Re: [PATCH 3/3] arm64: dts: freescale: add i.MX95 19x19 EVK minimal board dts

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 18/02/2024 07:38, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
> 
> Add a minimal dts for i.MX95 19x19 EVK board:
>  - lpuart1 as console
>  - sdhc1/2 as storage
> 
> As of now, because scmi pinctrl support not ready, so count on
> bootloader to set the pinctrl.
> 
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/Makefile            |  1 +
>  arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts | 88 +++++++++++++++++++++++
>  2 files changed, 89 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 518149d295a1..c830ff88f5f8 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -209,6 +209,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx93-var-som-symphony.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk.dtb
>  
>  imx8mm-venice-gw72xx-0x-imx219-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-imx219.dtbo
>  imx8mm-venice-gw72xx-0x-rpidsi-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rpidsi.dtbo
> diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
> new file mode 100644
> index 000000000000..9640f3b49e63
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
> @@ -0,0 +1,88 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright 2024 NXP
> + */
> +
> +/dts-v1/;
> +
> +#include "imx95.dtsi"
> +
> +/ {
> +	model = "NXP i.MX95 19X19 board";
> +	compatible = "fsl,imx95-19x19-evk", "fsl,imx95";

It does not look like you tested the DTS against bindings. Please run
`make dtbs_check W=1` (see
Documentation/devicetree/bindings/writing-schema.rst or
https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
for instructions).


Really, test your patches before sending.

Best regards,
Krzysztof