From: Chanwoo Choi <cw00.choi@samsung.com>
To: Sam Protsenko <semen.protsenko@linaro.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
Rob Herring <robh+dt@kernel.org>,
Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Jaewon Kim <jaewon02.kim@samsung.com>,
Chanho Park <chanho61.park@samsung.com>,
David Virag <virag.david003@gmail.com>,
Youngmin Nam <youngmin.nam@samsung.com>,
Tomasz Figa <tomasz.figa@gmail.com>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
Daniel Palmer <daniel@0x0f.com>,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org
Subject: Re: [PATCH 2/7] clk: samsung: exynos850: Add missing sysreg clocks
Date: Thu, 16 Dec 2021 16:04:04 +0900 [thread overview]
Message-ID: <31bbb0a6-0b46-b195-2376-a92a04666f0a@samsung.com> (raw)
In-Reply-To: <20211215160906.17451-3-semen.protsenko@linaro.org>
On 12/16/21 1:09 AM, Sam Protsenko wrote:
> System Register is used to configure system behavior, like USI protocol,
> etc. SYSREG clocks should be provided to corresponding syscon nodes, to
> make it possible to modify SYSREG registers.
>
> While at it, add also missing PMU and GPIO clocks, which looks necessary
> and might be needed for corresponding Exynos850 features soon.
>
> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
> ---
> drivers/clk/samsung/clk-exynos850.c | 29 +++++++++++++++++++++++++++++
> 1 file changed, 29 insertions(+)
>
> diff --git a/drivers/clk/samsung/clk-exynos850.c b/drivers/clk/samsung/clk-exynos850.c
> index 568ac97c8120..4799771d09bc 100644
> --- a/drivers/clk/samsung/clk-exynos850.c
> +++ b/drivers/clk/samsung/clk-exynos850.c
> @@ -426,11 +426,14 @@ CLK_OF_DECLARE(exynos850_cmu_top, "samsung,exynos850-cmu-top",
> #define CLK_CON_DIV_DIV_CLK_APM_I3C 0x1808
> #define CLK_CON_GAT_CLKCMU_CMGP_BUS 0x2000
> #define CLK_CON_GAT_GATE_CLKCMU_CHUB_BUS 0x2014
> +#define CLK_CON_GAT_GOUT_APM_APBIF_GPIO_ALIVE_PCLK 0x2018
> +#define CLK_CON_GAT_GOUT_APM_APBIF_PMU_ALIVE_PCLK 0x2020
> #define CLK_CON_GAT_GOUT_APM_APBIF_RTC_PCLK 0x2024
> #define CLK_CON_GAT_GOUT_APM_APBIF_TOP_RTC_PCLK 0x2028
> #define CLK_CON_GAT_GOUT_APM_I3C_APM_PMIC_I_PCLK 0x2034
> #define CLK_CON_GAT_GOUT_APM_I3C_APM_PMIC_I_SCLK 0x2038
> #define CLK_CON_GAT_GOUT_APM_SPEEDY_APM_PCLK 0x20bc
> +#define CLK_CON_GAT_GOUT_APM_SYSREG_APM_PCLK 0x20c0
>
> static const unsigned long apm_clk_regs[] __initconst = {
> PLL_CON0_MUX_CLKCMU_APM_BUS_USER,
> @@ -445,11 +448,14 @@ static const unsigned long apm_clk_regs[] __initconst = {
> CLK_CON_DIV_DIV_CLK_APM_I3C,
> CLK_CON_GAT_CLKCMU_CMGP_BUS,
> CLK_CON_GAT_GATE_CLKCMU_CHUB_BUS,
> + CLK_CON_GAT_GOUT_APM_APBIF_GPIO_ALIVE_PCLK,
> + CLK_CON_GAT_GOUT_APM_APBIF_PMU_ALIVE_PCLK,
> CLK_CON_GAT_GOUT_APM_APBIF_RTC_PCLK,
> CLK_CON_GAT_GOUT_APM_APBIF_TOP_RTC_PCLK,
> CLK_CON_GAT_GOUT_APM_I3C_APM_PMIC_I_PCLK,
> CLK_CON_GAT_GOUT_APM_I3C_APM_PMIC_I_SCLK,
> CLK_CON_GAT_GOUT_APM_SPEEDY_APM_PCLK,
> + CLK_CON_GAT_GOUT_APM_SYSREG_APM_PCLK,
> };
>
> /* List of parent clocks for Muxes in CMU_APM */
> @@ -512,6 +518,14 @@ static const struct samsung_gate_clock apm_gate_clks[] __initconst = {
> CLK_CON_GAT_GOUT_APM_I3C_APM_PMIC_I_SCLK, 21, 0, 0),
> GATE(CLK_GOUT_SPEEDY_PCLK, "gout_speedy_pclk", "dout_apm_bus",
> CLK_CON_GAT_GOUT_APM_SPEEDY_APM_PCLK, 21, 0, 0),
> + /* TODO: Should be enabled in GPIO driver (or made CLK_IS_CRITICAL) */
> + GATE(CLK_GOUT_GPIO_ALIVE_PCLK, "gout_gpio_alive_pclk", "dout_apm_bus",
> + CLK_CON_GAT_GOUT_APM_APBIF_GPIO_ALIVE_PCLK, 21, CLK_IGNORE_UNUSED,
> + 0),
> + GATE(CLK_GOUT_PMU_ALIVE_PCLK, "gout_pmu_alive_pclk", "dout_apm_bus",
> + CLK_CON_GAT_GOUT_APM_APBIF_PMU_ALIVE_PCLK, 21, 0, 0),
> + GATE(CLK_GOUT_SYSREG_APM_PCLK, "gout_sysreg_apm_pclk", "dout_apm_bus",
> + CLK_CON_GAT_GOUT_APM_SYSREG_APM_PCLK, 21, 0, 0),
> };
>
> static const struct samsung_cmu_info apm_cmu_info __initconst = {
> @@ -541,6 +555,7 @@ static const struct samsung_cmu_info apm_cmu_info __initconst = {
> #define CLK_CON_GAT_GOUT_CMGP_ADC_PCLK_S0 0x200c
> #define CLK_CON_GAT_GOUT_CMGP_ADC_PCLK_S1 0x2010
> #define CLK_CON_GAT_GOUT_CMGP_GPIO_PCLK 0x2018
> +#define CLK_CON_GAT_GOUT_CMGP_SYSREG_CMGP_PCLK 0x2040
> #define CLK_CON_GAT_GOUT_CMGP_USI_CMGP0_IPCLK 0x2044
> #define CLK_CON_GAT_GOUT_CMGP_USI_CMGP0_PCLK 0x2048
> #define CLK_CON_GAT_GOUT_CMGP_USI_CMGP1_IPCLK 0x204c
> @@ -556,6 +571,7 @@ static const unsigned long cmgp_clk_regs[] __initconst = {
> CLK_CON_GAT_GOUT_CMGP_ADC_PCLK_S0,
> CLK_CON_GAT_GOUT_CMGP_ADC_PCLK_S1,
> CLK_CON_GAT_GOUT_CMGP_GPIO_PCLK,
> + CLK_CON_GAT_GOUT_CMGP_SYSREG_CMGP_PCLK,
> CLK_CON_GAT_GOUT_CMGP_USI_CMGP0_IPCLK,
> CLK_CON_GAT_GOUT_CMGP_USI_CMGP0_PCLK,
> CLK_CON_GAT_GOUT_CMGP_USI_CMGP1_IPCLK,
> @@ -610,6 +626,9 @@ static const struct samsung_gate_clock cmgp_gate_clks[] __initconst = {
> GATE(CLK_GOUT_CMGP_USI1_PCLK, "gout_cmgp_usi1_pclk",
> "gout_clkcmu_cmgp_bus",
> CLK_CON_GAT_GOUT_CMGP_USI_CMGP1_PCLK, 21, 0, 0),
> + GATE(CLK_GOUT_SYSREG_CMGP_PCLK, "gout_sysreg_cmgp_pclk",
> + "gout_clkcmu_cmgp_bus",
> + CLK_CON_GAT_GOUT_CMGP_SYSREG_CMGP_PCLK, 21, 0, 0),
> };
>
> static const struct samsung_cmu_info cmgp_cmu_info __initconst = {
> @@ -910,10 +929,12 @@ CLK_OF_DECLARE(exynos850_cmu_peri, "samsung,exynos850-cmu-peri",
> #define CLK_CON_DIV_DIV_CLK_CORE_BUSP 0x1800
> #define CLK_CON_GAT_GOUT_CORE_CCI_550_ACLK 0x2038
> #define CLK_CON_GAT_GOUT_CORE_GIC_CLK 0x2040
> +#define CLK_CON_GAT_GOUT_CORE_GPIO_CORE_PCLK 0x2044
> #define CLK_CON_GAT_GOUT_CORE_MMC_EMBD_I_ACLK 0x20e8
> #define CLK_CON_GAT_GOUT_CORE_MMC_EMBD_SDCLKIN 0x20ec
> #define CLK_CON_GAT_GOUT_CORE_SSS_I_ACLK 0x2128
> #define CLK_CON_GAT_GOUT_CORE_SSS_I_PCLK 0x212c
> +#define CLK_CON_GAT_GOUT_CORE_SYSREG_CORE_PCLK 0x2130
>
> static const unsigned long core_clk_regs[] __initconst = {
> PLL_CON0_MUX_CLKCMU_CORE_BUS_USER,
> @@ -924,10 +945,12 @@ static const unsigned long core_clk_regs[] __initconst = {
> CLK_CON_DIV_DIV_CLK_CORE_BUSP,
> CLK_CON_GAT_GOUT_CORE_CCI_550_ACLK,
> CLK_CON_GAT_GOUT_CORE_GIC_CLK,
> + CLK_CON_GAT_GOUT_CORE_GPIO_CORE_PCLK,
> CLK_CON_GAT_GOUT_CORE_MMC_EMBD_I_ACLK,
> CLK_CON_GAT_GOUT_CORE_MMC_EMBD_SDCLKIN,
> CLK_CON_GAT_GOUT_CORE_SSS_I_ACLK,
> CLK_CON_GAT_GOUT_CORE_SSS_I_PCLK,
> + CLK_CON_GAT_GOUT_CORE_SYSREG_CORE_PCLK,
> };
>
> /* List of parent clocks for Muxes in CMU_CORE */
> @@ -972,6 +995,12 @@ static const struct samsung_gate_clock core_gate_clks[] __initconst = {
> CLK_CON_GAT_GOUT_CORE_SSS_I_ACLK, 21, 0, 0),
> GATE(CLK_GOUT_SSS_PCLK, "gout_sss_pclk", "dout_core_busp",
> CLK_CON_GAT_GOUT_CORE_SSS_I_PCLK, 21, 0, 0),
> + /* TODO: Should be enabled in GPIO driver (or made CLK_IS_CRITICAL) */
> + GATE(CLK_GOUT_GPIO_CORE_PCLK, "gout_gpio_core_pclk", "dout_core_busp",
> + CLK_CON_GAT_GOUT_CORE_GPIO_CORE_PCLK, 21, CLK_IGNORE_UNUSED, 0),
> + GATE(CLK_GOUT_SYSREG_CORE_PCLK, "gout_sysreg_core_pclk",
> + "dout_core_busp",
> + CLK_CON_GAT_GOUT_CORE_SYSREG_CORE_PCLK, 21, 0, 0),
> };
>
> static const struct samsung_cmu_info core_cmu_info __initconst = {
>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
--
Best Regards,
Chanwoo Choi
Samsung Electronics
next prev parent reply other threads:[~2021-12-16 6:41 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-15 16:08 [PATCH 0/7] arm64: dts: exynos: Add E850-96 board support Sam Protsenko
2021-12-15 16:09 ` [PATCH 1/7] dt-bindings: clock: exynos850: Add bindings for Exynos850 sysreg clocks Sam Protsenko
2021-12-15 16:11 ` Krzysztof Kozlowski
2021-12-16 7:03 ` Chanwoo Choi
2021-12-16 17:48 ` Rob Herring
2021-12-16 19:47 ` Sam Protsenko
2021-12-15 16:09 ` [PATCH 2/7] clk: samsung: exynos850: Add missing " Sam Protsenko
2021-12-15 16:12 ` Krzysztof Kozlowski
2021-12-16 7:04 ` Chanwoo Choi [this message]
2021-12-15 16:09 ` [PATCH 3/7] dt-bindings: Add vendor prefix for WinLink Sam Protsenko
2021-12-16 20:24 ` Rob Herring
2021-12-15 16:09 ` [PATCH 4/7] dt-bindings: arm: samsung: Document E850-96 board binding Sam Protsenko
2021-12-15 16:14 ` Krzysztof Kozlowski
2021-12-15 16:22 ` Krzysztof Kozlowski
2021-12-15 16:09 ` [PATCH 5/7] dt-bindings: pinctrl: samsung: Add pin drive definitions for Exynos850 Sam Protsenko
2021-12-16 20:25 ` Rob Herring
2021-12-15 16:09 ` [PATCH 6/7] arm64: dts: exynos: Add initial Exynos850 SoC support Sam Protsenko
2021-12-15 16:47 ` Krzysztof Kozlowski
2021-12-16 19:40 ` Sam Protsenko
2021-12-17 8:21 ` Krzysztof Kozlowski
2021-12-17 15:56 ` Sam Protsenko
2021-12-17 3:13 ` Chanho Park
2021-12-17 15:54 ` Sam Protsenko
2021-12-17 16:46 ` Alim Akhtar
2021-12-18 10:37 ` Krzysztof Kozlowski
2021-12-15 16:09 ` [PATCH 7/7] arm64: dts: exynos: Add initial E850-96 board support Sam Protsenko
2021-12-15 17:01 ` Krzysztof Kozlowski
2021-12-16 23:39 ` Sam Protsenko
2021-12-15 17:04 ` Krzysztof Kozlowski
2021-12-17 0:49 ` Sam Protsenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=31bbb0a6-0b46-b195-2376-a92a04666f0a@samsung.com \
--to=cw00.choi@samsung.com \
--cc=chanho61.park@samsung.com \
--cc=daniel@0x0f.com \
--cc=devicetree@vger.kernel.org \
--cc=jaewon02.kim@samsung.com \
--cc=krzysztof.kozlowski@canonical.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=s.nawrocki@samsung.com \
--cc=sboyd@kernel.org \
--cc=semen.protsenko@linaro.org \
--cc=tomasz.figa@gmail.com \
--cc=virag.david003@gmail.com \
--cc=youngmin.nam@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®