Re: [PATCH v10 3/5] amba: Don't unprepare the clocks if device driver wants IRQ safe runtime PM

["Rafael J. Wysocki" <rjw@rjwysocki.net>]

On Thursday, November 06, 2014 09:36:48 AM Krzysztof Kozlowski wrote:
> The AMBA bus driver defines runtime Power Management functions which
> disable and unprepare AMBA bus clock. This is problematic for runtime PM
> because unpreparing a clock might sleep so it is not interrupt safe.
> 
> However some drivers may want to implement runtime PM functions in
> interrupt-safe way (see pm_runtime_irq_safe()). In such case the AMBA
> bus driver should only disable/enable the clock in runtime suspend and
> resume callbacks.
> 
> Detect the device driver behavior during runtime suspend. During runtime
> resume deal with clocks according to stored value.
> 
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> ---
>  drivers/amba/bus.c       | 17 +++++++++++++----
>  include/linux/amba/bus.h |  1 +
>  2 files changed, 14 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
> index 47bbdc1b5be3..356f906c6966 100644
> --- a/drivers/amba/bus.c
> +++ b/drivers/amba/bus.c
> @@ -95,8 +95,14 @@ static int amba_pm_runtime_suspend(struct device *dev)
>  	struct amba_device *pcdev = to_amba_device(dev);
>  	int ret = pm_generic_runtime_suspend(dev);
>  
> -	if (ret == 0 && dev->driver)
> -		clk_disable_unprepare(pcdev->pclk);
> +	if (ret == 0 && dev->driver) {
> +		pcdev->irq_safe = dev->power.irq_safe;
> +
> +		if (pcdev->irq_safe)
> +			clk_disable(pcdev->pclk);
> +		else
> +			clk_disable_unprepare(pcdev->pclk);
> +	}
>  
>  	return ret;
>  }
> @@ -107,7 +113,10 @@ static int amba_pm_runtime_resume(struct device *dev)
>  	int ret;
>  
>  	if (dev->driver) {
> -		ret = clk_prepare_enable(pcdev->pclk);
> +		if (pcdev->irq_safe)
> +			ret = clk_enable(pcdev->pclk);
> +		else
> +			ret = clk_prepare_enable(pcdev->pclk);
>  		/* Failure is probably fatal to the system, but... */
>  		if (ret)
>  			return ret;
> @@ -115,7 +124,7 @@ static int amba_pm_runtime_resume(struct device *dev)
>  
>  	return pm_generic_runtime_resume(dev);
>  }
> -#endif
> +#endif /* CONFIG_PM */
>  
>  static const struct dev_pm_ops amba_pm = {
>  	.suspend	= pm_generic_suspend,
> diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h
> index ac02f9bd63dc..c4bae79851fb 100644
> --- a/include/linux/amba/bus.h
> +++ b/include/linux/amba/bus.h
> @@ -32,6 +32,7 @@ struct amba_device {
>  	struct clk		*pclk;
>  	unsigned int		periphid;
>  	unsigned int		irq[AMBA_NR_IRQS];
> +	unsigned int		irq_safe:1;

Why do we need the new flag?  Seems redundant to me.

>  };
>  
>  struct amba_driver {
> 

-- 
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.