From: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
To: Jacopo Mondi <jacopo+renesas@jmondi.org>,
<architt@codeaurora.org>, <a.hajda@samsung.com>,
<Laurent.pinchart@ideasonboard.com>, <airlied@linux.ie>,
<horms@verge.net.au>, <magnus.damm@gmail.com>,
<geert@linux-m68k.org>, <niklas.soderlund@ragnatech.se>,
<sergei.shtylyov@cogentembedded.com>, <robh+dt@kernel.org>,
<mark.rutland@arm.com>
Cc: <dri-devel@lists.freedesktop.org>,
<linux-renesas-soc@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v6 2/3] drm: bridge: Add thc63lvd1024 LVDS decoder driver
Date: Tue, 27 Mar 2018 09:24:28 +0300 [thread overview]
Message-ID: <30381869-9bc8-b6aa-a37a-598d9c8f280d@mentor.com> (raw)
In-Reply-To: <1521213399-31947-3-git-send-email-jacopo+renesas@jmondi.org>
Hi Jacopo,
On 03/16/2018 05:16 PM, Jacopo Mondi wrote:
> Add DRM bridge driver for Thine THC63LVD1024 LVDS to digital parallel
> output converter.
>
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> ---
> drivers/gpu/drm/bridge/Kconfig | 6 +
> drivers/gpu/drm/bridge/Makefile | 1 +
> drivers/gpu/drm/bridge/thc63lvd1024.c | 255 ++++++++++++++++++++++++++++++++++
> 3 files changed, 262 insertions(+)
> create mode 100644 drivers/gpu/drm/bridge/thc63lvd1024.c
>
> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
> index 3b99d5a..5815a20 100644
> --- a/drivers/gpu/drm/bridge/Kconfig
> +++ b/drivers/gpu/drm/bridge/Kconfig
> @@ -92,6 +92,12 @@ config DRM_SII9234
> It is an I2C driver, that detects connection of MHL bridge
> and starts encapsulation of HDMI signal.
>
> +config DRM_THINE_THC63LVD1024
> + tristate "Thine THC63LVD1024 LVDS decoder bridge"
> + depends on OF
> + ---help---
> + Thine THC63LVD1024 LVDS/parallel converter driver.
> +
> config DRM_TOSHIBA_TC358767
> tristate "Toshiba TC358767 eDP bridge"
> depends on OF
> diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
> index 373eb28..fd90b16 100644
> --- a/drivers/gpu/drm/bridge/Makefile
> +++ b/drivers/gpu/drm/bridge/Makefile
> @@ -8,6 +8,7 @@ obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
> obj-$(CONFIG_DRM_SIL_SII8620) += sil-sii8620.o
> obj-$(CONFIG_DRM_SII902X) += sii902x.o
> obj-$(CONFIG_DRM_SII9234) += sii9234.o
> +obj-$(CONFIG_DRM_THINE_THC63LVD1024) += thc63lvd1024.o
> obj-$(CONFIG_DRM_TOSHIBA_TC358767) += tc358767.o
> obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix/
> obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511/
> diff --git a/drivers/gpu/drm/bridge/thc63lvd1024.c b/drivers/gpu/drm/bridge/thc63lvd1024.c
> new file mode 100644
> index 0000000..02a54c2
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/thc63lvd1024.c
> @@ -0,0 +1,255 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * THC63LVD1024 LVDS to parallel data DRM bridge driver.
> + *
> + * Copyright (C) 2018 Jacopo Mondi <jacopo+renesas@jmondi.org>
> + */
> +
> +#include <drm/drmP.h>
> +#include <drm/drm_bridge.h>
> +#include <drm/drm_panel.h>
> +
> +#include <linux/gpio/consumer.h>
> +#include <linux/of_graph.h>
> +#include <linux/regulator/consumer.h>
> +
> +enum {
> + THC63_LVDS_IN0,
> + THC63_LVDS_IN1,
> + THC63_DIGITAL_OUT0,
> + THC63_DIGITAL_OUT1,
> +};
> +
> +static const char * const thc63_reg_names[] = {
> + "vcc", "lvcc", "pvcc", "cvcc",
> +};
> +
> +struct thc63_dev {
> + struct device *dev;
> +
> + struct regulator *vccs[ARRAY_SIZE(thc63_reg_names)];
> +
> + struct gpio_desc *pdwn;
> + struct gpio_desc *oe;
> +
> + struct drm_bridge bridge;
> + struct drm_bridge *next;
> +};
> +
> +static inline struct thc63_dev *to_thc63(struct drm_bridge *bridge)
> +{
> + return container_of(bridge, struct thc63_dev, bridge);
> +}
> +
> +static int thc63_attach(struct drm_bridge *bridge)
> +{
> + struct thc63_dev *thc63 = to_thc63(bridge);
> +
> + return drm_bridge_attach(bridge->encoder, thc63->next, bridge);
> +}
> +
> +static void thc63_enable(struct drm_bridge *bridge)
> +{
> + struct thc63_dev *thc63 = to_thc63(bridge);
> + struct regulator *vcc;
> + int i;
unsigned int i;
> +
> + for (i = 0; i < ARRAY_SIZE(thc63->vccs); i++) {
> + vcc = thc63->vccs[i];
> + if (!vcc)
> + continue;
> +
> + if (regulator_enable(vcc))
> + goto error_vcc_enable;
> + }
> +
> + if (thc63->pdwn)
> + gpiod_set_value(thc63->pdwn, 0);
> +
> + if (thc63->oe)
> + gpiod_set_value(thc63->oe, 1);
> +
> + return;
> +
> +error_vcc_enable:
> + dev_err(thc63->dev, "Failed to enable regulator %s\n",
> + thc63_reg_names[i]);
> +
> + for (i = i - 1; i >= 0; i--) {
> + vcc = thc63->vccs[i];
> + if (!vcc)
> + continue;
> +
> + regulator_disable(vcc);
> + }
> +}
> +
> +static void thc63_disable(struct drm_bridge *bridge)
> +{
> + struct thc63_dev *thc63 = to_thc63(bridge);
> + struct regulator *vcc;
> + int i;
> +
> + if (thc63->oe)
> + gpiod_set_value(thc63->oe, 0);
> +
> + if (thc63->pdwn)
> + gpiod_set_value(thc63->pdwn, 1);
> +
> + for (i = ARRAY_SIZE(thc63->vccs) - 1; i >= 0; i--) {
> + vcc = thc63->vccs[i];
> + if (!vcc)
> + continue;
> +
> + if (regulator_disable(vcc))
> + dev_dbg(thc63->dev,
> + "Failed to disable regulator %s\n",
> + thc63_reg_names[i]);
> + }
> +}
> +
> +struct drm_bridge_funcs thc63_bridge_func = {
Apparently you missed all my comments from v2 review.
If you like to avoid non-NULL function pointers to the void, please
use static const storage qualifier.
--
With best wishes,
Vladimir
next prev parent reply other threads:[~2018-03-27 6:24 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-16 15:16 [PATCH v6 0/3] drm: Add Thine THC63LVD1024 LVDS decoder bridge Jacopo Mondi
2018-03-16 15:16 ` [PATCH v6 1/3] dt-bindings: display: bridge: Document THC63LVD1024 LVDS decoder Jacopo Mondi
2018-03-20 12:43 ` Laurent Pinchart
2018-03-26 12:08 ` jacopo mondi
2018-03-26 22:22 ` Rob Herring
2018-03-27 6:15 ` Vladimir Zapolskiy
2018-03-27 7:12 ` Andrzej Hajda
2018-03-27 7:33 ` jacopo mondi
2018-03-27 8:27 ` Sergei Shtylyov
2018-03-27 8:30 ` Vladimir Zapolskiy
2018-03-27 8:57 ` jacopo mondi
2018-03-27 9:37 ` Vladimir Zapolskiy
2018-03-27 10:10 ` jacopo mondi
2018-03-27 11:03 ` Vladimir Zapolskiy
2018-03-29 10:02 ` jacopo mondi
2018-04-02 13:36 ` Laurent Pinchart
2018-04-03 12:33 ` jacopo mondi
2018-04-05 16:33 ` Rob Herring
2018-04-05 18:53 ` Laurent Pinchart
2018-04-05 21:27 ` Rob Herring
2018-03-16 15:16 ` [PATCH v6 2/3] drm: bridge: Add thc63lvd1024 LVDS decoder driver Jacopo Mondi
2018-03-20 13:00 ` Laurent Pinchart
2018-03-27 6:24 ` Vladimir Zapolskiy [this message]
2018-03-27 7:28 ` Andrzej Hajda
2018-03-27 7:36 ` Geert Uytterhoeven
2018-03-27 8:36 ` Andrzej Hajda
2018-03-27 9:06 ` Geert Uytterhoeven
2018-03-27 9:57 ` Vladimir Zapolskiy
2018-03-27 7:30 ` jacopo mondi
2018-03-16 15:16 ` [PATCH v6 3/3] arm64: dts: renesas: Add LVDS decoder to R-Car V3M Eagle Jacopo Mondi
2018-03-20 13:01 ` Laurent Pinchart
2018-03-27 6:27 ` Vladimir Zapolskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=30381869-9bc8-b6aa-a37a-598d9c8f280d@mentor.com \
--to=vladimir_zapolskiy@mentor.com \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=a.hajda@samsung.com \
--cc=airlied@linux.ie \
--cc=architt@codeaurora.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=geert@linux-m68k.org \
--cc=horms@verge.net.au \
--cc=jacopo+renesas@jmondi.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=mark.rutland@arm.com \
--cc=niklas.soderlund@ragnatech.se \
--cc=robh+dt@kernel.org \
--cc=sergei.shtylyov@cogentembedded.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®