From mboxrd@z Thu Jan  1 00:00:00 1970
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
        id S1753531AbeAQOm0 (ORCPT <rfc822;ralf@linux-mips.org> + 1 other);
        Wed, 17 Jan 2018 09:42:26 -0500
Received: from mail-wr0-f196.google.com ([209.85.128.196]:35254 "EHLO
        mail-wr0-f196.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
        with ESMTP id S1753351AbeAQOlR (ORCPT
        <rfc822;linux-kernel@vger.kernel.org>);
        Wed, 17 Jan 2018 09:41:17 -0500
X-Google-Smtp-Source: ACJfBotcGn+I/yoC+RxHOU7dpEHO9UtBwmje1cg/R4pNbOyedjee2iM0XnzgrvT0wcmkq2uTYvEj3g==
From: Michal Simek <michal.simek@xilinx.com>
To: devicetree@vger.kernel.org
Cc: monstr@monstr.eu, Steffen Trumtrar <s.trumtrar@pengutronix.de>,
        linux-kernel@vger.kernel.org,
        Peter Crosthwaite <peter.crosthwaite@xilinx.com>,
        Rob Herring <robh+dt@kernel.org>,
        Rob Herring <robherring2@gmail.com>,
        Mark Rutland <mark.rutland@arm.com>,
        Josh Cartwright <josh.cartwright@ni.com>,
        Russell King <linux@armlinux.org.uk>,
        linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/5] arm: zynq: Add Xilinx cc108 board
Date: Wed, 17 Jan 2018 15:41:09 +0100
Message-Id: <2dd39101153bb1985180c856f17bd60ca79d620f.1516200065.git.michal.simek@xilinx.com>
X-Mailer: git-send-email 1.9.1
In-Reply-To: <cover.1516200065.git.michal.simek@xilinx.com>
References: <cover.1516200065.git.michal.simek@xilinx.com>
In-Reply-To: <cover.1516200065.git.michal.simek@xilinx.com>
References: <cover.1516200065.git.michal.simek@xilinx.com>
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org
Return-Path: <linux-kernel-owner@vger.kernel.org>

The board contains 7z010 with 512MB memory, ethernet, qspi, uart, usbs
and sd. But board is not supporting booting from sd card.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 arch/arm/boot/dts/Makefile       |  1 +
 arch/arm/boot/dts/zynq-cc108.dts | 75 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 76 insertions(+)
 create mode 100644 arch/arm/boot/dts/zynq-cc108.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d0381e9caf21..679cd258bc1f 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1036,6 +1036,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \
 	wm8750-apc8750.dtb \
 	wm8850-w70v2.dtb
 dtb-$(CONFIG_ARCH_ZYNQ) += \
+	zynq-cc108.dtb \
 	zynq-microzed.dtb \
 	zynq-parallella.dtb \
 	zynq-zc702.dtb \
diff --git a/arch/arm/boot/dts/zynq-cc108.dts b/arch/arm/boot/dts/zynq-cc108.dts
new file mode 100644
index 000000000000..1a0f631c1d8d
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-cc108.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx CC108 board DTS
+ *
+ * (C) Copyright 2007-2018 Xilinx, Inc.
+ * (C) Copyright 2007-2013 Michal Simek
+ * (C) Copyright 2007-2012 PetaLogix Qld Pty Ltd
+ *
+ * Michal SIMEK <monstr@monstr.eu>
+ */
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+	compatible = "xlnx,zynq-cc108", "xlnx,zynq-7000";
+	model = "Xilinx Zynq";
+
+	aliases {
+		ethernet0 = &gem0;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x20000000>;
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
+	usb_phy1: phy1 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@1 {
+		reg = <1>;
+		device_type = "ethernet-phy";
+	};
+};
+
+&sdhci1 {
+	status = "okay";
+	broken-cd ;
+	wp-inverted ;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy1>;
+};
-- 
1.9.1