From: Jonas Karlman <jonas@kwiboo.se>
To: Johan Jonker <jbx6244@gmail.com>,
Heiko Stuebner <heiko@sntech.de>,
Sandy Huang <hjc@rock-chips.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>,
Zheng Yang <zhengyang@rock-chips.com>,
linux-rockchip@lists.infradead.org,
dri-devel@lists.freedesktop.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Algea Cao <algea.cao@rock-chips.com>
Subject: Re: [PATCH v2 14/14] phy/rockchip: inno-hdmi: Support more pre-pll configuration
Date: Tue, 07 Jul 2020 21:05:49 +0000 (UTC) [thread overview]
Message-ID: <3124cfc2-8561-beff-5963-63f8f42bc644@kwiboo.se> (raw)
In-Reply-To: <425e10c2-ed03-be64-8153-9bc3657da10e@gmail.com>
On 2020-07-07 21:53, Johan Jonker wrote:
>
> Hi,
>
> What's the status for this patch?
> This is just what I needed for A95X Z2 to get the vop+hdmi and monitor
> working. ;)
>
> Could this become applied to mainline already?
> The ack is already there.
I will send a v3 of the phy/rockchip parts of this series later tonight/tomorrow.
The drm side still need work and I have some pending patches that also
improve rk3288/rk3399 hdmi support for up to 4k@30hz, should make its way
onto the list in a few days.
Regards,
Jonas
>
> Thanks,
>
> Johan Jonker
>
> https://lore.kernel.org/lkml/20200620134659.4592-1-jbx6244@gmail.com/
>
> On 1/8/20 10:07 PM, Jonas Karlman wrote:
>> From: Algea Cao <algea.cao@rock-chips.com>
>>
>> Adding the following freq cfg in 8-bit and 10-bit color depth:
>>
>> {
>> 40000000, 65000000, 71000000, 83500000, 85750000,
>> 88750000, 108000000, 119000000, 162000000
>> }
>>
>> New freq has been validated by quantumdata 980.
>>
>> For some freq which can't be got by only using integer freq div,
>> frac freq div is needed, Such as 88.75Mhz 10-bit. But The actual
>> freq is different from the target freq, We must try to narrow
>> the gap between them. RK322X only support integer freq div.
>>
>> The VCO of pre-PLL must be more than 2Ghz, otherwise PLL may be
>> unlocked.
>>
>> Signed-off-by: Algea Cao <algea.cao@rock-chips.com>
>> Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
>> Acked-by: Heiko Stuebner <heiko@sntech.de>
>> ---
>> drivers/phy/rockchip/phy-rockchip-inno-hdmi.c | 74 ++++++++++++-------
>> 1 file changed, 49 insertions(+), 25 deletions(-)
>>
>> diff --git a/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
>> index 3719309ad0d0..bb8bdf5e3301 100644
>> --- a/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
>> +++ b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
>> @@ -291,32 +291,56 @@ struct inno_hdmi_phy_drv_data {
>> const struct phy_config *phy_cfg_table;
>> };
>>
>> +/*
>> + * If only using integer freq div can't get frequency we want, frac
>> + * freq div is needed. For example, pclk 88.75 Mhz and tmdsclk
>> + * 110.9375 Mhz must use frac div 0xF00000. The actual frequency is different
>> + * from the target frequency. Such as the tmds clock 110.9375 Mhz,
>> + * the actual tmds clock we get is 110.93719 Mhz. It is important
>> + * to note that RK322X platforms do not support frac div.
>> + */
>> static const struct pre_pll_config pre_pll_cfg_table[] = {
>> - { 27000000, 27000000, 1, 90, 3, 2, 2, 10, 3, 3, 4, 0, 0},
>> - { 27000000, 33750000, 1, 90, 1, 3, 3, 10, 3, 3, 4, 0, 0},
>> - { 40000000, 40000000, 1, 80, 2, 2, 2, 12, 2, 2, 2, 0, 0},
>> - { 59341000, 59341000, 1, 98, 3, 1, 2, 1, 3, 3, 4, 0, 0xE6AE6B},
>> - { 59400000, 59400000, 1, 99, 3, 1, 1, 1, 3, 3, 4, 0, 0},
>> - { 59341000, 74176250, 1, 98, 0, 3, 3, 1, 3, 3, 4, 0, 0xE6AE6B},
>> - { 59400000, 74250000, 1, 99, 1, 2, 2, 1, 3, 3, 4, 0, 0},
>> - { 74176000, 74176000, 1, 98, 1, 2, 2, 1, 2, 3, 4, 0, 0xE6AE6B},
>> - { 74250000, 74250000, 1, 99, 1, 2, 2, 1, 2, 3, 4, 0, 0},
>> - { 74176000, 92720000, 4, 494, 1, 2, 2, 1, 3, 3, 4, 0, 0x816817},
>> - { 74250000, 92812500, 4, 495, 1, 2, 2, 1, 3, 3, 4, 0, 0},
>> - {148352000, 148352000, 1, 98, 1, 1, 1, 1, 2, 2, 2, 0, 0xE6AE6B},
>> - {148500000, 148500000, 1, 99, 1, 1, 1, 1, 2, 2, 2, 0, 0},
>> - {148352000, 185440000, 4, 494, 0, 2, 2, 1, 3, 2, 2, 0, 0x816817},
>> - {148500000, 185625000, 4, 495, 0, 2, 2, 1, 3, 2, 2, 0, 0},
>> - {296703000, 296703000, 1, 98, 0, 1, 1, 1, 0, 2, 2, 0, 0xE6AE6B},
>> - {297000000, 297000000, 1, 99, 0, 1, 1, 1, 0, 2, 2, 0, 0},
>> - {296703000, 370878750, 4, 494, 1, 2, 0, 1, 3, 1, 1, 0, 0x816817},
>> - {297000000, 371250000, 4, 495, 1, 2, 0, 1, 3, 1, 1, 0, 0},
>> - {593407000, 296703500, 1, 98, 0, 1, 1, 1, 0, 2, 1, 0, 0xE6AE6B},
>> - {594000000, 297000000, 1, 99, 0, 1, 1, 1, 0, 2, 1, 0, 0},
>> - {593407000, 370879375, 4, 494, 1, 2, 0, 1, 3, 1, 1, 1, 0x816817},
>> - {594000000, 371250000, 4, 495, 1, 2, 0, 1, 3, 1, 1, 1, 0},
>> - {593407000, 593407000, 1, 98, 0, 2, 0, 1, 0, 1, 1, 0, 0xE6AE6B},
>> - {594000000, 594000000, 1, 99, 0, 2, 0, 1, 0, 1, 1, 0, 0},
>> + { 27000000, 27000000, 1, 90, 3, 2, 2, 10, 3, 3, 4, 0, 0},
>> + { 27000000, 33750000, 1, 90, 1, 3, 3, 10, 3, 3, 4, 0, 0},
>> + { 40000000, 40000000, 1, 80, 2, 2, 2, 12, 2, 2, 2, 0, 0},
>> + { 40000000, 50000000, 1, 100, 2, 2, 2, 1, 0, 0, 15, 0, 0},
>> + { 59341000, 59341000, 1, 98, 3, 1, 2, 1, 3, 3, 4, 0, 0xE6AE6B},
>> + { 59400000, 59400000, 1, 99, 3, 1, 1, 1, 3, 3, 4, 0, 0},
>> + { 59341000, 74176250, 1, 98, 0, 3, 3, 1, 3, 3, 4, 0, 0xE6AE6B},
>> + { 59400000, 74250000, 1, 99, 1, 2, 2, 1, 3, 3, 4, 0, 0},
>> + { 65000000, 65000000, 1, 130, 2, 2, 2, 1, 0, 0, 12, 0, 0},
>> + { 65000000, 81250000, 3, 325, 0, 3, 3, 1, 0, 0, 10, 0, 0},
>> + { 71000000, 71000000, 3, 284, 0, 3, 3, 1, 0, 0, 8, 0, 0},
>> + { 71000000, 88750000, 3, 355, 0, 3, 3, 1, 0, 0, 10, 0, 0},
>> + { 74176000, 74176000, 1, 98, 1, 2, 2, 1, 2, 3, 4, 0, 0xE6AE6B},
>> + { 74250000, 74250000, 1, 99, 1, 2, 2, 1, 2, 3, 4, 0, 0},
>> + { 74176000, 92720000, 4, 494, 1, 2, 2, 1, 3, 3, 4, 0, 0x816817},
>> + { 74250000, 92812500, 4, 495, 1, 2, 2, 1, 3, 3, 4, 0, 0},
>> + { 83500000, 83500000, 2, 167, 2, 1, 1, 1, 0, 0, 6, 0, 0},
>> + { 83500000, 104375000, 1, 104, 2, 1, 1, 1, 1, 0, 5, 0, 0x600000},
>> + { 85750000, 85750000, 3, 343, 0, 3, 3, 1, 0, 0, 8, 0, 0},
>> + { 88750000, 88750000, 3, 355, 0, 3, 3, 1, 0, 0, 8, 0, 0},
>> + { 88750000, 110937500, 1, 110, 2, 1, 1, 1, 1, 0, 5, 0, 0xF00000},
>> + {108000000, 108000000, 1, 90, 3, 0, 0, 1, 0, 0, 5, 0, 0},
>> + {108000000, 135000000, 1, 90, 0, 2, 2, 1, 0, 0, 5, 0, 0},
>> + {119000000, 119000000, 1, 119, 2, 1, 1, 1, 0, 0, 6, 0, 0},
>> + {119000000, 148750000, 1, 99, 0, 2, 2, 1, 0, 0, 5, 0, 0x2AAAAA},
>> + {148352000, 148352000, 1, 98, 1, 1, 1, 1, 2, 2, 2, 0, 0xE6AE6B},
>> + {148500000, 148500000, 1, 99, 1, 1, 1, 1, 2, 2, 2, 0, 0},
>> + {148352000, 185440000, 4, 494, 0, 2, 2, 1, 3, 2, 2, 0, 0x816817},
>> + {148500000, 185625000, 4, 495, 0, 2, 2, 1, 3, 2, 2, 0, 0},
>> + {162000000, 162000000, 1, 108, 0, 2, 2, 1, 0, 0, 4, 0, 0},
>> + {162000000, 202500000, 1, 135, 0, 2, 2, 1, 0, 0, 5, 0, 0},
>> + {296703000, 296703000, 1, 98, 0, 1, 1, 1, 0, 2, 2, 0, 0xE6AE6B},
>> + {297000000, 297000000, 1, 99, 0, 1, 1, 1, 0, 2, 2, 0, 0},
>> + {296703000, 370878750, 4, 494, 1, 2, 0, 1, 3, 1, 1, 0, 0x816817},
>> + {297000000, 371250000, 4, 495, 1, 2, 0, 1, 3, 1, 1, 0, 0},
>> + {593407000, 296703500, 1, 98, 0, 1, 1, 1, 0, 2, 1, 0, 0xE6AE6B},
>> + {594000000, 297000000, 1, 99, 0, 1, 1, 1, 0, 2, 1, 0, 0},
>> + {593407000, 370879375, 4, 494, 1, 2, 0, 1, 3, 1, 1, 1, 0x816817},
>> + {594000000, 371250000, 4, 495, 1, 2, 0, 1, 3, 1, 1, 1, 0},
>> + {593407000, 593407000, 1, 98, 0, 2, 0, 1, 0, 1, 1, 0, 0xE6AE6B},
>> + {594000000, 594000000, 1, 99, 0, 2, 0, 1, 0, 1, 1, 0, 0},
>> { /* sentinel */ }
>> };
>>
>>
>
next prev parent reply other threads:[~2020-07-07 21:05 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-08 21:07 [PATCH v2 00/14] Support more HDMI modes on RK3228/RK3328 Jonas Karlman
2020-01-08 21:07 ` [PATCH v2 01/14] phy/rockchip: inno-hdmi: use correct vco_div_5 macro on rk3328 Jonas Karlman
2020-01-08 21:07 ` [PATCH v2 02/14] phy/rockchip: inno-hdmi: round fractal pixclock in rk3328 recalc_rate Jonas Karlman
2020-01-08 21:07 ` [PATCH v2 03/14] phy/rockchip: inno-hdmi: remove unused no_c from " Jonas Karlman
2020-01-08 21:07 ` [PATCH v2 04/14] phy/rockchip: inno-hdmi: do not power on rk3328 post pll on reg write Jonas Karlman
2020-01-08 21:07 ` [PATCH v2 05/14] phy/rockchip: inno-hdmi: force set_rate on power_on Jonas Karlman
2020-01-08 21:07 ` [PATCH v2 06/14] drm/rockchip: dw-hdmi: allow high tmds bit rates Jonas Karlman
2020-01-08 21:07 ` [PATCH v2 07/14] drm/rockchip: dw-hdmi: require valid vpll clock rate on rk3228/rk3328 Jonas Karlman
2020-01-08 21:07 ` [PATCH v2 08/14] clk: rockchip: set parent rate for DCLK_VOP clock on rk3228 Jonas Karlman
2020-01-08 21:07 ` [PATCH v2 10/14] arm64: dts: rockchip: add vpll clock to hdmi node on rk3328 Jonas Karlman
2020-01-08 21:07 ` [PATCH v2 09/14] arm64: dts: rockchip: increase vop clock rate " Jonas Karlman
2020-01-08 21:07 ` [PATCH v2 11/14] ARM: dts: rockchip: add vpll clock to hdmi node on rk3228 Jonas Karlman
2020-01-08 21:07 ` [PATCH v2 13/14] drm/rockchip: dw-hdmi: remove unused plat_data on rk3228/rk3328 Jonas Karlman
2020-01-08 21:07 ` [PATCH v2 12/14] drm/rockchip: dw-hdmi: limit tmds to 340mhz " Jonas Karlman
2020-01-08 21:07 ` [PATCH v2 14/14] phy/rockchip: inno-hdmi: Support more pre-pll configuration Jonas Karlman
2020-07-07 19:53 ` Johan Jonker
2020-07-07 21:05 ` Jonas Karlman [this message]
2020-01-10 11:01 ` [PATCH v2 00/14] Support more HDMI modes on RK3228/RK3328 Kishon Vijay Abraham I
2020-01-10 16:56 ` Jonas Karlman
2020-09-22 20:59 ` [PATCH v3 0/6] " Jonas Karlman
2020-09-22 20:59 ` [PATCH v3 1/6] phy/rockchip: inno-hdmi: use correct vco_div_5 macro on rk3328 Jonas Karlman
2020-09-22 20:59 ` [PATCH v3 2/6] phy/rockchip: inno-hdmi: round fractal pixclock in rk3328 recalc_rate Jonas Karlman
2020-09-22 20:59 ` [PATCH v3 3/6] phy/rockchip: inno-hdmi: remove unused no_c from " Jonas Karlman
2020-09-22 20:59 ` [PATCH v3 4/6] phy/rockchip: inno-hdmi: do not power on rk3328 post pll on reg write Jonas Karlman
2020-09-22 20:59 ` [PATCH v3 5/6] phy/rockchip: inno-hdmi: force set_rate on power_on Jonas Karlman
2020-09-22 20:59 ` [PATCH v3 6/6] phy/rockchip: inno-hdmi: Support more pre-pll configuration Jonas Karlman
2020-10-10 15:32 ` [PATCH v3 0/6] Support more HDMI modes on RK3228/RK3328 Jonas Karlman
2020-10-10 15:32 ` [PATCH v3 2/6] phy/rockchip: inno-hdmi: round fractal pixclock in rk3328 recalc_rate Jonas Karlman
2020-10-10 15:32 ` [PATCH v3 1/6] phy/rockchip: inno-hdmi: use correct vco_div_5 macro on rk3328 Jonas Karlman
2020-10-10 15:32 ` [PATCH v3 3/6] phy/rockchip: inno-hdmi: remove unused no_c from rk3328 recalc_rate Jonas Karlman
2020-10-10 15:32 ` [PATCH v3 4/6] phy/rockchip: inno-hdmi: do not power on rk3328 post pll on reg write Jonas Karlman
2020-10-10 15:32 ` [PATCH v3 5/6] phy/rockchip: inno-hdmi: force set_rate on power_on Jonas Karlman
2020-10-10 15:32 ` [PATCH v3 6/6] phy/rockchip: inno-hdmi: Support more pre-pll configuration Jonas Karlman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3124cfc2-8561-beff-5963-63f8f42bc644@kwiboo.se \
--to=jonas@kwiboo.se \
--cc=algea.cao@rock-chips.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=heiko@sntech.de \
--cc=hjc@rock-chips.com \
--cc=jbx6244@gmail.com \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=zhengyang@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®