Re: [PATCH v2] firmware: xilinx: Dont send linux address to get fpga config get status

[Michal Simek <michal.simek@amd.com>]

On 2/7/25 06:49, Nava kishore Manne wrote:
> From: Siva Durga Prasad Paladugu <siva.durga.prasad.paladugu@amd.com>
> 
> Fpga get config status just returns status through ret_payload and there
> is no need to allocate local buf and send its address through SMC args.
> Moreover, the address that is being passed till now is linux virtual
> address and is incorrect.
> Corresponding modification has been done in the firmware to avoid using the
> address sent by linux.
> 
> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.prasad.paladugu@amd.com>
> Signed-off-by: Nava kishore Manne <nava.kishore.manne@amd.com>
> ---
> Changes for v2:
>   - Drop the specified patch:
>     https://lore.kernel.org/lkml/DS7PR12MB6070A83267558A7D545E3383CDF72@DS7PR12MB6070.namprd12.prod.outlook.com/
>   - Rebase the patch on v6.14-rc1 without any changes.
> 
>   drivers/firmware/xilinx/zynqmp.c | 6 +-----
>   1 file changed, 1 insertion(+), 5 deletions(-)
> 
> diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
> index 720fa8b5d8e9..7356e860e65c 100644
> --- a/drivers/firmware/xilinx/zynqmp.c
> +++ b/drivers/firmware/xilinx/zynqmp.c
> @@ -1139,17 +1139,13 @@ EXPORT_SYMBOL_GPL(zynqmp_pm_fpga_get_status);
>   int zynqmp_pm_fpga_get_config_status(u32 *value)
>   {
>   	u32 ret_payload[PAYLOAD_ARG_CNT];
> -	u32 buf, lower_addr, upper_addr;
>   	int ret;
>   
>   	if (!value)
>   		return -EINVAL;
>   
> -	lower_addr = lower_32_bits((u64)&buf);
> -	upper_addr = upper_32_bits((u64)&buf);
> -
>   	ret = zynqmp_pm_invoke_fn(PM_FPGA_READ, ret_payload, 4,
> -				  XILINX_ZYNQMP_PM_FPGA_CONFIG_STAT_OFFSET, lower_addr, upper_addr,
> +				  XILINX_ZYNQMP_PM_FPGA_CONFIG_STAT_OFFSET, 0, 0,
>   				  XILINX_ZYNQMP_PM_FPGA_READ_CONFIG_REG);
>   
>   	*value = ret_payload[1];

Applied.
M