[PATCH] esp_scsi: Clear Transfer Count registers before PIO transfers

[Finn Thain <fthain@telegraphics.com.au>]

The zorro_esp driver uses both PIO and DMA transfers. If a failed DMA
transfer happened to be followed by a PIO transfer, the TCLOW and TCMED
registers would not get cleared. It is theoretically possible that the
stale value from the transfer counter or the TCLOW/TCMED registers
could then be used by the controller and the driver. Avoid that by
clearing these registers before each PIO transfer.

Cc: Michael Schmitz <schmitzmic@gmail.com>
Cc: Kars de Jong <jongk@linux-m68k.org>
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
---
 drivers/scsi/esp_scsi.c | 3 +++
 drivers/scsi/mac_esp.c  | 2 --
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/esp_scsi.c b/drivers/scsi/esp_scsi.c
index bb88995a12c7..afbef83f5dd9 100644
--- a/drivers/scsi/esp_scsi.c
+++ b/drivers/scsi/esp_scsi.c
@@ -2835,6 +2835,9 @@ void esp_send_pio_cmd(struct esp *esp, u32 addr, u32 esp_count,
 	cmd &= ~ESP_CMD_DMA;
 	esp->send_cmd_error = 0;
 
+	esp_write8(0, ESP_TCLOW);
+	esp_write8(0, ESP_TCMED);
+
 	if (write) {
 		u8 *dst = (u8 *)addr;
 		u8 mask = ~(phase == ESP_MIP ? ESP_INTR_FDONE : ESP_INTR_BSERV);
diff --git a/drivers/scsi/mac_esp.c b/drivers/scsi/mac_esp.c
index 1c78bc10c790..797579247e47 100644
--- a/drivers/scsi/mac_esp.c
+++ b/drivers/scsi/mac_esp.c
@@ -361,8 +361,6 @@ static int esp_mac_probe(struct platform_device *dev)
 	esp->flags = ESP_FLAG_NO_DMA_MAP;
 	if (mep->pdma_io == NULL) {
 		printk(KERN_INFO PFX "using PIO for controller %d\n", dev->id);
-		esp_write8(0, ESP_TCLOW);
-		esp_write8(0, ESP_TCMED);
 		esp->flags |= ESP_FLAG_DISABLE_SYNC;
 		mac_esp_ops.send_dma_cmd = esp_send_pio_cmd;
 	} else {
-- 
2.23.0