From: "Rafael J. Wysocki" <rjw@rjwysocki.net>
To: linux-scsi@vger.kernel.org
Cc: Alan Stern <stern@rowland.harvard.edu>,
Aaron Lu <aaron.lu@intel.com>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Linux PM list <linux-pm@vger.kernel.org>,
"James E.J. Bottomley" <JBottomley@parallels.com>,
Vinayak Holikatti <vinholikatti@gmail.com>
Subject: [PATCH] SCSI / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
Date: Thu, 04 Dec 2014 02:22:01 +0100 [thread overview]
Message-ID: <3237237.IIIiULdqDt@vostro.rjw.lan> (raw)
From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is
selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks
depending on CONFIG_PM_RUNTIME may now be changed to depend on
CONFIG_PM.
Replace CONFIG_PM_RUNTIME with CONFIG_PM everywhere under
drivers/scsi/ and in include/scsi/scsi_device.h.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
Note: This depends on commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if
PM_SLEEP is selected) which is only in linux-next at the moment (via the
linux-pm tree).
Please let me know if it is OK to take this one into linux-pm.
---
drivers/scsi/scsi_pm.c | 4 ++--
drivers/scsi/scsi_priv.h | 5 ++---
drivers/scsi/ufs/ufshcd-pci.c | 11 ++++-------
drivers/scsi/ufs/ufshcd-pltfrm.c | 11 ++++-------
include/scsi/scsi_device.h | 4 ++--
5 files changed, 14 insertions(+), 21 deletions(-)
Index: linux-pm/include/scsi/scsi_device.h
===================================================================
--- linux-pm.orig/include/scsi/scsi_device.h
+++ linux-pm/include/scsi/scsi_device.h
@@ -440,13 +440,13 @@ static inline int scsi_execute_req(struc
extern void sdev_disable_disk_events(struct scsi_device *sdev);
extern void sdev_enable_disk_events(struct scsi_device *sdev);
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
extern int scsi_autopm_get_device(struct scsi_device *);
extern void scsi_autopm_put_device(struct scsi_device *);
#else
static inline int scsi_autopm_get_device(struct scsi_device *d) { return 0; }
static inline void scsi_autopm_put_device(struct scsi_device *d) {}
-#endif /* CONFIG_PM_RUNTIME */
+#endif /* CONFIG_PM */
static inline int __must_check scsi_device_reprobe(struct scsi_device *sdev)
{
Index: linux-pm/drivers/scsi/scsi_priv.h
===================================================================
--- linux-pm.orig/drivers/scsi/scsi_priv.h
+++ linux-pm/drivers/scsi/scsi_priv.h
@@ -157,8 +157,7 @@ static inline void scsi_netlink_exit(voi
/* scsi_pm.c */
#ifdef CONFIG_PM
extern const struct dev_pm_ops scsi_bus_pm_ops;
-#endif
-#ifdef CONFIG_PM_RUNTIME
+
extern void scsi_autopm_get_target(struct scsi_target *);
extern void scsi_autopm_put_target(struct scsi_target *);
extern int scsi_autopm_get_host(struct Scsi_Host *);
@@ -168,7 +167,7 @@ static inline void scsi_autopm_get_targe
static inline void scsi_autopm_put_target(struct scsi_target *t) {}
static inline int scsi_autopm_get_host(struct Scsi_Host *h) { return 0; }
static inline void scsi_autopm_put_host(struct Scsi_Host *h) {}
-#endif /* CONFIG_PM_RUNTIME */
+#endif /* CONFIG_PM */
extern struct async_domain scsi_sd_pm_domain;
extern struct async_domain scsi_sd_probe_domain;
Index: linux-pm/drivers/scsi/scsi_pm.c
===================================================================
--- linux-pm.orig/drivers/scsi/scsi_pm.c
+++ linux-pm/drivers/scsi/scsi_pm.c
@@ -213,7 +213,7 @@ static int scsi_bus_restore(struct devic
#endif /* CONFIG_PM_SLEEP */
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int sdev_runtime_suspend(struct device *dev)
{
@@ -338,7 +338,7 @@ void scsi_autopm_put_host(struct Scsi_Ho
#define scsi_runtime_resume NULL
#define scsi_runtime_idle NULL
-#endif /* CONFIG_PM_RUNTIME */
+#endif /* CONFIG_PM */
const struct dev_pm_ops scsi_bus_pm_ops = {
.prepare = scsi_bus_prepare,
Index: linux-pm/drivers/scsi/ufs/ufshcd-pci.c
===================================================================
--- linux-pm.orig/drivers/scsi/ufs/ufshcd-pci.c
+++ linux-pm/drivers/scsi/ufs/ufshcd-pci.c
@@ -62,12 +62,7 @@ static int ufshcd_pci_resume(struct devi
{
return ufshcd_system_resume(dev_get_drvdata(dev));
}
-#else
-#define ufshcd_pci_suspend NULL
-#define ufshcd_pci_resume NULL
-#endif /* CONFIG_PM */
-#ifdef CONFIG_PM_RUNTIME
static int ufshcd_pci_runtime_suspend(struct device *dev)
{
return ufshcd_runtime_suspend(dev_get_drvdata(dev));
@@ -80,11 +75,13 @@ static int ufshcd_pci_runtime_idle(struc
{
return ufshcd_runtime_idle(dev_get_drvdata(dev));
}
-#else /* !CONFIG_PM_RUNTIME */
+#else /* !CONFIG_PM */
+#define ufshcd_pci_suspend NULL
+#define ufshcd_pci_resume NULL
#define ufshcd_pci_runtime_suspend NULL
#define ufshcd_pci_runtime_resume NULL
#define ufshcd_pci_runtime_idle NULL
-#endif /* CONFIG_PM_RUNTIME */
+#endif /* CONFIG_PM */
/**
* ufshcd_pci_shutdown - main function to put the controller in reset state
Index: linux-pm/drivers/scsi/ufs/ufshcd-pltfrm.c
===================================================================
--- linux-pm.orig/drivers/scsi/ufs/ufshcd-pltfrm.c
+++ linux-pm/drivers/scsi/ufs/ufshcd-pltfrm.c
@@ -266,12 +266,7 @@ static int ufshcd_pltfrm_resume(struct d
{
return ufshcd_system_resume(dev_get_drvdata(dev));
}
-#else
-#define ufshcd_pltfrm_suspend NULL
-#define ufshcd_pltfrm_resume NULL
-#endif
-#ifdef CONFIG_PM_RUNTIME
static int ufshcd_pltfrm_runtime_suspend(struct device *dev)
{
return ufshcd_runtime_suspend(dev_get_drvdata(dev));
@@ -284,11 +279,13 @@ static int ufshcd_pltfrm_runtime_idle(st
{
return ufshcd_runtime_idle(dev_get_drvdata(dev));
}
-#else /* !CONFIG_PM_RUNTIME */
+#else /* !CONFIG_PM */
+#define ufshcd_pltfrm_suspend NULL
+#define ufshcd_pltfrm_resume NULL
#define ufshcd_pltfrm_runtime_suspend NULL
#define ufshcd_pltfrm_runtime_resume NULL
#define ufshcd_pltfrm_runtime_idle NULL
-#endif /* CONFIG_PM_RUNTIME */
+#endif /* CONFIG_PM */
static void ufshcd_pltfrm_shutdown(struct platform_device *pdev)
{
next reply other threads:[~2014-12-04 1:00 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-04 1:22 Rafael J. Wysocki [this message]
2014-12-09 6:19 ` Aaron Lu
2014-12-09 21:26 ` Rafael J. Wysocki
2014-12-09 21:47 ` [Update][PATCH] " Rafael J. Wysocki
2014-12-10 1:43 ` Aaron Lu
2014-12-15 8:22 ` Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3237237.IIIiULdqDt@vostro.rjw.lan \
--to=rjw@rjwysocki.net \
--cc=JBottomley@parallels.com \
--cc=aaron.lu@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=stern@rowland.harvard.edu \
--cc=vinholikatti@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®