From: Paolo Bonzini <pbonzini@redhat.com>
To: Sean Christopherson <seanjc@google.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>,
Wanpeng Li <wanpengli@tencent.com>,
Jim Mattson <jmattson@google.com>, Joerg Roedel <joro@8bytes.org>,
kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
Eric Li <ercli@ucdavis.edu>, David Matlack <dmatlack@google.com>,
Oliver Upton <oupton@google.com>
Subject: Re: [PATCH v5 06/15] KVM: nVMX: Keep KVM updates to BNDCFGS ctrl bits across MSR write
Date: Fri, 22 Jul 2022 11:06:13 +0200 [thread overview]
Message-ID: <2f5c2242-0c73-9770-9e17-9c87c27c2f05@redhat.com> (raw)
In-Reply-To: <20220607213604.3346000-7-seanjc@google.com>
On 6/7/22 23:35, Sean Christopherson wrote:
> From: Oliver Upton <oupton@google.com>
>
> Since commit 5f76f6f5ff96 ("KVM: nVMX: Do not expose MPX VMX controls
> when guest MPX disabled"), KVM has taken ownership of the "load
> IA32_BNDCFGS" and "clear IA32_BNDCFGS" VMX entry/exit controls. The ABI
> is that these bits must be set in the IA32_VMX_TRUE_{ENTRY,EXIT}_CTLS
> MSRs if the guest's CPUID supports MPX, and clear otherwise.
>
> However, commit aedbaf4f6afd ("KVM: x86: Extract
> kvm_update_cpuid_runtime() from kvm_update_cpuid()") partially broke KVM
> ownership of the aforementioned bits. Before, kvm_update_cpuid() was
> exercised frequently when running a guest and constantly applied its own
> changes to the BNDCFGS bits. Now, the BNDCFGS bits are only ever
> updated after a KVM_SET_CPUID/KVM_SET_CPUID2 ioctl, meaning that a
> subsequent MSR write from userspace will clobber these values.
>
> Uphold the old ABI by reapplying KVM's tweaks to the BNDCFGS bits after
> an MSR write from userspace.
>
> Note, the old ABI that is being preserved is a KVM hack to workaround a
> userspace bug; see commit 5f76f6f5ff96 ("KVM: nVMX: Do not expose MPX VMX
> controls when guest MPX disabled").
Actually this is not a userspace bug. It's an L1 workaround for running
*correct* L1 userspace without a *kernel* bugfix on L0, namely commit
691bd4340bef ("kvm: vmx: allow host to access guest MSR_IA32_BNDCFGS").
But thanks for writing the incorrect commit message, because now that
I've actually looked at the history, I'm going to say screw 6 year old
kernels used as L0. Let's just revert commit 5f76f6f5ff96.
I've applied patches 1-5, let's see how bad the conflicts are in the
rest of the series.
(This shows another reason why sometimes series seem to be cursed and
don't get reviews: maintainers having a fuzzy feeling that *something*
is wrong with them and putting off the review until it finally clicks).
Paolo
next prev parent reply other threads:[~2022-07-22 9:06 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-07 21:35 [PATCH v5 00/15] KVM: nVMX: VMX MSR quirk+fixes, CR4 fixes Sean Christopherson
2022-06-07 21:35 ` [PATCH v5 01/15] KVM: x86: Split kvm_is_valid_cr4() and export only the non-vendor bits Sean Christopherson
2022-06-07 21:35 ` [PATCH v5 02/15] KVM: nVMX: Account for KVM reserved CR4 bits in consistency checks Sean Christopherson
2022-06-07 21:35 ` [PATCH v5 03/15] KVM: nVMX: Inject #UD if VMXON is attempted with incompatible CR0/CR4 Sean Christopherson
2022-06-07 21:35 ` [PATCH v5 04/15] KVM: nVMX: Rename handle_vm{on,off}() to handle_vmx{on,off}() Sean Christopherson
2022-06-07 21:35 ` [PATCH v5 05/15] KVM: nVMX: Let userspace set nVMX MSR to any _host_ supported value Sean Christopherson
2022-10-31 16:39 ` Yu Zhang
2022-10-31 17:11 ` Sean Christopherson
2022-11-01 10:18 ` Yu Zhang
2022-11-01 17:58 ` Sean Christopherson
2022-11-02 8:54 ` Yu Zhang
2022-11-03 16:53 ` Sean Christopherson
2022-11-07 8:28 ` Yu Zhang
2022-11-07 15:06 ` Sean Christopherson
2022-11-08 10:21 ` Yu Zhang
2022-11-08 18:35 ` Sean Christopherson
2022-11-10 8:44 ` Yu Zhang
2022-11-10 16:08 ` Sean Christopherson
2022-06-07 21:35 ` [PATCH v5 06/15] KVM: nVMX: Keep KVM updates to BNDCFGS ctrl bits across MSR write Sean Christopherson
2022-07-22 9:06 ` Paolo Bonzini [this message]
2022-06-07 21:35 ` [PATCH v5 07/15] KVM: VMX: Add helper to check if the guest PMU has PERF_GLOBAL_CTRL Sean Christopherson
2022-06-07 21:35 ` [PATCH v5 08/15] KVM: nVMX: Keep KVM updates to PERF_GLOBAL_CTRL ctrl bits across MSR write Sean Christopherson
2022-06-07 21:35 ` [PATCH v5 09/15] KVM: nVMX: Drop nested_vmx_pmu_refresh() Sean Christopherson
2022-06-07 21:35 ` [PATCH v5 10/15] KVM: nVMX: Add a quirk for KVM tweaks to VMX MSRs Sean Christopherson
2022-06-07 21:36 ` [PATCH v5 11/15] KVM: nVMX: Set UMIP bit CR4_FIXED1 MSR when emulating UMIP Sean Christopherson
2022-07-22 9:49 ` Paolo Bonzini
2022-06-07 21:36 ` [PATCH v5 12/15] KVM: nVMX: Extend VMX MSRs quirk to CR0/4 fixed1 bits Sean Christopherson
2022-07-22 9:50 ` Paolo Bonzini
2022-06-07 21:36 ` [PATCH v5 13/15] KVM: selftests: Add test to verify KVM's VMX MSRs quirk for controls Sean Christopherson
2022-06-07 21:36 ` [PATCH v5 14/15] KVM: selftests: Extend VMX MSRs test to cover CR4_FIXED1 (and its quirks) Sean Christopherson
2022-06-07 21:36 ` [PATCH v5 15/15] KVM: selftests: Verify VMX MSRs can be restored to KVM-supported values Sean Christopherson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2f5c2242-0c73-9770-9e17-9c87c27c2f05@redhat.com \
--to=pbonzini@redhat.com \
--cc=dmatlack@google.com \
--cc=ercli@ucdavis.edu \
--cc=jmattson@google.com \
--cc=joro@8bytes.org \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=oupton@google.com \
--cc=seanjc@google.com \
--cc=vkuznets@redhat.com \
--cc=wanpengli@tencent.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®