From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755645AbaHFIft (ORCPT ); Wed, 6 Aug 2014 04:35:49 -0400 Received: from mail-bl2lp0211.outbound.protection.outlook.com ([207.46.163.211]:50636 "EHLO na01-bl2-obe.outbound.protection.outlook.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1755606AbaHFIfp (ORCPT ); Wed, 6 Aug 2014 04:35:45 -0400 From: Shengjiu Wang To: , , , , , , , CC: , , , Subject: [PATCH V2 3/3] ARM: imx6q: Add the clock route from external OSC to ESAI clock Date: Wed, 6 Aug 2014 16:35:15 +0800 Message-ID: <309d5e2cb941aba7d81e2d87a8237c4ef677e45c.1407313676.git.shengjiu.wang@freescale.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: References: X-EOPAttributedMessage: 0 X-Forefront-Antispam-Report: CIP:192.88.158.2;CTRY:US;IPV:CAL;IPV:NLI;EFV:NLI;SFV:NSPM;SFS:(6009001)(199002)(189002)(77156001)(83072002)(4396001)(36756003)(31966008)(89996001)(50226001)(46102001)(86362001)(83322001)(26826002)(47776003)(97736001)(93916002)(102836001)(6806004)(85852003)(87936001)(44976005)(19580405001)(19580395003)(88136002)(21056001)(95666004)(87286001)(106466001)(62966002)(105606002)(74502001)(74662001)(64706001)(50986999)(85306004)(92726001)(99396002)(2201001)(104016003)(76176999)(76482001)(33646002)(107046002)(92566001)(229853001)(50466002)(81542001)(20776003)(84676001)(69596002)(104166001)(80022001)(81156004)(79102001)(68736004)(48376002)(77982001)(81342001)(32563001);DIR:OUT;SFP:;SCL:1;SRVR:BL2PR03MB339;H:az84smr01.freescale.net;FPR:;MLV:ovrnspm;PTR:InfoDomainNonexistent;MX:1;LANG:en; MIME-Version: 1.0 Content-Type: text/plain X-Microsoft-Antispam: BCL:0;PCL:0;RULEID:;UriScan:; X-Forefront-PRVS: 02951C14DC Authentication-Results: spf=fail (sender IP is 192.88.158.2) smtp.mailfrom=shengjiu.wang@freescale.com; X-OriginatorOrg: freescale.com Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This patch mainly adds the clock route from external 24.576MHz OSC to internal ESAI clock via analog clock2 PADs on the SoC and pll4 so that ESAI can get an entirely synchronous clock source against CS42888. [ 1, We found if using pll4 to generate a 24.576MHz from inernal 24.0MHz OSC, we would get noise during the audio playback via ESAI->CS42888 even though this generated clock's rate is equal to the external one statistically. It might be resulted from the tiny difference between two clock source, which might be crucial to the sensitive CODEC we use -- CS42888. 2, Ideally, we should use bypass mode for pll4 since we only need to get the raw rate (24.576MHz) while currently bypass mode in clk-pllv3.c isn't supported. After bypass mode implement, then we can refine this patch.] Expected result: anaclk2 0 1 24576000 lvds2_in 0 1 24576000 pll4_sel 0 1 24576000 pll4_audio 0 1 786432000 pll4_post_div 0 1 786432000 pll4_audio_div 0 1 786432000 esai_sel 0 1 786432000 esai_pred 0 1 98304000 esai_podf 0 1 24576000 esai_extal 0 1 24576000 Signed-off-by: Nicolin Chen Signed-off-by: Shengjiu Wang --- arch/arm/mach-imx/clk-imx6q.c | 5 +++++ arch/arm/mach-imx/mach-imx6q.c | 28 ++++++++++++++++++++++++++++ 2 files changed, 33 insertions(+) diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 330aad3..29151cb 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -414,6 +414,10 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); clk_register_clkdev(clk[IMX6QDL_CLK_ENET_REF], "enet_ref", NULL); + clk_register_clkdev(clk[IMX6QDL_CLK_PLL4_AUDIO_DIV], "pll4_audio_div", NULL); + clk_register_clkdev(clk[IMX6QDL_CLK_PLL4_SEL], "pll4_sel", NULL); + clk_register_clkdev(clk[IMX6QDL_CLK_LVDS2_IN], "lvds2_in", NULL); + clk_register_clkdev(clk[IMX6QDL_CLK_ESAI_EXTAL], "esai_extal", NULL); if ((imx_get_soc_revision() != IMX_CHIP_REVISION_1_0) || cpu_is_imx6dl()) { @@ -457,6 +461,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) /* Audio-related clocks configuration */ clk_set_parent(clk[IMX6QDL_CLK_SPDIF_SEL], clk[IMX6QDL_CLK_PLL3_PFD3_454M]); + clk_set_parent(clk[IMX6QDL_CLK_ESAI_SEL], clk[IMX6QDL_CLK_PLL4_AUDIO_DIV]); /* All existing boards with PCIe use LVDS1 */ if (IS_ENABLED(CONFIG_PCI_IMX6)) diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index d51c6e9..ea24a96 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -362,6 +362,28 @@ put_node: of_node_put(np); } +#define ESAI_AUDIO_MCLK 24576000 + +static void __init imx6q_audio_lvds2_init(void) +{ + struct clk *pll4_sel, *lvds2_in, *pll4_audio_div, *esai_extal; + + pll4_audio_div = clk_get_sys(NULL, "pll4_audio_div"); + pll4_sel = clk_get_sys(NULL, "pll4_sel"); + lvds2_in = clk_get_sys(NULL, "lvds2_in"); + esai_extal = clk_get_sys(NULL, "esai_extal"); + if (IS_ERR(pll4_audio_div) || IS_ERR(pll4_sel) || + IS_ERR(lvds2_in) || IS_ERR(esai_extal)) + return; + + if (clk_get_rate(lvds2_in) != ESAI_AUDIO_MCLK) + return; + + clk_set_parent(pll4_sel, lvds2_in); + clk_set_rate(pll4_audio_div, 786432000); + clk_set_rate(esai_extal, ESAI_AUDIO_MCLK); +} + static struct platform_device imx6q_cpufreq_pdev = { .name = "imx6q-cpufreq", }; @@ -379,6 +401,12 @@ static void __init imx6q_init_late(void) imx6q_opp_init(); platform_device_register(&imx6q_cpufreq_pdev); } + + if (of_machine_is_compatible("fsl,imx6q-sabreauto") + || of_machine_is_compatible("fsl,imx6dl-sabreauto")) { + imx6q_audio_lvds2_init(); + } + } static void __init imx6q_map_io(void) -- 1.7.9.5