From: "Rafael J. Wysocki" <rjw@rjwysocki.net>
To: platform-driver-x86@vger.kernel.org
Cc: "Darren Hart" <dvhart@infradead.org>,
LKML <linux-kernel@vger.kernel.org>,
"Linux ACPI" <linux-acpi@vger.kernel.org>,
"Andy Shevchenko" <andriy.shevchenko@linux.intel.com>,
"Jérôme de Bretagne" <jerome.debretagne@gmail.com>,
"Mario Limonciello" <mario.limonciello@dell.com>,
"Alex Hung" <alex.hung@canonical.com>
Subject: Re: [PATCH] platform/x86: intel-hid: Wake up Dell Latitude 7275 from suspend-to-idle
Date: Mon, 31 Jul 2017 23:46:28 +0200 [thread overview]
Message-ID: <3172146.dPhkKZoKtx@aspire.rjw.lan> (raw)
In-Reply-To: <7313224.XbtxUoJtXM@aspire.rjw.lan>
On Friday, July 28, 2017 02:06:36 AM Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>
> On Dell Latitude 7275 the 5-button array is not exposed in the
> ACPI tables, but still notifies are sent to the Intel HID device
> object (device ID INT33D5) in response to power button actions while
> suspended to idle. However, they are currently ignored as the
> intel-hid driver is not prepared to take care of them.
>
> As a result, power button wakeup from suspend-to-idle doesn't work
> on this platform, but suspend-to-idle is the only reliable suspend
> variant on it (the S3 implementation in the platform firmware turns
> out to be broken), so it would be good to handle it properly.
>
> For this reason, add an upfront check against the power button press
> event (0xCE) to notify_handler() in the wakeup mode which allows it
> to catch the power button wakeup notification on the affected
> platform (even though priv->array is NULL on it) and should not
> change the behavior on platforms with priv->array present (because
> priv->array contains the event in question in those cases).
>
> Link: https://bugzilla.kernel.org/show_bug.cgi?id=196115
> Tested-by: Jérôme de Bretagne <jerome.debretagne@gmail.com>
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Please note that this change is requisite for
https://patchwork.kernel.org/patch/9873159/
so are there any objections or concerns?
> ---
> drivers/platform/x86/intel-hid.c | 17 ++++++++++++++---
> 1 file changed, 14 insertions(+), 3 deletions(-)
>
> Index: linux-pm/drivers/platform/x86/intel-hid.c
> ===================================================================
> --- linux-pm.orig/drivers/platform/x86/intel-hid.c
> +++ linux-pm/drivers/platform/x86/intel-hid.c
> @@ -203,15 +203,26 @@ static void notify_handler(acpi_handle h
> acpi_status status;
>
> if (priv->wakeup_mode) {
> + /*
> + * Needed for wakeup from suspend-to-idle to work on some
> + * platforms that don't expose the 5-button array, but still
> + * send notifies with the power button event code to this
> + * device object on power button actions while suspended.
> + */
> + if (event == 0xce)
> + goto wakeup;
> +
> /* Wake up on 5-button array events only. */
> if (event == 0xc0 || !priv->array)
> return;
>
> - if (sparse_keymap_entry_from_scancode(priv->array, event))
> - pm_wakeup_hard_event(&device->dev);
> - else
> + if (!sparse_keymap_entry_from_scancode(priv->array, event)) {
> dev_info(&device->dev, "unknown event 0x%x\n", event);
> + return;
> + }
>
> +wakeup:
> + pm_wakeup_hard_event(&device->dev);
> return;
> }
>
>
next prev parent reply other threads:[~2017-07-31 21:54 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-28 0:06 Rafael J. Wysocki
2017-07-31 21:46 ` Rafael J. Wysocki [this message]
2017-07-31 23:21 ` Andy Shevchenko
2017-08-01 11:56 ` Rafael J. Wysocki
2017-08-01 12:37 ` Andy Shevchenko
2017-08-01 17:04 ` Mario.Limonciello
2017-08-02 9:07 ` Jérôme de Bretagne
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3172146.dPhkKZoKtx@aspire.rjw.lan \
--to=rjw@rjwysocki.net \
--cc=alex.hung@canonical.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=dvhart@infradead.org \
--cc=jerome.debretagne@gmail.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mario.limonciello@dell.com \
--cc=platform-driver-x86@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®