i_tcon *tcon = rgb->tcon;
> -
> - drm_panel_detach(tcon->panel);
> - drm_connector_cleanup(connector);
> -}
> -
> -static const struct drm_connector_funcs sun4i_rgb_con_funcs = {
> - .fill_modes = drm_helper_probe_single_connector_modes,
> - .destroy = sun4i_rgb_connector_destroy,
> - .reset = drm_atomic_helper_connector_reset,
> - .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
> - .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> -};
> -
> -static void sun4i_rgb_encoder_enable(struct drm_encoder *encoder)
> -{
> - struct sun4i_rgb *rgb = drm_encoder_to_sun4i_rgb(encoder);
> - struct sun4i_tcon *tcon = rgb->tcon;
> -
> - DRM_DEBUG_DRIVER("Enabling RGB output\n");
> -
> - if (!IS_ERR(tcon->panel)) {
> - drm_panel_prepare(tcon->panel);
> - drm_panel_enable(tcon->panel);
> - }
> -}
> -
> -static void sun4i_rgb_encoder_disable(struct drm_encoder *encoder)
> -{
> - struct sun4i_rgb *rgb = drm_encoder_to_sun4i_rgb(encoder);
> - struct sun4i_tcon *tcon = rgb->tcon;
> -
> - DRM_DEBUG_DRIVER("Disabling RGB output\n");
> -
> - if (!IS_ERR(tcon->panel)) {
> - drm_panel_disable(tcon->panel);
> - drm_panel_unprepare(tcon->panel);
> - }
> -}
> -
> static struct drm_encoder_helper_funcs sun4i_rgb_enc_helper_funcs = {
> .disable = sun4i_rgb_encoder_disable,
> .enable = sun4i_rgb_encoder_enable,
> + .mode_valid = sun4i_rgb_encoder_mode_valid,
> };
>
> static void sun4i_rgb_enc_destroy(struct drm_encoder *encoder)
>
next prev parent reply other threads:[~2018-03-04 10:44 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-04 10:37 Giulio Benetti
2018-03-04 10:44 ` Giulio Benetti [this message]
2018-03-05 7:25 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=29f8b108-4087-9908-9e47-255100a32149@micronovasrl.com \
--to=giulio.benetti@micronovasrl.com \
--cc=airlied@linux.ie \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maxime.ripard@free-electrons.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®