Re: [PATCH] ACPI/PPTT: use ACPI ID whenever ACPI_PPTT_ACPI_PROCESSOR_ID_VALID is set

[Jeremy Linton <jeremy.linton@arm.com>]

Hi,

On 06/29/2018 11:17 AM, Sudeep Holla wrote:
> Currently we use the ACPI processor ID only for the leaf/processor nodes
> as the specification states it must match the value of ACPI processor ID
> field in the processor’s entry in the MADT.
> 
> However, if a PPTT structure represents processors group, it match a
> processor container UID in the namespace and ACPI_PPTT_ACPI_PROCESSOR_ID_VALID
> flag describe whether the ACPI processor ID is valid.
> 
> Lets use UID whenever ACPI_PPTT_ACPI_PROCESSOR_ID_VALID is set to be
> consistent instead of using table offset as it's currently done for non
> leaf nodes.
> 
> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
> ---
>   drivers/acpi/pptt.c | 10 ++++++++--
>   1 file changed, 8 insertions(+), 2 deletions(-)
> 
> Hi,
> 
> There's ongoing discussion on assigning ID based in OS using simple
> counters. It can never be consistent with firmware's view. So if the
> firmware provides valid UID for non-processors node, we must use it.
> 
> Regards,
> Sudeep
> 
> diff --git a/drivers/acpi/pptt.c b/drivers/acpi/pptt.c
> index e5ea1974d1e3..d1e26cb599bf 100644
> --- a/drivers/acpi/pptt.c
> +++ b/drivers/acpi/pptt.c
> @@ -481,8 +481,14 @@ static int topology_get_acpi_cpu_tag(struct acpi_table_header *table,
>   	if (cpu_node) {
>   		cpu_node = acpi_find_processor_package_id(table, cpu_node,
>   							  level, flag);
> -		/* Only the first level has a guaranteed id */
> -		if (level == 0)
> +		/*
> +		 * As per specification if the processor structure represents
> +		 * an actual processor, then ACPI processor ID must be valid.
> +		 * For processor containers ACPI_PPTT_ACPI_PROCESSOR_ID_VALID
> +		 * should be set if the UID is valid
> +		 */
> +		if (level == 0 ||
> +		    cpu_node->flags & ACPI_PPTT_ACPI_PROCESSOR_ID_VALID)
>   			return cpu_node->acpi_processor_id;
>   		return ACPI_PTR_DIFF(cpu_node, table);
>   	}
> 

Ok sure,

Acked-by: Jeremy Linton <jeremy.linton@arm.com>


PS: To table implementers, the spec today mandates that setting the 
valid flag on a non leaf node means there is a matching _UID processor 
container in DSDT/SSDT.