From: Timothy Pearson <tpearson@raptorengineering.com>
To: linuxppc-dev <linuxppc-dev@lists.ozlabs.org>
Cc: linux-kernel <linux-kernel@vger.kernel.org>,
linux-pci <linux-pci@vger.kernel.org>,
Timothy Pearson <tpearson@raptorengineering.com>,
Madhavan Srinivasan <maddy@linux.ibm.com>,
Michael Ellerman <mpe@ellerman.id.au>,
christophe leroy <christophe.leroy@csgroup.eu>,
Naveen N Rao <naveen@kernel.org>,
Bjorn Helgaas <bhelgaas@google.com>,
Shawn Anastasio <sanastasio@raptorengineering.com>
Subject: [PATCH 2/8] pci/hotplug/pnv_php: Work around switches with broken
Date: Tue, 17 Jun 2025 23:22:21 -0500 (CDT) [thread overview]
Message-ID: <303034157.1309767.1750220541428.JavaMail.zimbra@raptorengineeringinc.com> (raw)
presence detection
The Microsemi Switchtec PM8533 PFX 48xG3 [11f8:8533] PCIe switch system
was observed to incorrectly assert the Presence Detect Set bit in its
capabilities when tested on a Raptor Computing Systems Blackbird system,
resulting in the hot insert path never attempting a rescan of the bus
and any downstream devices not being re-detected.
Work around this by additionally checking whether the PCIe data link is
active or not when performing presence detection on downstream switches'
ports, similar to the pciehp_hpc.c driver.
Signed-off-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
---
drivers/pci/hotplug/pnv_php.c | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/drivers/pci/hotplug/pnv_php.c b/drivers/pci/hotplug/pnv_php.c
index 2c07544216fb..1a734adb5b10 100644
--- a/drivers/pci/hotplug/pnv_php.c
+++ b/drivers/pci/hotplug/pnv_php.c
@@ -390,6 +390,20 @@ static int pnv_php_get_power_state(struct hotplug_slot *slot, u8 *state)
return 0;
}
+static int pcie_check_link_active(struct pci_dev *pdev)
+{
+ u16 lnk_status;
+ int ret;
+
+ ret = pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status);
+ if (ret == PCIBIOS_DEVICE_NOT_FOUND || PCI_POSSIBLE_ERROR(lnk_status))
+ return -ENODEV;
+
+ ret = !!(lnk_status & PCI_EXP_LNKSTA_DLLLA);
+
+ return ret;
+}
+
static int pnv_php_get_adapter_state(struct hotplug_slot *slot, u8 *state)
{
struct pnv_php_slot *php_slot = to_pnv_php_slot(slot);
@@ -402,6 +416,19 @@ static int pnv_php_get_adapter_state(struct hotplug_slot *slot, u8 *state)
*/
ret = pnv_pci_get_presence_state(php_slot->id, &presence);
if (ret >= 0) {
+ if (pci_pcie_type(php_slot->pdev) == PCI_EXP_TYPE_DOWNSTREAM &&
+ presence == OPAL_PCI_SLOT_EMPTY) {
+ /*
+ * Similar to pciehp_hpc, check whether the Link Active
+ * bit is set to account for broken downstream bridges
+ * that don't properly assert Presence Detect State, as
+ * was observed on the Microsemi Switchtec PM8533 PFX
+ * [11f8:8533].
+ */
+ if (pcie_check_link_active(php_slot->pdev) > 0)
+ presence = OPAL_PCI_SLOT_PRESENT;
+ }
+
*state = presence;
ret = 0;
} else {
--
2.39.5
reply other threads:[~2025-06-18 4:22 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=303034157.1309767.1750220541428.JavaMail.zimbra@raptorengineeringinc.com \
--to=tpearson@raptorengineering.com \
--cc=bhelgaas@google.com \
--cc=christophe.leroy@csgroup.eu \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=maddy@linux.ibm.com \
--cc=mpe@ellerman.id.au \
--cc=naveen@kernel.org \
--cc=sanastasio@raptorengineering.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®