From: Chao Yu <yuchao0@huawei.com>
To: Jaegeuk Kim <jaegeuk@kernel.org>, <daeho43@gmail.com>
Cc: Eric Biggers <ebiggers@kernel.org>,
<linux-kernel@vger.kernel.org>,
<linux-f2fs-devel@lists.sourceforge.net>
Subject: Re: [f2fs-dev] [PATCH v3 2/2] f2fs: fix compat F2FS_IOC_{MOVE, GARBAGE_COLLECT}_RANGE
Date: Mon, 9 Nov 2020 10:14:55 +0800 [thread overview]
Message-ID: <3108fbd8-94c2-31e6-cbaf-ec4756f3dd88@huawei.com> (raw)
In-Reply-To: <20201106214028.GC1474936@google.com>
On 2020/11/7 5:40, Jaegeuk Kim wrote:
> On 11/06, Chao Yu wrote:
>> On 2020/11/6 8:05, Eric Biggers wrote:
>>> This patch is marked 2/2, but it seems you sent it out on its own. Patch series
>>> are supposed to be resend in full; otherwise people can see just one patch and
>>> have no context.
>>
>> That's a historical problem, as in last many years, we (f2fs community) don't have
>> other long-term reviewers except Jaegeuk and me, so we have unwritten rule: only
>> resending changed patch in patchset.
>>
>> IMO, that helps to skip traversing unchanged patches, and focusing reviewing on the
>> real change lines, and certainly we have its context in mind.
>>
>> Personally, I prefer to revise, resend or review patch{,es} of patchset have real
>> change line in f2fs mailing list, anyway we can discuss about the rule here.
>
> Chao, I think we need to change this to resend whole patch-set again, since
> it's a bit difficult to catch which part of patches were the latest one.
Oh, I've no objection, if it really helps you.
+Daeho,
Thanks,
>
>>
>>>
>>> On Thu, Nov 05, 2020 at 09:09:34AM +0800, Chao Yu wrote:
>>>> Eric reported a ioctl bug in below link:
>>>>
>>>> https://lore.kernel.org/linux-f2fs-devel/20201103032234.GB2875@sol.localdomain/
>>>>
>>>> That said, on some 32-bit architectures, u64 has only 32-bit alignment,
>>>> notably i386 and x86_32, so that size of struct f2fs_gc_range compiled
>>>> in x86_32 is 20 bytes, however the size in x86_64 is 24 bytes, binary
>>>> compiled in x86_32 can not call F2FS_IOC_GARBAGE_COLLECT_RANGE successfully
>>>> due to mismatched value of ioctl command in between binary and f2fs
>>>> module, similarly, F2FS_IOC_MOVE_RANGE will fail too.
>>>>
>>>> In this patch we introduce two ioctls for compatibility of above special
>>>> 32-bit binary:
>>>> - F2FS_IOC32_GARBAGE_COLLECT_RANGE
>>>> - F2FS_IOC32_MOVE_RANGE
>>>>
>>>
>>> It would be good to add a proper reported-by line, otherwise it's not clear who
>>> "Eric" is (there are lots of Erics):
>>>
>>> Reported-by: Eric Biggers <ebiggers@google.com>
>> Sure, although I attached the link includes original report email, in where it
>> points out who "Eric" is.
>>
>>>
>>>> +static int __f2fs_ioc_gc_range(struct file *filp, struct f2fs_gc_range *range)
>>>> {
>>>> - struct inode *inode = file_inode(filp);
>>>> - struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
>>>> - struct f2fs_gc_range range;
>>>> + struct f2fs_sb_info *sbi = F2FS_I_SB(file_inode(filp));
>>>> u64 end;
>>>> int ret;
>>>> + if (unlikely(f2fs_cp_error(sbi)))
>>>> + return -EIO;
>>>> + if (!f2fs_is_checkpoint_ready(sbi))
>>>> + return -ENOSPC;
>>>
>>> These two checkpoint-related checks weren't present in the original version.
>>> Is that intentional?
>>
>> Quoted
>>
>>> It would be better to have __f2fs_ioc_gc_range() handle the f2fs_cp_error(),
>>> f2fs_is_checkpoint_ready(), capable(), and f2fs_readonly() checks, so that they
>>> don't have to be duplicated in the native and compat cases.
>>
>>> Similarly for "move range".
>>
>> I missed to check the detail, and just follow, I can clean up it.
>>
>>>
>>>> +static int __f2fs_ioc_move_range(struct file *filp,
>>>> + struct f2fs_move_range *range)
>>>> {
>>>> - struct f2fs_move_range range;
>>>> + struct f2fs_sb_info *sbi = F2FS_I_SB(file_inode(filp));
>>>> struct fd dst;
>>>> int err;
>>>> + if (unlikely(f2fs_cp_error(sbi)))
>>>> + return -EIO;
>>>> + if (!f2fs_is_checkpoint_ready(sbi))
>>>> + return -ENOSPC;
>>>> +
>>>
>>> Likewise here.
>>>
>>>> diff --git a/include/uapi/linux/f2fs.h b/include/uapi/linux/f2fs.h
>>>> index f00199a2e38b..8c14e88a9645 100644
>>>> --- a/include/uapi/linux/f2fs.h
>>>> +++ b/include/uapi/linux/f2fs.h
>>>> @@ -5,6 +5,10 @@
>>>> #include <linux/types.h>
>>>> #include <linux/ioctl.h>
>>>> +#ifdef __KERNEL__
>>>> +#include <linux/compat.h>
>>>> +#endif
>>>> +
>>>> /*
>>>> * f2fs-specific ioctl commands
>>>> */
>>>> @@ -65,6 +69,16 @@ struct f2fs_gc_range {
>>>> __u64 len;
>>>> };
>>>> +#if defined(__KERNEL__) && defined(CONFIG_COMPAT)
>>>> +struct compat_f2fs_gc_range {
>>>> + u32 sync;
>>>> + compat_u64 start;
>>>> + compat_u64 len;
>>>> +};
>>>> +#define F2FS_IOC32_GARBAGE_COLLECT_RANGE _IOW(F2FS_IOCTL_MAGIC, 11,\
>>>> + struct compat_f2fs_gc_range)
>>>> +#endif
>>>> +
>>>> struct f2fs_defragment {
>>>> __u64 start;
>>>> __u64 len;
>>>> @@ -77,6 +91,17 @@ struct f2fs_move_range {
>>>> __u64 len; /* size to move */
>>>> };
>>>> +#if defined(__KERNEL__) && defined(CONFIG_COMPAT)
>>>> +struct compat_f2fs_move_range {
>>>> + u32 dst_fd;
>>>> + compat_u64 pos_in;
>>>> + compat_u64 pos_out;
>>>> + compat_u64 len;
>>>> +};
>>>> +#define F2FS_IOC32_MOVE_RANGE _IOWR(F2FS_IOCTL_MAGIC, 9, \
>>>> + struct compat_f2fs_move_range)
>>>> +#endif
>>>> +
>>>> struct f2fs_flush_device {
>>>> __u32 dev_num; /* device number to flush */
>>>> __u32 segments; /* # of segments to flush */
>>>> --
>>>
>>> Did you consider instead putting these compat definitions in an internal kernel
>>> header, or even just in the .c file, to avoid cluttering up the UAPI header?
>>
>> Better.
>>
>> I can move them before their use.
>>
>>>
>>> - Eric
>>> .
>>>
> .
>
prev parent reply other threads:[~2020-11-09 2:15 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-05 1:09 [PATCH v3 2/2] f2fs: fix compat F2FS_IOC_{MOVE,GARBAGE_COLLECT}_RANGE Chao Yu
2020-11-06 0:05 ` [f2fs-dev] [PATCH v3 2/2] f2fs: fix compat F2FS_IOC_{MOVE, GARBAGE_COLLECT}_RANGE Eric Biggers
2020-11-06 1:41 ` Chao Yu
2020-11-06 21:40 ` Jaegeuk Kim
2020-11-09 2:14 ` Chao Yu [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3108fbd8-94c2-31e6-cbaf-ec4756f3dd88@huawei.com \
--to=yuchao0@huawei.com \
--cc=daeho43@gmail.com \
--cc=ebiggers@kernel.org \
--cc=jaegeuk@kernel.org \
--cc=linux-f2fs-devel@lists.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®