From: Roger Quadros <rogerq@ti.com>
To: Wen Yang <wen.yang99@zte.com.cn>, <linux-kernel@vger.kernel.org>
Cc: <xue.zhihong@zte.com.cn>, <wang.yi59@zte.com.cn>,
<cheng.shengyu@zte.com.cn>,
Kishon Vijay Abraham I <kishon@ti.com>
Subject: Re: [PATCH] phy: ti: am654-serdes: fix an use-after-free in serdes_am654_clk_register()
Date: Tue, 6 Aug 2019 17:07:42 +0300 [thread overview]
Message-ID: <2eec3583-4f89-189c-4a08-57b5acc2272b@ti.com> (raw)
In-Reply-To: <1562566745-7447-4-git-send-email-wen.yang99@zte.com.cn>
On 08/07/2019 09:19, Wen Yang wrote:
> The regmap_node variable is still being used in the syscon_node_to_regmap()
> call after the of_node_put() call, which may result in use-after-free.
>
> Fixes: 71e2f5c5c224 ("phy: ti: Add a new SERDES driver for TI's AM654x SoC")
> Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
> Cc: Kishon Vijay Abraham I <kishon@ti.com>
> Cc: Roger Quadros <rogerq@ti.com>
> Cc: linux-kernel@vger.kernel.org
Reviewed-by: Roger Quadros <rogerq@ti.com>
> ---
> drivers/phy/ti/phy-am654-serdes.c | 33 ++++++++++++++++++++++-----------
> 1 file changed, 22 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/phy/ti/phy-am654-serdes.c b/drivers/phy/ti/phy-am654-serdes.c
> index f8edd08..f14f1f0 100644
> --- a/drivers/phy/ti/phy-am654-serdes.c
> +++ b/drivers/phy/ti/phy-am654-serdes.c
> @@ -405,6 +405,7 @@ static int serdes_am654_clk_register(struct serdes_am654 *am654_phy,
> const __be32 *addr;
> unsigned int reg;
> struct clk *clk;
> + int ret = 0;
>
> mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
> if (!mux)
> @@ -413,34 +414,40 @@ static int serdes_am654_clk_register(struct serdes_am654 *am654_phy,
> init = &mux->clk_data;
>
> regmap_node = of_parse_phandle(node, "ti,serdes-clk", 0);
> - of_node_put(regmap_node);
> if (!regmap_node) {
> dev_err(dev, "Fail to get serdes-clk node\n");
> - return -ENODEV;
> + ret = -ENODEV;
> + goto out_put_node;
> }
>
> regmap = syscon_node_to_regmap(regmap_node->parent);
> if (IS_ERR(regmap)) {
> dev_err(dev, "Fail to get Syscon regmap\n");
> - return PTR_ERR(regmap);
> + ret = PTR_ERR(regmap);
> + goto out_put_node;
> }
>
> num_parents = of_clk_get_parent_count(node);
> if (num_parents < 2) {
> dev_err(dev, "SERDES clock must have parents\n");
> - return -EINVAL;
> + ret = -EINVAL;
> + goto out_put_node;
> }
>
> parent_names = devm_kzalloc(dev, (sizeof(char *) * num_parents),
> GFP_KERNEL);
> - if (!parent_names)
> - return -ENOMEM;
> + if (!parent_names) {
> + ret = -ENOMEM;
> + goto out_put_node;
> + }
>
> of_clk_parent_fill(node, parent_names, num_parents);
>
> addr = of_get_address(regmap_node, 0, NULL, NULL);
> - if (!addr)
> - return -EINVAL;
> + if (!addr) {
> + ret = -EINVAL;
> + goto out_put_node;
> + }
>
> reg = be32_to_cpu(*addr);
>
> @@ -456,12 +463,16 @@ static int serdes_am654_clk_register(struct serdes_am654 *am654_phy,
> mux->hw.init = init;
>
> clk = devm_clk_register(dev, &mux->hw);
> - if (IS_ERR(clk))
> - return PTR_ERR(clk);
> + if (IS_ERR(clk)) {
> + ret = PTR_ERR(clk);
> + goto out_put_node;
> + }
>
> am654_phy->clks[clock_num] = clk;
>
> - return 0;
> +out_put_node:
> + of_node_put(regmap_node);
> + return ret;
> }
>
> static const struct of_device_id serdes_am654_id_table[] = {
>
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
next prev parent reply other threads:[~2019-08-06 14:07 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-08 6:19 [PATCH] cpufreq/pasemi: fix an use-after-free in pas_cpufreq_cpu_init() Wen Yang
2019-07-08 6:19 ` [PATCH] crypto: crypto4xx: fix a potential double free in ppc4xx_trng_probe Wen Yang
2019-07-08 6:27 ` Julia Lawall
2019-07-09 12:14 ` Coccinelle: Checking the deletion of duplicate of_node_put() calls with SmPL Markus Elfring
2019-07-10 5:55 ` Markus Elfring
2019-07-12 10:17 ` [PATCH] crypto: crypto4xx: fix a potential double free in ppc4xx_trng_probe Herbert Xu
2019-07-08 6:19 ` [PATCH] irqchip: renesas-rza1: fix an use-after-free in rza1_irqc_probe() Wen Yang
2019-07-08 7:36 ` Geert Uytterhoeven
2019-07-09 12:58 ` [tip:irq/urgent] irqchip/renesas-rza1: Prevent " tip-bot for Wen Yang
2019-07-26 13:41 ` [PATCH] irqchip: renesas-rza1: fix an " Marc Zyngier
2019-07-08 6:19 ` [PATCH] phy: ti: am654-serdes: fix an use-after-free in serdes_am654_clk_register() Wen Yang
2019-08-06 14:07 ` Roger Quadros [this message]
2019-07-08 6:27 ` [PATCH] cpufreq/pasemi: fix an use-after-free in pas_cpufreq_cpu_init() Viresh Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2eec3583-4f89-189c-4a08-57b5acc2272b@ti.com \
--to=rogerq@ti.com \
--cc=cheng.shengyu@zte.com.cn \
--cc=kishon@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=wang.yi59@zte.com.cn \
--cc=wen.yang99@zte.com.cn \
--cc=xue.zhihong@zte.com.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®