Re: [RFC/RFT 09/10] i2c: s3c2410: use core helper to mark adapter suspended

[Marek Szyprowski <m.szyprowski@samsung.com>]

Hi,

On 2018-12-10 22:03, Wolfram Sang wrote:
> Rejecting transfers should be handled by the core. Also, this will
> ensure proper locking which was forgotten in this open coded version.
>
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>

Works fine on Odroid U3.

> ---
>  drivers/i2c/busses/i2c-s3c2410.c | 8 ++------
>  1 file changed, 2 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
> index 2f2e28d60ef5..7c76edb25514 100644
> --- a/drivers/i2c/busses/i2c-s3c2410.c
> +++ b/drivers/i2c/busses/i2c-s3c2410.c
> @@ -104,7 +104,6 @@ enum s3c24xx_i2c_state {
>  struct s3c24xx_i2c {
>  	wait_queue_head_t	wait;
>  	kernel_ulong_t		quirks;
> -	unsigned int		suspended:1;
>  
>  	struct i2c_msg		*msg;
>  	unsigned int		msg_num;
> @@ -703,9 +702,6 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c,
>  	unsigned long timeout;
>  	int ret;
>  
> -	if (i2c->suspended)
> -		return -EIO;
> -
>  	ret = s3c24xx_i2c_set_master(i2c);
>  	if (ret != 0) {
>  		dev_err(i2c->dev, "cannot get bus (error %d)\n", ret);
> @@ -1246,7 +1242,7 @@ static int s3c24xx_i2c_suspend_noirq(struct device *dev)
>  {
>  	struct s3c24xx_i2c *i2c = dev_get_drvdata(dev);
>  
> -	i2c->suspended = 1;
> +	i2c_mark_adapter_suspended(&i2c->adap, true);
>  
>  	if (!IS_ERR(i2c->sysreg))
>  		regmap_read(i2c->sysreg, EXYNOS5_SYS_I2C_CFG, &i2c->sys_i2c_cfg);
> @@ -1267,7 +1263,7 @@ static int s3c24xx_i2c_resume_noirq(struct device *dev)
>  		return ret;
>  	s3c24xx_i2c_init(i2c);
>  	clk_disable(i2c->clk);
> -	i2c->suspended = 0;
> +	i2c_mark_adapter_suspended(&i2c->adap, false);
>  
>  	return 0;
>  }

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland