Re: [PATCH v14 02/11] dt-bindings: soc: Add MT8183 power dt-bindings

[Enric Balletbo i Serra <enric.balletbo@collabora.com>]

Hi Weiyi,

Thank you for your patch. You should cc devicetree@vger.kernel.org, otherwise
this patch might be ignored.

On 6/5/20 10:15, Weiyi Lu wrote:
> Add power dt-bindings of MT8183 and introduces "BASIC" and
> "SUBSYS" clock types in binding document.
> The "BASIC" type is compatible to the original power control with
> clock name [a-z]+[0-9]*, e.g. mm, vpu1.
> The "SUBSYS" type is used for bus protection control with clock
> name [a-z]+-[0-9]+, e.g. isp-0, cam-1.
> And add an optional smi-comm property for phandle to smi-common
> controller.
> 
> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
> ---
>  .../devicetree/bindings/soc/mediatek/scpsys.txt    | 21 ++++++++++++++---
>  include/dt-bindings/power/mt8183-power.h           | 26 ++++++++++++++++++++++
>  2 files changed, 44 insertions(+), 3 deletions(-)
>  create mode 100644 include/dt-bindings/power/mt8183-power.h
> 
> diff --git a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
> index 2bc3677..5424e66 100644
> --- a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
> +++ b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
> @@ -15,6 +15,7 @@ power/power-domain.yaml. It provides the power domains defined in
>  - include/dt-bindings/power/mt2701-power.h
>  - include/dt-bindings/power/mt2712-power.h
>  - include/dt-bindings/power/mt7622-power.h
> +- include/dt-bindings/power/mt8183-power.h
>  
>  Required properties:
>  - compatible: Should be one of:
> @@ -27,12 +28,16 @@ Required properties:
>  	- "mediatek,mt7623a-scpsys": For MT7623A SoC
>  	- "mediatek,mt7629-scpsys", "mediatek,mt7622-scpsys": For MT7629 SoC
>  	- "mediatek,mt8173-scpsys"
> +	- "mediatek,mt8183-scpsys"
>  - #power-domain-cells: Must be 1
>  - reg: Address range of the SCPSYS unit
>  - infracfg: must contain a phandle to the infracfg controller
> -- clock, clock-names: clocks according to the common clock binding.
> -                      These are clocks which hardware needs to be
> -                      enabled before enabling certain power domains.
> +- clock, clock-names: Clocks according to the common clock binding.
> +                      Some SoCs have to groups of clocks.
> +                      BASIC clocks need to be enabled before enabling the
> +                      corresponding power domain.
> +                      SUBSYS clocks need to be enabled before releasing the
> +                      bus protection.
>  	Required clocks for MT2701 or MT7623: "mm", "mfg", "ethif"
>  	Required clocks for MT2712: "mm", "mfg", "venc", "jpgdec", "audio", "vdec"
>  	Required clocks for MT6765: MUX: "mm", "mfg"
> @@ -43,6 +48,15 @@ Required properties:
>  	Required clocks for MT7622 or MT7629: "hif_sel"
>  	Required clocks for MT7623A: "ethif"
>  	Required clocks for MT8173: "mm", "mfg", "venc", "venc_lt"
> +	Required clocks for MT8183: BASIC: "audio", "mfg", "mm", "cam", "isp",
> +					   "vpu", "vpu1", "vpu2", "vpu3"
> +				    SUBSYS: "mm-0", "mm-1", "mm-2", "mm-3",
> +					    "mm-4", "mm-5", "mm-6", "mm-7",
> +					    "mm-8", "mm-9", "isp-0", "isp-1",
> +					    "cam-0", "cam-1", "cam-2", "cam-3",
> +					    "cam-4", "cam-5", "cam-6", "vpu-0",
> +					    "vpu-1", "vpu-2", "vpu-3", "vpu-4",
> +					    "vpu-5"
>  
>  Optional properties:
>  - vdec-supply: Power supply for the vdec power domain
> @@ -55,6 +69,7 @@ Optional properties:
>  - mfg_async-supply: Power supply for the mfg_async power domain
>  - mfg_2d-supply: Power supply for the mfg_2d power domain
>  - mfg-supply: Power supply for the mfg power domain
> +- smi_comm: a phandle to the smi-common controller


I think that in device-tree hyphen are preferred and kind of a must for new
properties, also I think you should prefix this property with "mediatek,". Can I
suggest you to use "mediatek,smi" like is done in the mediatek,smi-larb binding?
AFAICS is the same phandle right?

Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt:
- mediatek,smi : a phandle to the smi_common node.


>  
>  Example:
>  
> diff --git a/include/dt-bindings/power/mt8183-power.h b/include/dt-bindings/power/mt8183-power.h
> new file mode 100644
> index 0000000..d6b25f8
> --- /dev/null
> +++ b/include/dt-bindings/power/mt8183-power.h
> @@ -0,0 +1,26 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2018 MediaTek Inc.

You probably want to update the copyright to 2020.

> + * Author: Weiyi Lu <weiyi.lu@mediatek.com>
> + */
> +
> +#ifndef _DT_BINDINGS_POWER_MT8183_POWER_H
> +#define _DT_BINDINGS_POWER_MT8183_POWER_H
> +
> +#define MT8183_POWER_DOMAIN_AUDIO	0
> +#define MT8183_POWER_DOMAIN_CONN	1
> +#define MT8183_POWER_DOMAIN_MFG_ASYNC	2
> +#define MT8183_POWER_DOMAIN_MFG		3
> +#define MT8183_POWER_DOMAIN_MFG_CORE0	4
> +#define MT8183_POWER_DOMAIN_MFG_CORE1	5
> +#define MT8183_POWER_DOMAIN_MFG_2D	6
> +#define MT8183_POWER_DOMAIN_DISP	7
> +#define MT8183_POWER_DOMAIN_CAM		8
> +#define MT8183_POWER_DOMAIN_ISP		9
> +#define MT8183_POWER_DOMAIN_VDEC	10
> +#define MT8183_POWER_DOMAIN_VENC	11
> +#define MT8183_POWER_DOMAIN_VPU_TOP	12
> +#define MT8183_POWER_DOMAIN_VPU_CORE0	13
> +#define MT8183_POWER_DOMAIN_VPU_CORE1	14
> +
> +#endif /* _DT_BINDINGS_POWER_MT8183_POWER_H */
>