mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Li Yang <leoli@freescale.com>
To: Segher Boessenkool <segher@kernel.crashing.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	linuxppc-dev@ozlabs.org, paulus@samba.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH] powerpc/mm: setting mmaped page cache property through  device tree
Date: Thu, 3 Dec 2009 14:15:05 +0800	[thread overview]
Message-ID: <2a27d3730912022215t3f575a24uc66e22fd653d8f3c@mail.gmail.com> (raw)
In-Reply-To: <0CED0757-67E3-4EAD-A2F7-AB8553559E94@kernel.crashing.org>

On Thu, Dec 3, 2009 at 12:15 PM, Segher Boessenkool
<segher@kernel.crashing.org> wrote:
>>>> The scenario for the first case is that in a multicore system running
>>>> ASMP which means different OS runs on different cores.  They might
>>>> communicate through a shared memory region.  The region on every OS
>>>> need to be mapped with the same cache perperty to avoid cache paradox.
>>>
>>> This isn't true.  In ASMP, you cannot usually do coherency between
>>> the different CPUs at all.  Also, in most PowerPC implementations,
>>
>> Coherency can't be achieved with proper configuration and management?  Why
>> so?
>
> Because different CPUs do not usually speak the same coherency protocol.
>
> However, it occurred to me that what you call ASMP is actually SMP where
> you run different OSes on the various cores?
>

Yup.  There might be some confusion on the ASMP definition.  But with
multi-core common in the market, new ASMP system may run on SMP-like
hardware.

>>> it is fine if one CPU maps a memory range as coherent while another
>>> maps it as non-coherent; sure, you have to be careful or you will
>>
>> But we do want the shared region to be coherent.  So mappings should
>> have the same cacheability property.
>
> No, they only need WIMG=xx1x on both sides.  Of course, IM=11 might not
> be a valid combination on your particular CPU, and it probably is better
> for performance to have the RAM cacheable anyway.

Agreed.  This patch also makes M bit configurable.

>
>>> So make the memory known to the kernel, just tell the kernel not to
>>> use it.  If it's normal system RAM, just put it in the "memory" node
>>> and do a memreserve on it (or do something in your platform code); if
>>> it's some other memory, do a device driver for it, map it there.
>>
>> Your solution is feasible.  But the memory allocation is a software
>> configuration.  IMHO, it should be better and easier addressed by
>> changing configurations(like mem parameter) rather than the kernel
>> platform code which should address hardware configuration.
>
> Either platform code or some other boot-time code, sure.
>
> The point is, you put the RAM in the device tree, so the kernel can
> know that particular range of physical address space is RAM, even
> if it doesn't use it itself.

If device tree always pass all the memory available, we need to
implement memmap= kernel cmdline parameter for powerpc in case the
memory used isn't start at address 0.  Maybe it's better that all
these information be passed with kernel parameter rather than device
tree for cross architecture portability.  What do you think?

- Leo

  reply	other threads:[~2009-12-03  6:15 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-12-01 10:30 Li Yang
2009-12-01 10:58 ` Benjamin Herrenschmidt
2009-12-01 11:34   ` Li Yang
2009-12-01 14:35     ` Segher Boessenkool
2009-12-02  6:25       ` Li Yang
2009-12-03  4:15         ` Segher Boessenkool
2009-12-03  6:15           ` Li Yang [this message]
2009-12-04  2:38       ` Benjamin Herrenschmidt
2009-12-04  2:37     ` Benjamin Herrenschmidt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2a27d3730912022215t3f575a24uc66e22fd653d8f3c@mail.gmail.com \
    --to=leoli@freescale.com \
    --cc=benh@kernel.crashing.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=paulus@samba.org \
    --cc=segher@kernel.crashing.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®