[PATCH v3 1/2] scsi: ufs: core: Clear saved errors in ufshcd_link_recovery

[HOYOUNG SEO <hy50.seo@samsung.com>]

ufshcd_link_recovery() resets both the device and the host and then
re-establishes the link. Unlike ufshcd_reset_and_restore(), however, it
does not clear hba->saved_err, hba->saved_uic_err and hba->force_reset,
so the errors latched before the recovery remain pending after the link
has already been recovered.

When ufshcd_err_handler() runs afterwards,
ufshcd_err_handling_should_stop() sees these stale errors. The error
handler then quiesces all queues and, depending on the latched errors
(e.g. a fatal error or UFSHCD_UIC_DL_PA_INIT_ERROR), performs another
full ufshcd_reset_and_restore() on a link that is already operational.

Cache and clear the saved errors before the reset, as
ufshcd_reset_and_restore() does, so that only errors raised during or
after the recovery are left to the error handler. Put them back if the
recovery fails.

Signed-off-by: HOYOUNG SEO <hy50.seo@samsung.com>
---
 drivers/ufs/core/ufshcd.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index bcc2512bf34b..74dfbb98129e 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -4690,10 +4690,20 @@ EXPORT_SYMBOL_GPL(ufshcd_uic_change_pwr_mode);
 
 int ufshcd_link_recovery(struct ufs_hba *hba)
 {
+	u32 saved_err, saved_uic_err;
 	int ret;
 	unsigned long flags;
 
 	spin_lock_irqsave(&hba->host->host_lock, flags);
+	/*
+	 * The errors saved so far are handled by this full reset, so cache and
+	 * clear them first, in case new errors are generated during recovery.
+	 */
+	saved_err = hba->saved_err;
+	saved_uic_err = hba->saved_uic_err;
+	hba->saved_err = 0;
+	hba->saved_uic_err = 0;
+	hba->force_reset = false;
 	hba->ufshcd_state = UFSHCD_STATE_RESET;
 	ufshcd_set_eh_in_progress(hba);
 	spin_unlock_irqrestore(&hba->host->host_lock, flags);
@@ -4704,8 +4714,11 @@ int ufshcd_link_recovery(struct ufs_hba *hba)
 	ret = ufshcd_host_reset_and_restore(hba);
 
 	spin_lock_irqsave(&hba->host->host_lock, flags);
-	if (ret)
+	if (ret) {
 		hba->ufshcd_state = UFSHCD_STATE_ERROR;
+		hba->saved_err |= saved_err;
+		hba->saved_uic_err |= saved_uic_err;
+	}
 	ufshcd_clear_eh_in_progress(hba);
 	spin_unlock_irqrestore(&hba->host->host_lock, flags);
 
-- 
2.34.1