mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Steev Klimaszewski <steev@kali.org>
To: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>,
	linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] arm64: dts: qcom: c630: Add backlight controller
Date: Tue, 8 Feb 2022 06:35:08 -0600	[thread overview]
Message-ID: <300f9ec9-da52-235f-ea3c-b49bdc8bfb75@kali.org> (raw)
In-Reply-To: <20220208041606.144039-1-bjorn.andersson@linaro.org>


On 2/7/22 10:16 PM, Bjorn Andersson wrote:
> The Lenovo Yoga C630 uses the PWM controller in the TI SN65DSI86 bridge
> chip to provide a signal for the backlight control and has TLMM GPIO 11
> attached to some regulator that drives the backlight.
>
> Unfortunately the regulator attached to this gpio is also powering the
> camera, so turning off backlight result in the detachment of the camera
> as well.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
>   arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 8 ++++++++
>   1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
> index 58845a14805f..55fb7302245b 100644
> --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
> @@ -59,6 +59,7 @@ mode {
>   	panel {
>   		compatible = "boe,nv133fhm-n61";
>   		no-hpd;
> +		backlight = <&backlight>;
>   
>   		ports {
>   			port {
> @@ -98,6 +99,12 @@ sn65dsi86_refclk: sn65dsi86-refclk {
>   
>   		clock-frequency = <19200000>;
>   	};
> +
> +	backlight: backlight {
> +		compatible = "pwm-backlight";
> +		pwms = <&sn65dsi86 1000000>;
> +		enable-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
> +	};
>   };
>   
>   &adsp_pas {
> @@ -419,6 +426,7 @@ sn65dsi86: bridge@2c {
>   		clock-names = "refclk";
>   
>   		no-hpd;
> +		#pwm-cells = <1>;
>   
>   		ports {
>   			#address-cells = <1>;
Tested-by: Steev Klimaszewski <steev@kali.org>

      parent reply	other threads:[~2022-02-08 13:17 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-08  4:16 Bjorn Andersson
2022-02-08  4:16 ` [PATCH 2/2] arm64: dts: qcom: c630: Move panel to aux-bus Bjorn Andersson
2022-02-08 12:35   ` Steev Klimaszewski
2022-02-08 12:35 ` Steev Klimaszewski [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=300f9ec9-da52-235f-ea3c-b49bdc8bfb75@kali.org \
    --to=steev@kali.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®