From: Priyansh Jain <quic_priyjain@quicinc.com>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Amit Kucheria <amitk@kernel.org>,
Thara Gopinath <thara.gopinath@gmail.com>,
"Rafael J . Wysocki" <rafael@kernel.org>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Zhang Rui <rui.zhang@intel.com>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: <linux-arm-msm@vger.kernel.org>, <linux-pm@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<quic_manafm@quicinc.com>
Subject: Re: [PATCH v2 2/2] arm64: dts: qcom: Enable tsens and thermal for sa8775p SoC
Date: Mon, 11 Sep 2023 14:09:45 +0530 [thread overview]
Message-ID: <2b685fdc-d1c7-72ae-636d-a78f41409005@quicinc.com> (raw)
In-Reply-To: <20230824123001.26778-3-quic_priyjain@quicinc.com>
Gentle Reminder.
Addressed the comments from previous v1 patch, Please review the v2 patch.
On 8/24/2023 6:00 PM, Priyansh Jain wrote:
> Add tsens and thermal devicetree node for sa8775p SoC.
>
> Signed-off-by: Priyansh Jain <quic_priyjain@quicinc.com>
> ---
> arch/arm64/boot/dts/qcom/sa8775p.dtsi | 1096 +++++++++++++++++++++++++
> 1 file changed, 1096 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> index b130136acffe..abba42ea5946 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> @@ -2306,6 +2306,1102 @@
>
> #freq-domain-cells = <1>;
> };
> +
> + tsens0: thermal-sensor@c222000 {
> + compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
> + reg = <0x0 0x0c263000 0x0 0x1ff>,
> + <0x0 0x0c222000 0x0 0x8>;
> + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
> + #qcom,sensors = <12>;
> + interrupt-names = "uplow", "critical";
> + #thermal-sensor-cells = <1>;
> + };
> +
> + tsens1: thermal-sensor@c223000 {
> + compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
> + reg = <0x0 0x0c265000 0x0 0x1ff>,
> + <0x0 0x0c223000 0x0 0x8>;
> + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
> + #qcom,sensors = <12>;
> + interrupt-names = "uplow", "critical";
> + #thermal-sensor-cells = <1>;
> + };
> +
> + tsens2: thermal-sensor@c224000 {
> + compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
> + reg = <0x0 0x0c251000 0x0 0x1ff>,
> + <0x0 0x0c224000 0x0 0x8>;
> + interrupts = <GIC_SPI 572 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 609 IRQ_TYPE_LEVEL_HIGH>;
> + #qcom,sensors = <13>;
> + interrupt-names = "uplow", "critical";
> + #thermal-sensor-cells = <1>;
> + };
> +
> + tsens3: thermal-sensor@c225000 {
> + compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
> + reg = <0x0 0x0c252000 0x0 0x1ff>,
> + <0x0 0x0c225000 0x0 0x8>;
> + interrupts = <GIC_SPI 573 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 610 IRQ_TYPE_LEVEL_HIGH>;
> + #qcom,sensors = <13>;
> + interrupt-names = "uplow", "critical";
> + #thermal-sensor-cells = <1>;
> + };
> +
> + thermal_zones: thermal-zones {
> + aoss-0-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens0 0>;
> +
> + trips {
> + aoss0_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + aoss0_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpu-0-0-0-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens0 1>;
> +
> + trips {
> + cpu000_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + cpu000_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpu-0-1-0-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens0 2>;
> +
> + trips {
> + cpu010_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + cpu010_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpu-0-2-0-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens0 3>;
> +
> + trips {
> + cpu020_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + cpu020_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpu-0-3-0-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens0 4>;
> +
> + trips {
> + cpu030_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + cpu030_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + gpuss-0-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens0 5>;
> +
> + trips {
> + gpuss0_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + gpuss0_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + gpuss-1-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens0 6>;
> +
> + trips {
> + gpuss1_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + gpuss1_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + gpuss-2-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens0 7>;
> +
> + trips {
> + gpuss2_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + gpuss2_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + audio-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens0 8>;
> +
> + trips {
> + audio_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + audio_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + camss-0-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens0 9>;
> +
> + trips {
> + camss0_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + camss0_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + pcie-0-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens0 10>;
> +
> + trips {
> + pcie0_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + pcie0_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpuss-0-0-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens0 11>;
> +
> + trips {
> + cpuss00_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + cpuss00_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + aoss-1-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens1 0>;
> +
> + trips {
> + aoss1_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + aoss1_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpu-0-0-1-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens1 1>;
> +
> + trips {
> + cpu001_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + cpu001_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpu-0-1-1-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens1 2>;
> +
> + trips {
> + cpu011_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + cpu011_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpu-0-2-1-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens1 3>;
> +
> + trips {
> + cpu021_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + cpu021_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpu-0-3-1-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens1 4>;
> +
> + trips {
> + cpu031_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + cpu031_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + gpuss-3-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens1 5>;
> +
> + trips {
> + gpuss3_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + gpuss3_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + gpuss-4-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens1 6>;
> +
> + trips {
> + gpuss4_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + gpuss4_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + gpuss-5-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens1 7>;
> +
> + trips {
> + gpuss5_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + gpuss5_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + video-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens1 8>;
> +
> + trips {
> + video_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + video_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + camss-1-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens1 9>;
> +
> + trips {
> + camss1_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + camss1_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + pcie-1-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens1 10>;
> +
> + trips {
> + pcie1_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + pcie1_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpuss-0-1-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens1 11>;
> +
> + trips {
> + cpuss01_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + cpuss01_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + aoss-2-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens2 0>;
> +
> + trips {
> + aoss2_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + aoss2_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpu-1-0-0-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens2 1>;
> +
> + trips {
> + cpu100_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + cpu100_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpu-1-1-0-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens2 2>;
> +
> + trips {
> + cpu110_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + cpu110_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpu-1-2-0-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens2 3>;
> +
> + trips {
> + cpu120_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + cpu120_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpu-1-3-0-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens2 4>;
> +
> + trips {
> + cpu130_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + cpu130_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + nsp-0-0-0-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens2 5>;
> +
> + trips {
> + nsp000_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + nsp000_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + nsp-0-1-0-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens2 6>;
> +
> + trips {
> + nsp010_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + nsp010_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + nsp-0-2-0-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens2 7>;
> +
> + trips {
> + nsp020_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + nsp020_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + nsp-1-0-0-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens2 8>;
> +
> + trips {
> + nsp100_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + nsp100_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + nsp-1-1-0-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens2 9>;
> +
> + trips {
> + nsp110_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + nsp110_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + nsp-1-2-0-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens2 10>;
> +
> + trips {
> + nsp120_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + nsp120_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + ddrss-0-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens2 11>;
> +
> + trips {
> + ddrss0_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + ddrss0_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpuss-1-0-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens2 12>;
> +
> + trips {
> + cpuss10_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + cpuss10_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + aoss-3-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens3 0>;
> +
> + trips {
> + aoss3_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + aoss3_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpu-1-0-1-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens3 1>;
> +
> + trips {
> + cpu101_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + cpu101_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpu-1-1-1-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens3 2>;
> +
> + trips {
> + cpu111_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + cpu111_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpu-1-2-1-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens3 3>;
> +
> + trips {
> + cpu121_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + cpu121_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpu-1-3-1-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens3 4>;
> +
> + trips {
> + cpu131_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + cpu131_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + nsp-0-0-1-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens3 5>;
> +
> + trips {
> + nsp001_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + nsp001_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + nsp-0-1-1-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens3 6>;
> +
> + trips {
> + nsp011_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + nsp011_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + nsp-0-2-1-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens3 7>;
> +
> + trips {
> + nsp021_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + nsp021_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + nsp-1-0-1-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens3 8>;
> +
> + trips {
> + nsp101_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + nsp101_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + nsp-1-1-1-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens3 9>;
> +
> + trips {
> + nsp111_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + nsp111_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + nsp-1-2-1-thermal {
> + polling-delay-passive = <10>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens3 10>;
> +
> + trips {
> + nsp121_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + nsp121_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + ddrss-1-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens3 11>;
> +
> + trips {
> + ddrss1_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + ddrss1_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> +
> + cpuss-1-1-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&tsens3 12>;
> +
> + trips {
> + cpuss11_alert0: trip-point0 {
> + temperature = <105000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> +
> + cpuss11_alert1: trip-point1 {
> + temperature = <115000>;
> + hysteresis = <5000>;
> + type = "passive";
> + };
> + };
> + };
> + };
> };
>
> arch_timer: timer {
next prev parent reply other threads:[~2023-09-11 21:58 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-24 12:29 [PATCH v2 0/2] " Priyansh Jain
2023-08-24 12:30 ` [PATCH v2 1/2] dt-bindings: thermal: tsens: Add sa8775p compatible Priyansh Jain
2023-08-24 14:23 ` Krzysztof Kozlowski
2023-08-24 12:30 ` [PATCH v2 2/2] arm64: dts: qcom: Enable tsens and thermal for sa8775p SoC Priyansh Jain
2023-09-11 8:39 ` Priyansh Jain [this message]
2023-09-20 2:36 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2b685fdc-d1c7-72ae-636d-a78f41409005@quicinc.com \
--to=quic_priyjain@quicinc.com \
--cc=agross@kernel.org \
--cc=amitk@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=quic_manafm@quicinc.com \
--cc=rafael@kernel.org \
--cc=robh+dt@kernel.org \
--cc=rui.zhang@intel.com \
--cc=thara.gopinath@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®