From: "Jiaxun Yang" <jiaxun.yang@flygoat.com>
To: "Gregory CLEMENT" <gregory.clement@bootlin.com>,
"Thomas Bogendoerfer" <tsbogend@alpha.franken.de>,
"paulburton@kernel.org" <paulburton@kernel.org>
Cc: "linux-mips@vger.kernel.org" <linux-mips@vger.kernel.org>,
linux-kernel@vger.kernel.org,
"Théo Lebrun" <theo.lebrun@bootlin.com>,
"Vladimir Kondratiev" <vladimir.kondratiev@mobileye.com>,
"Tawfik Bayouk" <tawfik.bayouk@mobileye.com>,
"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>
Subject: Re: [PATCH] MIPS: SMP-CPS: Fix address for GCR_ACCESS register for I6500
Date: Sat, 20 Jul 2024 11:13:12 +0800 [thread overview]
Message-ID: <302ca8fb-0185-4872-9d82-d472854e5a43@app.fastmail.com> (raw)
In-Reply-To: <20240719-smp_i6500-v1-1-8738e67d4802@bootlin.com>
在2024年7月19日七月 下午10:14,Gregory CLEMENT写道:
> Unlike most other MIPS CPUs, the I6500 CPUs have different address
> offsets for the Global CSR Access Privilege register. In the "MIPS64
> I6500 Multiprocessing System Programmer's Guide," it is stated that
> "the Global CSR Access Privilege register is located at offset 0x0120"
> in section 5.4.
>
> However, this is not the case for other MIPS64 CPUs such as the
> P6600. In the "MIPS64® P6600 Multiprocessing System Software User's
> Guide," section 6.4.2.6 states that the GCR_ACCESS register has an
> offset of 0x0020.
Hi Gregory,
I confirmed this is a CM3 feature rather than CPU core (Samruai) feature.
Please use CM version to select register region.
(And perhaps Cc stable for this patch?)
Thanks
- Jiaxun
>
> This fix allows to use the VP cores in SMP mode.
>
> Based on the work of Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
>
> Fixes: 859aeb1b0dd1 ("MIPS: Probe the I6500 CPU")
> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
> ---
> arch/mips/include/asm/mips-cm.h | 4 ++++
> arch/mips/kernel/smp-cps.c | 5 ++++-
> 2 files changed, 8 insertions(+), 1 deletion(-)
>
> diff --git a/arch/mips/include/asm/mips-cm.h b/arch/mips/include/asm/mips-cm.h
> index 3d9efc802e36..41bf9b3a98fb 100644
> --- a/arch/mips/include/asm/mips-cm.h
> +++ b/arch/mips/include/asm/mips-cm.h
> @@ -240,6 +240,10 @@ GCR_ACCESSOR_RO(32, 0x0d0, gic_status)
> GCR_ACCESSOR_RO(32, 0x0f0, cpc_status)
> #define CM_GCR_CPC_STATUS_EX BIT(0)
>
> +/* GCR_ACCESS - Controls core/IOCU access to GCRs */
> +GCR_ACCESSOR_RW(32, 0x120, access_i6500)
> +#define CM_GCR_ACCESS_ACCESSEN GENMASK(7, 0)
> +
> /* GCR_L2_CONFIG - Indicates L2 cache configuration when Config5.L2C=1
> */
> GCR_ACCESSOR_RW(32, 0x130, l2_config)
> #define CM_GCR_L2_CONFIG_BYPASS BIT(20)
> diff --git a/arch/mips/kernel/smp-cps.c b/arch/mips/kernel/smp-cps.c
> index e074138ffd7f..60590890b6da 100644
> --- a/arch/mips/kernel/smp-cps.c
> +++ b/arch/mips/kernel/smp-cps.c
> @@ -325,7 +325,10 @@ static void boot_core(unsigned int core, unsigned
> int vpe_id)
> write_gcr_co_reset_ext_base(CM_GCR_Cx_RESET_EXT_BASE_UEB);
>
> /* Ensure the core can access the GCRs */
> - set_gcr_access(1 << core);
> + if (current_cpu_type() != CPU_I6500)
> + set_gcr_access(1 << core);
> + else
> + set_gcr_access_i6500(1 << core);
>
> if (mips_cpc_present()) {
> /* Reset the core */
>
> ---
> base-commit: 9298d51eb3af24f88b211087eb698399f9efa439
> change-id: 20240719-smp_i6500-8cb233878c41
>
> Best regards,
> --
> Gregory CLEMENT <gregory.clement@bootlin.com>
--
- Jiaxun
next prev parent reply other threads:[~2024-07-20 3:13 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-19 14:14 Gregory CLEMENT
2024-07-20 3:13 ` Jiaxun Yang [this message]
2024-07-20 3:27 ` Jiaxun Yang
2024-07-22 9:58 ` Gregory CLEMENT
2024-07-22 10:17 ` Gregory CLEMENT
2024-07-22 10:36 ` Jiaxun Yang
2024-07-22 12:29 ` Gregory CLEMENT
2024-07-22 13:20 ` Gregory CLEMENT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=302ca8fb-0185-4872-9d82-d472854e5a43@app.fastmail.com \
--to=jiaxun.yang@flygoat.com \
--cc=gregory.clement@bootlin.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=paulburton@kernel.org \
--cc=tawfik.bayouk@mobileye.com \
--cc=theo.lebrun@bootlin.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=tsbogend@alpha.franken.de \
--cc=vladimir.kondratiev@mobileye.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®