From: Juergen Gross <jgross@suse.com>
To: "Sergio Miguéns Iglesias" <lonyelon@gmail.com>, konrad.wilk@oracle.com
Cc: boris.ostrovsky@oracle.com, sstabellini@kernel.org,
bhelgaas@google.com, xen-devel@lists.xenproject.org,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
"Sergio Miguéns Iglesias" <sergio@lony.xyz>
Subject: Re: [PATCH] xen/pcifront: Removed unnecessary __ref annotation
Date: Mon, 30 Aug 2021 06:55:24 +0200 [thread overview]
Message-ID: <2df006a3-d232-c356-3402-888739835967@suse.com> (raw)
In-Reply-To: <20210829221415.647744-1-sergio@lony.xyz>
[-- Attachment #1.1.1: Type: text/plain, Size: 4322 bytes --]
On 30.08.21 00:14, Sergio Miguéns Iglesias wrote:
> An unnecessary "__ref" annotation was removed from the
> "drivers/pci/xen_pcifront.c" file. The function where the annotation
> was used was "pcifront_backend_changed()", which does not call any
> functions annotated as "__*init" nor "__*exit". This makes "__ref"
> unnecessary since this annotation is used to make the compiler ignore
> section miss-matches when they are not happening here in the first
> place.
>
> In addition to the aforementioned change, some code style issues were
> fixed in the same file.
>
> Signed-off-by: Sergio Miguéns Iglesias <sergio@lony.xyz>
> ---
> drivers/pci/xen-pcifront.c | 24 ++++++++++++++----------
> 1 file changed, 14 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/pci/xen-pcifront.c b/drivers/pci/xen-pcifront.c
> index b7a8f3a1921f..f06661704f3a 100644
> --- a/drivers/pci/xen-pcifront.c
> +++ b/drivers/pci/xen-pcifront.c
> @@ -115,7 +115,7 @@ static int do_pci_op(struct pcifront_device *pdev, struct xen_pci_op *op)
> struct xen_pci_op *active_op = &pdev->sh_info->op;
> unsigned long irq_flags;
> evtchn_port_t port = pdev->evtchn;
> - unsigned irq = pdev->irq;
> + unsigned int irq = pdev->irq;
> s64 ns, ns_timeout;
>
> spin_lock_irqsave(&pdev->sh_info_lock, irq_flags);
> @@ -152,11 +152,10 @@ static int do_pci_op(struct pcifront_device *pdev, struct xen_pci_op *op)
> }
> }
>
> - /*
> - * We might lose backend service request since we
> - * reuse same evtchn with pci_conf backend response. So re-schedule
> - * aer pcifront service.
> - */
> + /* We might lose backend service request since we
This is no net or drivers/net file, so please keep the initial "/*"
line and fixup the other multi-line comments accordingly.
> + * reuse same evtchn with pci_conf backend response. So re-schedule
> + * aer pcifront service.
> + */
> if (test_bit(_XEN_PCIB_active,
> (unsigned long *)&pdev->sh_info->flags)) {
> dev_err(&pdev->xdev->dev,
> @@ -493,7 +492,8 @@ static int pcifront_scan_root(struct pcifront_device *pdev,
> list_add(&bus_entry->list, &pdev->root_buses);
>
> /* pci_scan_root_bus skips devices which do not have a
> - * devfn==0. The pcifront_scan_bus enumerates all devfn. */
> + * devfn==0. The pcifront_scan_bus enumerates all devfn.
> + */
> err = pcifront_scan_bus(pdev, domain, bus, b);
>
> /* Claim resources before going "live" with our devices */
> @@ -651,8 +651,9 @@ static void pcifront_do_aer(struct work_struct *data)
> pci_channel_state_t state =
> (pci_channel_state_t)pdev->sh_info->aer_op.err;
>
> - /*If a pci_conf op is in progress,
> - we have to wait until it is done before service aer op*/
> + /* If a pci_conf op is in progress, we have to wait until it is done
> + * before service aer op
> + */
> dev_dbg(&pdev->xdev->dev,
> "pcifront service aer bus %x devfn %x\n",
> pdev->sh_info->aer_op.bus, pdev->sh_info->aer_op.devfn);
> @@ -676,6 +677,7 @@ static void pcifront_do_aer(struct work_struct *data)
> static irqreturn_t pcifront_handler_aer(int irq, void *dev)
> {
> struct pcifront_device *pdev = dev;
> +
> schedule_pcifront_aer_op(pdev);
> return IRQ_HANDLED;
> }
> @@ -1027,6 +1029,7 @@ static int pcifront_detach_devices(struct pcifront_device *pdev)
> /* Find devices being detached and remove them. */
> for (i = 0; i < num_devs; i++) {
> int l, state;
> +
> l = snprintf(str, sizeof(str), "state-%d", i);
> if (unlikely(l >= (sizeof(str) - 1))) {
> err = -ENOMEM;
> @@ -1078,7 +1081,7 @@ static int pcifront_detach_devices(struct pcifront_device *pdev)
> return err;
> }
>
> -static void __ref pcifront_backend_changed(struct xenbus_device *xdev,
> +static void pcifront_backend_changed(struct xenbus_device *xdev,
> enum xenbus_state be_state)
> {
> struct pcifront_device *pdev = dev_get_drvdata(&xdev->dev);
> @@ -1137,6 +1140,7 @@ static int pcifront_xenbus_probe(struct xenbus_device *xdev,
> static int pcifront_xenbus_remove(struct xenbus_device *xdev)
> {
> struct pcifront_device *pdev = dev_get_drvdata(&xdev->dev);
> +
> if (pdev)
> free_pdev(pdev);
>
>
Juergen
[-- Attachment #1.1.2: OpenPGP public key --]
[-- Type: application/pgp-keys, Size: 3135 bytes --]
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 495 bytes --]
next prev parent reply other threads:[~2021-08-30 4:55 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-29 22:14 Sergio Miguéns Iglesias
2021-08-30 4:55 ` Juergen Gross [this message]
2021-08-30 17:50 ` Sergio Miguéns Iglesias
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2df006a3-d232-c356-3402-888739835967@suse.com \
--to=jgross@suse.com \
--cc=bhelgaas@google.com \
--cc=boris.ostrovsky@oracle.com \
--cc=konrad.wilk@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lonyelon@gmail.com \
--cc=sergio@lony.xyz \
--cc=sstabellini@kernel.org \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®