mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Len Brown <lenb@kernel.org>
To: x86@kernel.org, sfi-devel@simplefirmware.org,
	linux-kernel@vger.kernel.org, linux-acpi@vger.kernel.org
Cc: Feng Tang <feng.tang@intel.com>, Len Brown <len.brown@intel.com>
Subject: [PATCH 05/11] ACPI, x86: expose some IO-APIC routines when CONFIG_ACPI=n
Date: Fri, 14 Aug 2009 16:38:09 -0400	[thread overview]
Message-ID: <2a98e7573b83bac1a79292a428090ee352626216.1250281826.git.len.brown@intel.com> (raw)
In-Reply-To: <1250282295-25216-1-git-send-email-lenb@kernel.org>
In-Reply-To: <0763223ab0ef5c0016b7a179c1acccaabbefea02.1250281826.git.len.brown@intel.com>

From: Feng Tang <feng.tang@intel.com>

Some IO-APIC routines are ACPI specific now, but need to
be exposed when CONFIG_ACPI=n for the benefit of SFI.

Remove #ifdef ACPI around these routines:

io_apic_get_unique_id(int ioapic, int apic_id);
io_apic_get_version(int ioapic);
io_apic_get_redir_entries(int ioapic);

Move these routines from ACPI-specific boot.c to io_apic.c:

uniq_ioapic_id(u8 id)
mp_find_ioapic()
mp_find_ioapic_pin()
mp_register_ioapic()

Also, since uniq_ioapic_id() is now no longer static,
re-name it to io_apic_unique_id() for consistency
with the other public io_apic routines.

For simplicity, do not #ifdef the resulting code ACPI || SFI,
thought that could be done in the future if it is important
to optimize the !ACPI !SFI IO-APIC x86 kernel for size.

Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: x86@kernel.org
---
 arch/x86/include/asm/io_apic.h |   13 ++++-
 arch/x86/kernel/acpi/boot.c    |  102 +---------------------------------------
 arch/x86/kernel/apic/io_apic.c |  103 +++++++++++++++++++++++++++++++++++++--
 3 files changed, 109 insertions(+), 109 deletions(-)

diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index 330ee80..85232d3 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -150,11 +150,10 @@ extern int timer_through_8259;
 #define io_apic_assign_pci_irqs \
 	(mp_irq_entries && !skip_ioapic_setup && io_apic_irqs)
 
-#ifdef CONFIG_ACPI
+extern u8 io_apic_unique_id(u8 id);
 extern int io_apic_get_unique_id(int ioapic, int apic_id);
 extern int io_apic_get_version(int ioapic);
 extern int io_apic_get_redir_entries(int ioapic);
-#endif /* CONFIG_ACPI */
 
 struct io_apic_irq_attr;
 extern int io_apic_set_pci_routing(struct device *dev, int irq,
@@ -177,6 +176,16 @@ extern int setup_ioapic_entry(int apic, int irq,
 			      int polarity, int vector, int pin);
 extern void ioapic_write_entry(int apic, int pin,
 			       struct IO_APIC_route_entry e);
+
+struct mp_ioapic_gsi{
+	int gsi_base;
+	int gsi_end;
+};
+extern struct mp_ioapic_gsi  mp_gsi_routing[];
+int mp_find_ioapic(int gsi);
+int mp_find_ioapic_pin(int ioapic, int gsi);
+void __init mp_register_ioapic(int id, u32 address, u32 gsi_base);
+
 #else  /* !CONFIG_X86_IO_APIC */
 #define io_apic_assign_pci_irqs 0
 static const int timer_through_8259 = 0;
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 6b8ca3a..7e62d1e 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -833,106 +833,6 @@ static int __init acpi_parse_madt_lapic_entries(void)
 extern int es7000_plat;
 #endif
 
-static struct {
-	int gsi_base;
-	int gsi_end;
-} mp_ioapic_routing[MAX_IO_APICS];
-
-int mp_find_ioapic(int gsi)
-{
-	int i = 0;
-
-	/* Find the IOAPIC that manages this GSI. */
-	for (i = 0; i < nr_ioapics; i++) {
-		if ((gsi >= mp_ioapic_routing[i].gsi_base)
-		    && (gsi <= mp_ioapic_routing[i].gsi_end))
-			return i;
-	}
-
-	printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
-	return -1;
-}
-
-int mp_find_ioapic_pin(int ioapic, int gsi)
-{
-	if (WARN_ON(ioapic == -1))
-		return -1;
-	if (WARN_ON(gsi > mp_ioapic_routing[ioapic].gsi_end))
-		return -1;
-
-	return gsi - mp_ioapic_routing[ioapic].gsi_base;
-}
-
-static u8 __init uniq_ioapic_id(u8 id)
-{
-#ifdef CONFIG_X86_32
-	if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
-	    !APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
-		return io_apic_get_unique_id(nr_ioapics, id);
-	else
-		return id;
-#else
-	int i;
-	DECLARE_BITMAP(used, 256);
-	bitmap_zero(used, 256);
-	for (i = 0; i < nr_ioapics; i++) {
-		struct mpc_ioapic *ia = &mp_ioapics[i];
-		__set_bit(ia->apicid, used);
-	}
-	if (!test_bit(id, used))
-		return id;
-	return find_first_zero_bit(used, 256);
-#endif
-}
-
-static int bad_ioapic(unsigned long address)
-{
-	if (nr_ioapics >= MAX_IO_APICS) {
-		printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
-		       "(found %d)\n", MAX_IO_APICS, nr_ioapics);
-		panic("Recompile kernel with bigger MAX_IO_APICS!\n");
-	}
-	if (!address) {
-		printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address"
-		       " found in table, skipping!\n");
-		return 1;
-	}
-	return 0;
-}
-
-void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
-{
-	int idx = 0;
-
-	if (bad_ioapic(address))
-		return;
-
-	idx = nr_ioapics;
-
-	mp_ioapics[idx].type = MP_IOAPIC;
-	mp_ioapics[idx].flags = MPC_APIC_USABLE;
-	mp_ioapics[idx].apicaddr = address;
-
-	set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
-	mp_ioapics[idx].apicid = uniq_ioapic_id(id);
-	mp_ioapics[idx].apicver = io_apic_get_version(idx);
-
-	/*
-	 * Build basic GSI lookup table to facilitate gsi->io_apic lookups
-	 * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
-	 */
-	mp_ioapic_routing[idx].gsi_base = gsi_base;
-	mp_ioapic_routing[idx].gsi_end = gsi_base +
-	    io_apic_get_redir_entries(idx);
-
-	printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, "
-	       "GSI %d-%d\n", idx, mp_ioapics[idx].apicid,
-	       mp_ioapics[idx].apicver, mp_ioapics[idx].apicaddr,
-	       mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end);
-
-	nr_ioapics++;
-}
-
 int __init acpi_probe_gsi(void)
 {
 	int idx;
@@ -947,7 +847,7 @@ int __init acpi_probe_gsi(void)
 
 	max_gsi = 0;
 	for (idx = 0; idx < nr_ioapics; idx++) {
-		gsi = mp_ioapic_routing[idx].gsi_end;
+		gsi = mp_gsi_routing[idx].gsi_end;
 
 		if (gsi > max_gsi)
 			max_gsi = gsi;
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index d2ed6c5..a8c0232 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -85,6 +85,9 @@ int nr_ioapic_registers[MAX_IO_APICS];
 struct mpc_ioapic mp_ioapics[MAX_IO_APICS];
 int nr_ioapics;
 
+/* IO APIC gsi routing info */
+struct mp_ioapic_gsi  mp_gsi_routing[MAX_IO_APICS];
+
 /* MP IRQ source entries */
 struct mpc_intsrc mp_irqs[MAX_IRQ_SOURCES];
 
@@ -3941,11 +3944,28 @@ int io_apic_set_pci_routing(struct device *dev, int irq,
 	return __io_apic_set_pci_routing(dev, irq, irq_attr);
 }
 
-/* --------------------------------------------------------------------------
-                          ACPI-based IOAPIC Configuration
-   -------------------------------------------------------------------------- */
+u8 __init io_apic_unique_id(u8 id)
+{
+#ifdef CONFIG_X86_32
+	if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
+	    !APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
+		return io_apic_get_unique_id(nr_ioapics, id);
+	else
+		return id;
+#else
+	int i;
+	DECLARE_BITMAP(used, 256);
 
-#ifdef CONFIG_ACPI
+	bitmap_zero(used, 256);
+	for (i = 0; i < nr_ioapics; i++) {
+		struct mpc_ioapic *ia = &mp_ioapics[i];
+		__set_bit(ia->apicid, used);
+	}
+	if (!test_bit(id, used))
+		return id;
+	return find_first_zero_bit(used, 256);
+#endif
+}
 
 #ifdef CONFIG_X86_32
 int __init io_apic_get_unique_id(int ioapic, int apic_id)
@@ -4054,8 +4074,6 @@ int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
 	return 0;
 }
 
-#endif /* CONFIG_ACPI */
-
 /*
  * This function currently is only a helper for the i386 smp boot process where
  * we need to reprogram the ioredtbls to cater for the cpus which have come online
@@ -4201,3 +4219,76 @@ void __init ioapic_insert_resources(void)
 		r++;
 	}
 }
+
+int mp_find_ioapic(int gsi)
+{
+	int i = 0;
+
+	/* Find the IOAPIC that manages this GSI. */
+	for (i = 0; i < nr_ioapics; i++) {
+		if ((gsi >= mp_gsi_routing[i].gsi_base)
+		    && (gsi <= mp_gsi_routing[i].gsi_end))
+			return i;
+	}
+
+	printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
+	return -1;
+}
+
+int mp_find_ioapic_pin(int ioapic, int gsi)
+{
+	if (WARN_ON(ioapic == -1))
+		return -1;
+	if (WARN_ON(gsi > mp_gsi_routing[ioapic].gsi_end))
+		return -1;
+
+	return gsi - mp_gsi_routing[ioapic].gsi_base;
+}
+
+static int bad_ioapic(unsigned long address)
+{
+	if (nr_ioapics >= MAX_IO_APICS) {
+		printk(KERN_WARNING "WARING: Max # of I/O APICs (%d) exceeded "
+		       "(found %d), skipping\n", MAX_IO_APICS, nr_ioapics);
+		return 1;
+	}
+	if (!address) {
+		printk(KERN_WARNING "WARNING: Bogus (zero) I/O APIC address"
+		       " found in table, skipping!\n");
+		return 1;
+	}
+	return 0;
+}
+
+void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
+{
+	int idx = 0;
+
+	if (bad_ioapic(address))
+		return;
+
+	idx = nr_ioapics;
+
+	mp_ioapics[idx].type = MP_IOAPIC;
+	mp_ioapics[idx].flags = MPC_APIC_USABLE;
+	mp_ioapics[idx].apicaddr = address;
+
+	set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
+	mp_ioapics[idx].apicid = io_apic_unique_id(id);
+	mp_ioapics[idx].apicver = io_apic_get_version(idx);
+
+	/*
+	 * Build basic GSI lookup table to facilitate gsi->io_apic lookups
+	 * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
+	 */
+	mp_gsi_routing[idx].gsi_base = gsi_base;
+	mp_gsi_routing[idx].gsi_end = gsi_base +
+	    io_apic_get_redir_entries(idx);
+
+	printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, "
+	       "GSI %d-%d\n", idx, mp_ioapics[idx].apicid,
+	       mp_ioapics[idx].apicver, mp_ioapics[idx].apicaddr,
+	       mp_gsi_routing[idx].gsi_base, mp_gsi_routing[idx].gsi_end);
+
+	nr_ioapics++;
+}
-- 
1.6.0.6


  parent reply	other threads:[~2009-08-14 20:40 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-08-14 20:38 [PATCH 00/11] SFI: Simple Firmware Interface - v3 Len Brown
2009-08-14 20:38 ` [PATCH 01/11] ACPI: Move definition of PREFIX from acpi_bus.h to internal..h Len Brown
2009-08-14 20:38   ` [PATCH 02/11] ACPI, PCI: Change PREFIX to "PCI" from "ACPI" in mmconfig-shared.c Len Brown
2009-08-14 20:38   ` [PATCH 03/11] ACPI: check acpi_disabled in acpi_table_parse() and acpi_table_parse_entries() Len Brown
2009-08-14 20:38   ` [PATCH 04/11] ACPI: Handle CONFIG_ACPI=n better from linux/acpi.h Len Brown
2009-08-14 20:38   ` Len Brown [this message]
2009-08-14 20:38   ` [PATCH 06/11] SFI: Simple Firmware Interface - MAINTAINERS, Kconfig Len Brown
2009-08-14 20:38   ` [PATCH 07/11] SFI: create linux/sfi.h Len Brown
2009-08-14 20:38   ` [PATCH 08/11] SFI: add platform-independent core support Len Brown
2009-08-14 20:38   ` [PATCH 09/11] SFI: add capability to parse ACPI tables Len Brown
2009-08-14 20:38   ` [PATCH 10/11] x86: add arch-specific SFI support Len Brown
2009-08-14 20:38   ` [PATCH 11/11] SFI: Hook PCI MMCONFIG Len Brown
2009-08-17 10:06 ` [PATCH 00/11] SFI: Simple Firmware Interface - v3 Ingo Molnar
2009-08-29  0:14   ` Len Brown
2009-08-29  7:34     ` Ingo Molnar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2a98e7573b83bac1a79292a428090ee352626216.1250281826.git.len.brown@intel.com \
    --to=lenb@kernel.org \
    --cc=feng.tang@intel.com \
    --cc=len.brown@intel.com \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sfi-devel@simplefirmware.org \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®