From: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
To: Krzysztof Kozlowski <krzk@kernel.org>, <ath12k@lists.infradead.org>
Cc: <linux-wireless@vger.kernel.org>, Kalle Valo <kvalo@kernel.org>,
"Rob Herring" <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
Jeff Johnson <jjohnson@kernel.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
Balamurugan S <quic_bselvara@quicinc.com>,
P Praneesh <quic_ppranees@quicinc.com>
Subject: Re: [PATCH v4 08/13] wifi: ath12k: add AHB driver support for IPQ5332
Date: Wed, 29 Jan 2025 23:58:55 +0530 [thread overview]
Message-ID: <329fd3ef-5385-47e9-9e5b-875488cf9766@quicinc.com> (raw)
In-Reply-To: <42feceb8-512a-4be3-aefa-116bbde000c1@kernel.org>
On 12/10/2024 8:17 PM, Krzysztof Kozlowski wrote:
> On 10/12/2024 08:41, Raj Kumar Bhagat wrote:
>> From: Balamurugan S <quic_bselvara@quicinc.com>
>>
>> Add Initial Ath12k AHB driver support for IPQ5332. IPQ5332 is AHB
>> based IEEE802.11be 2 GHz 2x2 WiFi device.
>>
>> Tested-on: IPQ5332 hw1.0 AHB WLAN.WBE.1.3.1-00130-QCAHKSWPL_SILICONZ-1
>> Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00210-QCAHKSWPL_SILICONZ-1
>>
>> Signed-off-by: Balamurugan S <quic_bselvara@quicinc.com>
>> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com>
>> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
>> Co-developed-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
>> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
>> ---
>> drivers/net/wireless/ath/ath12k/ahb.c | 878 +++++++++++++++++++++++++
>> drivers/net/wireless/ath/ath12k/ahb.h | 37 ++
>> drivers/net/wireless/ath/ath12k/core.h | 4 +
>> drivers/net/wireless/ath/ath12k/hal.h | 1 +
>> drivers/net/wireless/ath/ath12k/hw.h | 1 +
>> 5 files changed, 921 insertions(+)
>> create mode 100644 drivers/net/wireless/ath/ath12k/ahb.c
>> create mode 100644 drivers/net/wireless/ath/ath12k/ahb.h
>>
>> diff --git a/drivers/net/wireless/ath/ath12k/ahb.c b/drivers/net/wireless/ath/ath12k/ahb.c
>> new file mode 100644
>> index 000000000000..fcd949faea9f
>> --- /dev/null
>> +++ b/drivers/net/wireless/ath/ath12k/ahb.c
>> @@ -0,0 +1,878 @@
>> +// SPDX-License-Identifier: BSD-3-Clause-Clear
>> +/*
>> + * Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
>> + * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +#include <linux/dma-mapping.h>
>> +#include <linux/iommu.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>
> You don't use this header.
>
>> +#include <linux/of_device.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/remoteproc.h>
>
> More headers here look unused.
>
sure, will remove unused headers in next version.
>> +#include <linux/soc/qcom/smem.h>
>> +#include <linux/soc/qcom/smem_state.h>
>> +#include "ahb.h"
>> +#include "debug.h"
>> +#include "hif.h"
>> +
>> +static const struct of_device_id ath12k_ahb_of_match[] = {
>> + { .compatible = "qcom,ipq5332-wifi",
>> + .data = (void *)ATH12K_HW_IPQ5332_HW10,
>> + },
>> + { }
>> +};
>> +
>> +MODULE_DEVICE_TABLE(of, ath12k_ahb_of_match);
>
> This goes to driver struct declaration. It is really unusual to see it
> in some other places.
>
>
>> +
>> +#define ATH12K_IRQ_CE0_OFFSET 4
>> +
>
>
> ...
>
>> +
>> +static int ath12k_ahb_probe(struct platform_device *pdev)
>> +{
>> + struct ath12k_base *ab;
>> + const struct ath12k_hif_ops *hif_ops;
>> + struct device_node *mem_node;
>> + enum ath12k_hw_rev hw_rev;
>> + u32 addr;
>> + int ret;
>> +
>> + hw_rev = ath12k_ahb_get_hw_rev(pdev);
>> + switch (hw_rev) {
>> + case ATH12K_HW_IPQ5332_HW10:
>> + hif_ops = &ath12k_ahb_hif_ops_ipq5332;
>> + break;
>> + default:
>> + dev_err(&pdev->dev, "Unsupported device type %d\n", hw_rev);
>
> You already print once in ath12k_ahb_get_hw_rev() and none of these can
> happen. No need to print impossible conditions at all. No need to print
> impossible things twice.
>
sure, will drop this print.
>> + return -EOPNOTSUPP;
>> + }
>> +
>
>> + ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
>> + if (ret) {
>> + dev_err(&pdev->dev, "Failed to set 32-bit coherent dma\n");
>> + return ret;
>> + }
>> +
>> + ab = ath12k_core_alloc(&pdev->dev, sizeof(struct ath12k_ahb),
>> + ATH12K_BUS_AHB);
>> + if (!ab) {
>> + dev_err(&pdev->dev, "failed to allocate ath12k base\n");
>> + return -ENOMEM;
>> + }
>> +
>> + ab->hif.ops = hif_ops;
>> + ab->pdev = pdev;
>> + ab->hw_rev = hw_rev;
>> + platform_set_drvdata(pdev, ab);
>> +
>> + /* Set fixed_mem_region to true for platforms that support fixed memory
>> + * reservation from DT. If memory is reserved from DT for FW, ath12k driver
>> + * need not to allocate memory.
>> + */
>> + if (!of_property_read_u32(ab->dev->of_node, "memory-region", &addr)) {
>> + set_bit(ATH12K_FLAG_FIXED_MEM_REGION, &ab->dev_flags);
>> +
>> + /* If the platform supports fixed memory, then it should define/
>> + * reserve MLO global memory in DT to support Multi Link Operation
>> + * (IEEE 802.11be).
>> + * If MLO global memory is not reserved in fixed memory mode, then
>> + * MLO cannot be supported.
>> + */
>> + mem_node = of_find_node_by_name(NULL, "mlo_global_mem_0");
>
> NAK. Incorrect name, not conforming to coding style. Undocumented ABI.
>
> Drop all calls to of_find_node_by_name() or any other stuff like this.
>
Sure, will remove all calls to - of_find_node_by_name()
>> + if (!mem_node)
>> + ab->single_chip_mlo_supp = false;
>> + }
>> +
>> + ret = ath12k_core_pre_init(ab);
>> + if (ret)
>> + goto err_core_free;
>
> Best regards,
> Krzysztof
next prev parent reply other threads:[~2025-01-29 18:29 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-10 7:41 [PATCH v4 00/13] wifi: ath12k: add Ath12k " Raj Kumar Bhagat
2024-12-10 7:41 ` [PATCH v4 01/13] dt-bindings: net: wireless: describe the ath12k AHB module Raj Kumar Bhagat
2024-12-10 7:41 ` [PATCH v4 02/13] wifi: ath12k: fix incorrect CE addresses Raj Kumar Bhagat
2024-12-10 7:41 ` [PATCH v4 03/13] wifi: ath12k: refactor ath12k_hw_regs structure Raj Kumar Bhagat
2024-12-10 7:41 ` [PATCH v4 04/13] wifi: ath12k: add ath12k_hw_params for IPQ5332 Raj Kumar Bhagat
2024-12-10 7:41 ` [PATCH v4 05/13] wifi: ath12k: avoid m3 firmware download in AHB device IPQ5332 Raj Kumar Bhagat
2024-12-10 7:41 ` [PATCH v4 06/13] wifi: ath12k: Add hw_params to remap CE register space for IPQ5332 Raj Kumar Bhagat
2024-12-10 7:41 ` [PATCH v4 07/13] wifi: ath12k: add support for fixed QMI firmware memory Raj Kumar Bhagat
2024-12-10 14:43 ` Krzysztof Kozlowski
2024-12-10 17:00 ` Raj Kumar Bhagat
2024-12-11 8:52 ` Krzysztof Kozlowski
2024-12-10 7:41 ` [PATCH v4 08/13] wifi: ath12k: add AHB driver support for IPQ5332 Raj Kumar Bhagat
2024-12-10 14:47 ` Krzysztof Kozlowski
2025-01-29 18:28 ` Raj Kumar Bhagat [this message]
2024-12-10 7:41 ` [PATCH v4 09/13] wifi: ath12k: Power up root PD Raj Kumar Bhagat
2024-12-10 14:50 ` Krzysztof Kozlowski
2025-01-29 18:32 ` Raj Kumar Bhagat
2024-12-10 7:41 ` [PATCH v4 10/13] wifi: ath12k: Register various userPD interrupts and save SMEM entries Raj Kumar Bhagat
2024-12-10 7:41 ` [PATCH v4 11/13] wifi: ath12k: Power up userPD Raj Kumar Bhagat
2024-12-10 14:52 ` Krzysztof Kozlowski
2025-01-29 18:34 ` Raj Kumar Bhagat
2024-12-10 7:41 ` [PATCH v4 12/13] wifi: ath12k: Power down userPD Raj Kumar Bhagat
2024-12-10 7:41 ` [PATCH v4 13/13] wifi: ath12k: enable ath12k AHB support Raj Kumar Bhagat
2024-12-10 15:08 ` [PATCH v4 00/13] wifi: ath12k: add Ath12k AHB driver support for IPQ5332 Krzysztof Kozlowski
2024-12-10 15:12 ` Krzysztof Kozlowski
2025-01-28 9:16 ` Raj Kumar Bhagat
2025-01-28 9:20 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=329fd3ef-5385-47e9-9e5b-875488cf9766@quicinc.com \
--to=quic_rajkbhag@quicinc.com \
--cc=ath12k@lists.infradead.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jjohnson@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=krzk@kernel.org \
--cc=kvalo@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=quic_bselvara@quicinc.com \
--cc=quic_ppranees@quicinc.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®