Re: [PATCH] drm: bridge: dw-hdmi: fix input format/encoding from plat_data

[Neil Armstrong <narmstrong@baylibre.com>]

On 04/06/2017 11:34 AM, Neil Armstrong wrote:
> The plat_data->input_bus_format and plat_data->input_bus_encoding
> are unsigned long and are alsways >=0, but the value 0 was still
> considered as RGB888 like the default behaviour.
> 
> This patch changes the if test to > 0.
> 
> Thanks to Dan Carpenter for his bug report at [1].
> 
> Tested on Amlogic P230 (with CSC enabled for YUV444 to RGB) and Rockchip
> RK3288 ACT8846 EVB Board (no CSC involved, direct RGB passthrough).
> 
> [1] http://lkml.kernel.org/r/20170406052120.GA26578@mwanda

Forgot...

Fixes: def23aa7e982 ("drm: bridge: dw-hdmi: Switch to V4L bus format and encodings")

> 
> Cc: Dan Carpenter <dan.carpenter@oracle.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> index 8b60503..100e1ee 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> @@ -1668,14 +1668,14 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode)
>  	hdmi->hdmi_data.video_mode.mpixelrepetitioninput = 0;
>  
>  	/* TOFIX: Get input format from plat data or fallback to RGB888 */
> -	if (hdmi->plat_data->input_bus_format >= 0)
> +	if (hdmi->plat_data->input_bus_format)
>  		hdmi->hdmi_data.enc_in_bus_format =
>  			hdmi->plat_data->input_bus_format;
>  	else
>  		hdmi->hdmi_data.enc_in_bus_format = MEDIA_BUS_FMT_RGB888_1X24;
>  
>  	/* TOFIX: Get input encoding from plat data or fallback to none */
> -	if (hdmi->plat_data->input_bus_encoding >= 0)
> +	if (hdmi->plat_data->input_bus_encoding)
>  		hdmi->hdmi_data.enc_in_encoding =
>  			hdmi->plat_data->input_bus_encoding;
>  	else
>