From: "jiale yao" <19888972804@163.com>
To: "Niklas Söderlund" <niklas.soderlund@ragnatech.se>
Cc: "Paul Barker" <paul@pbarker.dev>,
"Andrew Lunn" <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
"Eric Dumazet" <edumazet@google.com>,
"Jakub Kicinski" <kuba@kernel.org>,
"Paolo Abeni" <pabeni@redhat.com>,
"Sergei Shtylyov" <sergei.shtylyov@cogentembedded.com>,
"Mitsuhiro Kimura" <mitsuhiro.kimura.kc@renesas.com>,
"Claudiu Beznea" <claudiu.beznea.uj@bp.renesas.com>,
"Sergey Shtylyov" <s.shtylyov@omp.ru>,
netdev@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
linux-kernel@vger.kernel.org, stable@vger.kernel.org
Subject: Re:Re: [PATCH v2 6/7] net: ravb: fix resource teardown ordering
Date: Mon, 28 Sep 2026 17:33:29 +0800 (CST) [thread overview]
Message-ID: <32efc762.8cd6.1a0e75cbd49.Coremail.19888972804@163.com> (raw)
In-Reply-To: <20260927160134.GI1099675@ragnatech.se>
Hi,
At 2026-09-28 00:01:34, "Niklas Söderlund" <niklas.soderlund@ragnatech.se> wrote:
>Hi Jiale,
>
>On 2026-09-27 22:47:39 +0800, Jiale Yao wrote:
>> ravb_remove() frees the netdev before devres releases the managed IRQs.
>> The handlers use the netdev as their data pointer, so an interrupt during
>> that window can access freed memory. Probe error paths have the same
>> ordering problem.
>>
>> The remove callback also returns when runtime resume fails. That leaves
>> the netdev registered while the driver core still releases its managed
>> resources. A running interface already holds a runtime PM reference, so
>> the extra get cannot invoke a failing resume. A resume failure therefore
>> occurs while the interface is down and ndo_stop() will not be called.
>>
>> Place the IRQ resources in a dedicated devres group and release it before
>> freeing the netdev. Continue unregistering and freeing software resources
>> when runtime resume fails, but skip the unmatched runtime PM put.
>
>Would it not make more sens to rework the driver to allocate the ndev
>using devm too instead of adding a complex devres group? AFIK
>s/alloc_etherdev_mqs/devm_alloc_etherdev_mqs/ would allocate the ndev
>with devm too?
You are right, I made things complicated. I will rework the ravb patch and
drop the devres group.
>
>>
>> Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
>> Fixes: 48f894ab07c4 ("net: ravb: Add runtime PM support")
>> Cc: stable@vger.kernel.org
>> Signed-off-by: Jiale Yao <yaojiale02@163.com>
>> ---
>> drivers/net/ethernet/renesas/ravb_main.c | 23 +++++++++++++++++------
>> 1 file changed, 17 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
>> index ea1c7e536791..a25f5ac7062f 100644
>> --- a/drivers/net/ethernet/renesas/ravb_main.c
>> +++ b/drivers/net/ethernet/renesas/ravb_main.c
>> @@ -2963,28 +2963,35 @@ static int ravb_probe(struct platform_device *pdev)
>> priv->num_rx_ring[RAVB_NC] = NC_RX_RING_SIZE;
>> }
>>
>> + if (!devres_open_group(&pdev->dev, priv, GFP_KERNEL)) {
>> + error = -ENOMEM;
>> + goto out_reset_assert;
>> + }
>> +
>> error = ravb_setup_irqs(priv);
>> if (error)
>> - goto out_reset_assert;
>> + goto out_release_irqs;
>> +
>> + devres_close_group(&pdev->dev, priv);
>>
>> priv->clk = devm_clk_get(&pdev->dev, NULL);
>> if (IS_ERR(priv->clk)) {
>> error = PTR_ERR(priv->clk);
>> - goto out_reset_assert;
>> + goto out_release_irqs;
>> }
>>
>> if (info->gptp_ref_clk) {
>> priv->gptp_clk = devm_clk_get(&pdev->dev, "gptp");
>> if (IS_ERR(priv->gptp_clk)) {
>> error = PTR_ERR(priv->gptp_clk);
>> - goto out_reset_assert;
>> + goto out_release_irqs;
>> }
>> }
>>
>> priv->refclk = devm_clk_get_optional(&pdev->dev, "refclk");
>> if (IS_ERR(priv->refclk)) {
>> error = PTR_ERR(priv->refclk);
>> - goto out_reset_assert;
>> + goto out_release_irqs;
>> }
>> clk_prepare(priv->refclk);
>>
>> @@ -3124,6 +3131,8 @@ static int ravb_probe(struct platform_device *pdev)
>> pm_runtime_disable(&pdev->dev);
>> pm_runtime_dont_use_autosuspend(&pdev->dev);
>> clk_unprepare(priv->refclk);
>> +out_release_irqs:
>> + devres_release_group(&pdev->dev, priv);
>> out_reset_assert:
>> reset_control_assert(rstc);
>> out_free_netdev:
>> @@ -3141,9 +3150,10 @@ static void ravb_remove(struct platform_device *pdev)
>>
>> error = pm_runtime_resume_and_get(dev);
>> if (error < 0)
>> - return;
>> + dev_warn(dev, "failed to resume device: %d\n", error);
>>
>> unregister_netdev(ndev);
>> + devres_release_group(dev, priv);
>> if (info->nc_queues)
>> netif_napi_del(&priv->napi[RAVB_NC]);
>> netif_napi_del(&priv->napi[RAVB_BE]);
>> @@ -3153,7 +3163,8 @@ static void ravb_remove(struct platform_device *pdev)
>> dma_free_coherent(ndev->dev.parent, priv->desc_bat_size, priv->desc_bat,
>> priv->desc_bat_dma);
>>
>> - pm_runtime_put_sync_suspend(&pdev->dev);
>> + if (error >= 0)
>> + pm_runtime_put_sync_suspend(&pdev->dev);
>> pm_runtime_disable(&pdev->dev);
>> pm_runtime_dont_use_autosuspend(dev);
>> clk_unprepare(priv->refclk);
>> --
>> 2.34.1
>>
>
>--
>Kind Regards,
>Niklas Söderlund
next prev parent reply other threads:[~2026-09-28 9:34 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-27 14:47 [PATCH v2 0/7] net: ethernet: release managed IRQs before freeing netdevs Jiale Yao
2026-09-27 14:47 ` [PATCH v2 1/7] net: macb: manage the netdev lifetime with devres Jiale Yao
2026-09-27 14:47 ` [PATCH v2 2/7] net: fec: " Jiale Yao
2026-09-28 2:57 ` Wei Fang
2026-09-27 14:47 ` [PATCH v2 3/7] net: hip04: " Jiale Yao
2026-09-27 14:47 ` [PATCH v2 4/7] net: hisi_femac: " Jiale Yao
2026-09-27 14:47 ` [PATCH v2 5/7] net: hix5hd2: " Jiale Yao
2026-09-27 14:47 ` [PATCH v2 6/7] net: ravb: fix resource teardown ordering Jiale Yao
2026-09-27 16:01 ` Niklas Söderlund
2026-09-28 9:33 ` jiale yao [this message]
2026-09-27 14:47 ` [PATCH v2 7/7] net: sxgbe: manage IRQ data lifetimes with devres Jiale Yao
2026-09-27 22:30 ` [PATCH v2 0/7] net: ethernet: release managed IRQs before freeing netdevs Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=32efc762.8cd6.1a0e75cbd49.Coremail.19888972804@163.com \
--to=19888972804@163.com \
--cc=andrew+netdev@lunn.ch \
--cc=claudiu.beznea.uj@bp.renesas.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=mitsuhiro.kimura.kc@renesas.com \
--cc=netdev@vger.kernel.org \
--cc=niklas.soderlund@ragnatech.se \
--cc=pabeni@redhat.com \
--cc=paul@pbarker.dev \
--cc=s.shtylyov@omp.ru \
--cc=sergei.shtylyov@cogentembedded.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®