mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
To: Jonathan Cameron <jic23@kernel.org>, <lee@kernel.org>
Cc: <ukleinek@kernel.org>, <alexandre.torgue@foss.st.com>,
	<krzk+dt@kernel.org>, <conor+dt@kernel.org>,
	<daniel.lezcano@linaro.org>, <tglx@linutronix.de>,
	<robh@kernel.org>, <catalin.marinas@arm.com>, <will@kernel.org>,
	<devicetree@vger.kernel.org>, <wbg@kernel.org>,
	<linux-stm32@st-md-mailman.stormreply.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <linux-iio@vger.kernel.org>,
	<linux-pwm@vger.kernel.org>, <olivier.moysan@foss.st.com>
Subject: Re: [PATCH v4 3/8] iio: trigger: stm32-lptimer: add support for stm32mp25
Date: Thu, 27 Mar 2025 17:36:00 +0100	[thread overview]
Message-ID: <30d13179-66fc-4856-ac70-af051ec5fe8f@foss.st.com> (raw)
In-Reply-To: <20250315125615.065a2e74@jic23-huawei>

On 3/15/25 13:56, Jonathan Cameron wrote:
> On Fri, 14 Mar 2025 18:14:46 +0100
> Fabrice Gasnier <fabrice.gasnier@foss.st.com> wrote:
> 
>> From: Olivier Moysan <olivier.moysan@foss.st.com>
>>
>> Add support for STM32MP25 SoC. Use newly introduced compatible to handle
>> this new HW variant. Add new trigger definitions that can be used by the
>> stm32 analog-to-digital converter. Use compatible data to identify them.
>>
>> Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
>> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
> 
> How do you want this to merge?   If it's going through mfd because
> of dependencies, then
> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> 
> I haven't checked if there are any dependencies so shout if I should
> pick this up directly for next cycle.

Hi Jonathan, Lee,

There's no build dependency, but the dt-bindings that adds the
compatible string.

Perhaps Lee can pick it up along with the mfd bindings and driver ?

I'm not sure what the most suitable option is.

Best Regards,
Fabrice
> 
> Thanks,
> 
> Jonathan
> 
> 
>> ---
>> Changes in v4:
>> - Jonathan's comment: simplify infrastructure by keeping
>>   devm_iio_trigger_register. Don't need to cast compatible data.
>> ---
>>  drivers/iio/trigger/stm32-lptimer-trigger.c   | 75 ++++++++++++++-----
>>  include/linux/iio/timer/stm32-lptim-trigger.h |  9 +++
>>  2 files changed, 67 insertions(+), 17 deletions(-)
>>
>> diff --git a/drivers/iio/trigger/stm32-lptimer-trigger.c b/drivers/iio/trigger/stm32-lptimer-trigger.c
>> index f1e18913236a..3dcc8d2fe093 100644
>> --- a/drivers/iio/trigger/stm32-lptimer-trigger.c
>> +++ b/drivers/iio/trigger/stm32-lptimer-trigger.c
>> @@ -16,16 +16,43 @@
>>  #include <linux/platform_device.h>
>>  #include <linux/property.h>
>>  
>> -/* List Low-Power Timer triggers */
>> -static const char * const stm32_lptim_triggers[] = {
>> -	LPTIM1_OUT,
>> -	LPTIM2_OUT,
>> -	LPTIM3_OUT,
>> +/* Maximum triggers + one trailing null entry to indicate the end of array */
>> +#define MAX_TRIGGERS 3
>> +
>> +struct stm32_lptim_cfg {
>> +	const char * const (*triggers)[MAX_TRIGGERS];
>> +	unsigned int nb_triggers;
>> +};
>> +
>> +/* List Low-Power Timer triggers for H7, MP13, MP15 */
>> +static const char * const stm32_lptim_triggers[][MAX_TRIGGERS] = {
>> +	{ LPTIM1_OUT,},
>> +	{ LPTIM2_OUT,},
>> +	{ LPTIM3_OUT,},
>> +};
>> +
>> +/* List Low-Power Timer triggers for STM32MP25 */
>> +static const char * const stm32mp25_lptim_triggers[][MAX_TRIGGERS] = {
>> +	{ LPTIM1_CH1, LPTIM1_CH2, },
>> +	{ LPTIM2_CH1, LPTIM2_CH2, },
>> +	{ LPTIM3_CH1,},
>> +	{ LPTIM4_CH1,},
>> +	{ LPTIM5_OUT,},
>> +};
>> +
>> +static const struct stm32_lptim_cfg stm32mp15_lptim_cfg = {
>> +	.triggers = stm32_lptim_triggers,
>> +	.nb_triggers = ARRAY_SIZE(stm32_lptim_triggers),
>> +};
>> +
>> +static const struct stm32_lptim_cfg stm32mp25_lptim_cfg = {
>> +	.triggers = stm32mp25_lptim_triggers,
>> +	.nb_triggers = ARRAY_SIZE(stm32mp25_lptim_triggers),
>>  };
>>  
>>  struct stm32_lptim_trigger {
>>  	struct device *dev;
>> -	const char *trg;
>> +	const char * const *triggers;
>>  };
>>  
>>  static int stm32_lptim_validate_device(struct iio_trigger *trig,
>> @@ -56,22 +83,33 @@ EXPORT_SYMBOL(is_stm32_lptim_trigger);
>>  
>>  static int stm32_lptim_setup_trig(struct stm32_lptim_trigger *priv)
>>  {
>> -	struct iio_trigger *trig;
>> +	const char * const *cur = priv->triggers;
>> +	int ret;
>>  
>> -	trig = devm_iio_trigger_alloc(priv->dev, "%s", priv->trg);
>> -	if  (!trig)
>> -		return -ENOMEM;
>> +	while (cur && *cur) {
>> +		struct iio_trigger *trig;
>>  
>> -	trig->dev.parent = priv->dev->parent;
>> -	trig->ops = &stm32_lptim_trigger_ops;
>> -	iio_trigger_set_drvdata(trig, priv);
>> +		trig = devm_iio_trigger_alloc(priv->dev, "%s", *cur);
>> +		if  (!trig)
>> +			return -ENOMEM;
>>  
>> -	return devm_iio_trigger_register(priv->dev, trig);
>> +		trig->dev.parent = priv->dev->parent;
>> +		trig->ops = &stm32_lptim_trigger_ops;
>> +		iio_trigger_set_drvdata(trig, priv);
>> +
>> +		ret = devm_iio_trigger_register(priv->dev, trig);
>> +		if (ret)
>> +			return ret;
>> +		cur++;
>> +	}
>> +
>> +	return 0;
>>  }
>>  
>>  static int stm32_lptim_trigger_probe(struct platform_device *pdev)
>>  {
>>  	struct stm32_lptim_trigger *priv;
>> +	struct stm32_lptim_cfg const *lptim_cfg;
>>  	u32 index;
>>  
>>  	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
>> @@ -81,17 +119,20 @@ static int stm32_lptim_trigger_probe(struct platform_device *pdev)
>>  	if (device_property_read_u32(&pdev->dev, "reg", &index))
>>  		return -EINVAL;
>>  
>> -	if (index >= ARRAY_SIZE(stm32_lptim_triggers))
>> +	lptim_cfg = device_get_match_data(&pdev->dev);
>> +
>> +	if (index >= lptim_cfg->nb_triggers)
>>  		return -EINVAL;
>>  
>>  	priv->dev = &pdev->dev;
>> -	priv->trg = stm32_lptim_triggers[index];
>> +	priv->triggers = lptim_cfg->triggers[index];
>>  
>>  	return stm32_lptim_setup_trig(priv);
>>  }
>>  
>>  static const struct of_device_id stm32_lptim_trig_of_match[] = {
>> -	{ .compatible = "st,stm32-lptimer-trigger", },
>> +	{ .compatible = "st,stm32-lptimer-trigger", .data = &stm32mp15_lptim_cfg },
>> +	{ .compatible = "st,stm32mp25-lptimer-trigger", .data = &stm32mp25_lptim_cfg},
>>  	{},
>>  };
>>  MODULE_DEVICE_TABLE(of, stm32_lptim_trig_of_match);
>> diff --git a/include/linux/iio/timer/stm32-lptim-trigger.h b/include/linux/iio/timer/stm32-lptim-trigger.h
>> index a34dcf6a6001..ce3cf0addb2e 100644
>> --- a/include/linux/iio/timer/stm32-lptim-trigger.h
>> +++ b/include/linux/iio/timer/stm32-lptim-trigger.h
>> @@ -14,6 +14,15 @@
>>  #define LPTIM1_OUT	"lptim1_out"
>>  #define LPTIM2_OUT	"lptim2_out"
>>  #define LPTIM3_OUT	"lptim3_out"
>> +#define LPTIM4_OUT	"lptim4_out"
>> +#define LPTIM5_OUT	"lptim5_out"
>> +
>> +#define LPTIM1_CH1	"lptim1_ch1"
>> +#define LPTIM1_CH2	"lptim1_ch2"
>> +#define LPTIM2_CH1	"lptim2_ch1"
>> +#define LPTIM2_CH2	"lptim2_ch2"
>> +#define LPTIM3_CH1	"lptim3_ch1"
>> +#define LPTIM4_CH1	"lptim4_ch1"
>>  
>>  #if IS_REACHABLE(CONFIG_IIO_STM32_LPTIMER_TRIGGER)
>>  bool is_stm32_lptim_trigger(struct iio_trigger *trig);
> 

  reply	other threads:[~2025-03-27 16:39 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-03-14 17:14 [PATCH v4 0/8] Add STM32MP25 LPTIM support: MFD, PWM, IIO, counter, clocksource Fabrice Gasnier
2025-03-14 17:14 ` [PATCH v4 1/8] dt-bindings: mfd: stm32-lptimer: add support for stm32mp25 Fabrice Gasnier
2025-03-14 17:14 ` [PATCH v4 2/8] " Fabrice Gasnier
2025-04-04 14:40   ` Lee Jones
2025-04-24 13:01     ` Lee Jones
2025-04-25 12:50       ` Fabrice Gasnier
2025-03-14 17:14 ` [PATCH v4 3/8] iio: trigger: " Fabrice Gasnier
2025-03-15 12:56   ` Jonathan Cameron
2025-03-27 16:36     ` Fabrice Gasnier [this message]
2025-03-31 10:04       ` Jonathan Cameron
2025-03-14 17:14 ` [PATCH v4 4/8] clocksource: " Fabrice Gasnier
2025-04-08 14:48   ` Fabrice Gasnier
2025-03-14 17:14 ` [PATCH v4 5/8] pwm: stm32-lp: " Fabrice Gasnier
2025-04-04 15:07   ` Uwe Kleine-König
2025-03-14 17:14 ` [PATCH v4 6/8] arm64: defconfig: enable STM32 LP timer clockevent driver Fabrice Gasnier
2025-03-14 17:14 ` [PATCH v4 7/8] arm64: dts: st: add low-power timer nodes on stm32mp251 Fabrice Gasnier
2025-03-14 17:14 ` [PATCH v4 8/8] arm64: dts: st: use lptimer3 as tick broadcast source on stm32mp257f-ev1 Fabrice Gasnier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=30d13179-66fc-4856-ac70-af051ec5fe8f@foss.st.com \
    --to=fabrice.gasnier@foss.st.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=catalin.marinas@arm.com \
    --cc=conor+dt@kernel.org \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jic23@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=lee@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=olivier.moysan@foss.st.com \
    --cc=robh@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=ukleinek@kernel.org \
    --cc=wbg@kernel.org \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®