From: Andreas Puhm <puhm@oregano.at>
To: Alan Tull <atull@kernel.org>, Moritz Fischer <mdf@kernel.org>
Cc: "linux-fpga@vger.kernel.org" <linux-fpga@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: [Bug] altera_cvp registers a PCI device (Altera/Intel FPGA) without verifying that it supports CVP
Date: Fri, 19 Oct 2018 15:53:02 +0000 [thread overview]
Message-ID: <2c6313a3f7c04b70b8a06a50934fe27a@SRV177.busymouse24.de> (raw)
Hello,
I hope the following information is descriptive enough.
If this is no the case, I will provide further details.
--------------------------------------------------------------------
Full description:
The altera_cvp probe function only checks,
if the Altera/Intel PCI device configuration space contains a vendor specific entry (VSEC Capability Header 0x000b) at offset 0x200.
But the probe function does not verify, if the PCI device (and further the FPGA),
for which it has been called, actually supports the Configure-via-Protocol feature.
The PCI device (FPGA) can explicitly disable the Configur-via-Protocol (CvP) feature by setting the CVP_EN bit, index 20 of CVP_STATUS register, to '0'.
As the altera_cvp probe function does not check this it registers the device in any way.
At this point, the altera_cvp module cannot be used to program this device via CvP.
In addition no other module can use the device, as it is still registered by altera_cvp.
Keywords: altera_cvp module, PCI, Configure-via-Protocol
Kernel version: problem occured with v4.15, should occur from 4.14+
Instructions to reproduce:
Proper hardware is necessary to reproduce this, i.e., FPGA with instantiated Altera/Intel PCIe IP Core with disabled CvP feature.
Workaround:
It is possible to circumvent this problem by manually unloading or blacklisting the altera_cvp module.
Suggested Patch:
This patch was successfully build and tested for 4.15 and 4.18
Subject: [PATCH] register device only, if it supports CvP operation
This patch is based on: git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tag/?h=v4.18
Signed-off-by: Andreas Puhm <puhm@oregano.at>
---
drivers/fpga/altera-cvp.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/fpga/altera-cvp.c b/drivers/fpga/altera-cvp.c
index 7fa793672a7a..838abcfca0fb 100644
--- a/drivers/fpga/altera-cvp.c
+++ b/drivers/fpga/altera-cvp.c
@@ -403,6 +403,7 @@ static int altera_cvp_probe(struct pci_dev *pdev,
struct altera_cvp_conf *conf;
struct fpga_manager *mgr;
u16 cmd, val;
+ u32 val32;
int ret;
/*
@@ -416,6 +417,14 @@ static int altera_cvp_probe(struct pci_dev *pdev,
return -ENODEV;
}
+ pci_read_config_dword(pdev, VSE_CVP_STATUS, &val32);
+ if (!(val32 & VSE_CVP_STATUS_CVP_EN)) {
+ dev_err(&pdev->dev,
+ "CVP is disabled for this device: CVP_STATUS Reg 0x%x\n",
+ val32);
+ return -ENODEV;
+ }
+
conf = devm_kzalloc(&pdev->dev, sizeof(*conf), GFP_KERNEL);
if (!conf)
return -ENOMEM;
--
With best regards,
Andreas Puhm <puhm@oregano.at>
next reply other threads:[~2018-10-19 15:59 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-19 15:53 Andreas Puhm [this message]
2018-10-22 10:33 ` Moritz Fischer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2c6313a3f7c04b70b8a06a50934fe27a@SRV177.busymouse24.de \
--to=puhm@oregano.at \
--cc=atull@kernel.org \
--cc=linux-fpga@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mdf@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®