mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Zhang, Rui" <rui.zhang@intel.com>
To: "srinivas.pandruvada@linux.intel.com" 
	<srinivas.pandruvada@linux.intel.com>,
	"rafael@kernel.org" <rafael@kernel.org>,
	"daniel.lezcano@linaro.org" <daniel.lezcano@linaro.org>
Cc: "linux-pm@vger.kernel.org" <linux-pm@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 2/7] thermal: int340x: processor_thermal: Add interrupt configuration
Date: Wed, 21 Jun 2023 14:50:19 +0000	[thread overview]
Message-ID: <2bdbba78c1e3162bd7e385ed48715fd949133253.camel@intel.com> (raw)
In-Reply-To: <20230620230150.3068704-3-srinivas.pandruvada@linux.intel.com>

On Tue, 2023-06-20 at 16:01 -0700, Srinivas Pandruvada wrote:
> Some features on this PCI devices require interrupt support. Here
> interrupts are enabled/disabled via sending mailbox commands. The
> mailbox command ID is 0x1E for read and 0x1F for write.
> 
> The interrupt configuration will require mutex protection as it
> involved read-modify-write operation. Since mutex are already used
> in the mailbox read/write functions: send_mbox_write_cmd() and
> send_mbox_read_cmd(), there will be double locking. But, this can
> be avoided by moving mutexes from mailbox read/write processing
> functions to the calling (exported) functions.
> 
> Signed-off-by: Srinivas Pandruvada
> <srinivas.pandruvada@linux.intel.com>
> ---
>  .../processor_thermal_device.h                |  2 +
>  .../int340x_thermal/processor_thermal_mbox.c  | 85 ++++++++++++++---
> --
>  2 files changed, 68 insertions(+), 19 deletions(-)
> 
> diff --git
> a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.h
> b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.h
> index 7cdeca2edc21..defc919cb020 100644
> ---
> a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.h
> +++
> b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.h
> @@ -91,6 +91,8 @@ void proc_thermal_wlt_req_remove(struct pci_dev
> *pdev);
>  
>  int processor_thermal_send_mbox_read_cmd(struct pci_dev *pdev, u16
> id, u64 *resp);
>  int processor_thermal_send_mbox_write_cmd(struct pci_dev *pdev, u16
> id, u32 data);
> +int processor_thermal_mbox_interrupt_config(struct pci_dev *pdev,
> bool enable, int enable_bit,
> +                                           int time_window);
>  int proc_thermal_add(struct device *dev, struct proc_thermal_device
> *priv);
>  void proc_thermal_remove(struct proc_thermal_device *proc_priv);
>  int proc_thermal_suspend(struct device *dev);
> diff --git
> a/drivers/thermal/intel/int340x_thermal/processor_thermal_mbox.c
> b/drivers/thermal/intel/int340x_thermal/processor_thermal_mbox.c
> index ec766c5615b7..7ef0af3f5bef 100644
> --- a/drivers/thermal/intel/int340x_thermal/processor_thermal_mbox.c
> +++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_mbox.c
> @@ -45,23 +45,16 @@ static int send_mbox_write_cmd(struct pci_dev
> *pdev, u16 id, u32 data)
>         int ret;
>  
>         proc_priv = pci_get_drvdata(pdev);
> -
> -       mutex_lock(&mbox_lock);
> -
>         ret = wait_for_mbox_ready(proc_priv);
>         if (ret)
> -               goto unlock_mbox;
> +               return ret;
>  
>         writel(data, (proc_priv->mmio_base + MBOX_OFFSET_DATA));
>         /* Write command register */
>         reg_data = BIT_ULL(MBOX_BUSY_BIT) | id;
>         writel(reg_data, (proc_priv->mmio_base +
> MBOX_OFFSET_INTERFACE));
>  
> -       ret = wait_for_mbox_ready(proc_priv);
> -
> -unlock_mbox:
> -       mutex_unlock(&mbox_lock);
> -       return ret;
> +       return wait_for_mbox_ready(proc_priv);
>  }
>  
>  static int send_mbox_read_cmd(struct pci_dev *pdev, u16 id, u64
> *resp)
> @@ -71,12 +64,9 @@ static int send_mbox_read_cmd(struct pci_dev
> *pdev, u16 id, u64 *resp)
>         int ret;
>  
>         proc_priv = pci_get_drvdata(pdev);
> -
> -       mutex_lock(&mbox_lock);
> -
>         ret = wait_for_mbox_ready(proc_priv);
>         if (ret)
> -               goto unlock_mbox;
> +               return ret;
>  
>         /* Write command register */
>         reg_data = BIT_ULL(MBOX_BUSY_BIT) | id;
> @@ -84,28 +74,85 @@ static int send_mbox_read_cmd(struct pci_dev
> *pdev, u16 id, u64 *resp)
>  
>         ret = wait_for_mbox_ready(proc_priv);
>         if (ret)
> -               goto unlock_mbox;
> +               return ret;
>  
>         if (id == MBOX_CMD_WORKLOAD_TYPE_READ)
>                 *resp = readl(proc_priv->mmio_base +
> MBOX_OFFSET_DATA);
>         else
>                 *resp = readq(proc_priv->mmio_base +
> MBOX_OFFSET_DATA);
>  
> -unlock_mbox:
> -       mutex_unlock(&mbox_lock);
> -       return ret;
> +       return 0;
>  }
>  
>  int processor_thermal_send_mbox_read_cmd(struct pci_dev *pdev, u16
> id, u64 *resp)
>  {
> -       return send_mbox_read_cmd(pdev, id, resp);
> +       int ret;
> +
> +       mutex_lock(&mbox_lock);
> +       ret = send_mbox_read_cmd(pdev, id, resp);
> +       mutex_unlock(&mbox_lock);
> +
> +       return ret;
>  }
>  EXPORT_SYMBOL_NS_GPL(processor_thermal_send_mbox_read_cmd,
> INT340X_THERMAL);
>  
>  int processor_thermal_send_mbox_write_cmd(struct pci_dev *pdev, u16
> id, u32 data)
>  {
> -       return send_mbox_write_cmd(pdev, id, data);
> +       int ret;
> +
> +       mutex_lock(&mbox_lock);
> +       ret = send_mbox_write_cmd(pdev, id, data);
> +       mutex_unlock(&mbox_lock);
> +
> +       return ret;
>  }
>  EXPORT_SYMBOL_NS_GPL(processor_thermal_send_mbox_write_cmd,
> INT340X_THERMAL);
>  
> +#define MBOX_CAMARILLO_RD_INTR_CONFIG  0x1E
> +#define MBOX_CAMARILLO_WR_INTR_CONFIG  0x1F
> +#define WLT_TW_MASK                    GENMASK_ULL(30, 24)
> +#define SOC_PREDICTION_TW_SHIFT                24
> +
> +int processor_thermal_mbox_interrupt_config(struct pci_dev *pdev,
> bool enable,
> +                                           int enable_bit, int
> time_window)

All the callers of this API in this patch series uses
SOC_WLT_PREDICTION_INT_ENABLE_BIT as the enable_bit, so this parameter
is redundant?
or do we expect a different enable_bit on other/future platforms?

thanks,
rui

> +{
> +       u64 data;
> +       int ret;
> +
> +       if (!pdev)
> +               return -ENODEV;
> +
> +       mutex_lock(&mbox_lock);
> +
> +       /* Do read modify write for MBOX_CAMARILLO_RD_INTR_CONFIG */
> +
> +       ret = send_mbox_read_cmd(pdev,
> MBOX_CAMARILLO_RD_INTR_CONFIG,  &data);
> +       if (ret) {
> +               dev_err(&pdev->dev, "MBOX_CAMARILLO_RD_INTR_CONFIG
> failed\n");
> +               goto unlock;
> +       }
> +
> +       if (time_window >= 0) {
> +               data &= ~WLT_TW_MASK;
> +
> +               /* Program notification delay */
> +               data |= (time_window << SOC_PREDICTION_TW_SHIFT);
> +       }
> +
> +       if (enable)
> +               data |= BIT(enable_bit);
> +       else
> +               data &= ~BIT(enable_bit);
> +
> +       ret = send_mbox_write_cmd(pdev,
> MBOX_CAMARILLO_WR_INTR_CONFIG, data);
> +       if (ret)
> +               dev_err(&pdev->dev, "MBOX_CAMARILLO_WR_INTR_CONFIG
> failed\n");
> +
> +unlock:
> +       mutex_unlock(&mbox_lock);
> +
> +       return ret;
> +}
> +EXPORT_SYMBOL_NS_GPL(processor_thermal_mbox_interrupt_config,
> INT340X_THERMAL);
> +
>  MODULE_LICENSE("GPL v2");


  reply	other threads:[~2023-06-21 14:58 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-20 23:01 [PATCH 0/7] thermal: processor_thermal: Suport workload hint Srinivas Pandruvada
2023-06-20 23:01 ` [PATCH 1/7] thermal: int340x: processor_thermal: Move mailbox code to common module Srinivas Pandruvada
2023-06-21 14:35   ` Zhang, Rui
2023-06-20 23:01 ` [PATCH 2/7] thermal: int340x: processor_thermal: Add interrupt configuration Srinivas Pandruvada
2023-06-21 14:50   ` Zhang, Rui [this message]
2023-06-21 15:02     ` srinivas pandruvada
2023-06-20 23:01 ` [PATCH 3/7] thermal: int340x: processor_thermal: Use non MSI interrupts Srinivas Pandruvada
2023-06-21 14:53   ` Zhang, Rui
2023-06-21 15:02     ` srinivas pandruvada
2023-06-20 23:01 ` [PATCH 4/7] thermal/drivers/int340x: Remove PROC_THERMAL_FEATURE_WLT_REQ for Meteor Lake Srinivas Pandruvada
2023-06-21 14:54   ` Zhang, Rui
2023-06-20 23:01 ` [PATCH 5/7] thermal: int340x: processor_thermal: Add workload type hint Srinivas Pandruvada
2023-06-21 14:12   ` Zhang, Rui
2023-06-20 23:01 ` [PATCH 6/7] thermal/drivers/int340x: Support workload hint interrupts Srinivas Pandruvada
2023-06-20 23:01 ` [PATCH 7/7] selftests/thermel/intel: Add test to read workload hint Srinivas Pandruvada
2023-06-21 14:30   ` Zhang, Rui
2023-06-21 14:40     ` srinivas pandruvada
2023-06-21 14:58     ` Zhang, Rui
2023-06-21 14:58 ` [PATCH 0/7] thermal: processor_thermal: Suport " Rafael J. Wysocki
2023-06-21 15:45   ` srinivas pandruvada

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2bdbba78c1e3162bd7e385ed48715fd949133253.camel@intel.com \
    --to=rui.zhang@intel.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=rafael@kernel.org \
    --cc=srinivas.pandruvada@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®