Re: [PATCH v6 2/3] arm64: dts: qcom: sc7280: Add lpass cpu node

[Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>]

On 4/6/2022 4:55 AM, Matthias Kaehlcke wrote:
Thanks for your time Matthias!!!
> On Tue, Apr 05, 2022 at 04:43:39PM +0530, Srinivasa Rao Mandadapu wrote:
>> Add lpass cpu node for audio on sc7280 based platforms.
>>
>> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
>> Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
>> Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
>> ---
>>   arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 28 ++++++++++++++
>>   arch/arm64/boot/dts/qcom/sc7280.dtsi     | 63 ++++++++++++++++++++++++++++++++
>>   2 files changed, 91 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
>> index 83c76b2..e3d8cbf 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
>> @@ -273,6 +273,34 @@
>>   	modem-init;
>>   };
>>   
>> +&lpass_cpu {
>> +	status = "okay";
>> +
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&sec_mi2s_data0>, <&sec_mi2s_sclk>, <&sec_mi2s_ws>;
>> +
>> +	mi2s-secondary@1 {
> in line with an earlier comment, the primary/secondary terminology seem to
> reflect how things are called in the datasheet (which only talks about a
> primary/secondary master clock, otherwise about mi2sN). How about calling
> these nodes 'dai-link@N' as in the binding (and a bunch of other
> boards/SoCs)?
Okay. will change accordingly.
>
>> +		reg = <MI2S_SECONDARY>;
>> +		qcom,playback-sd-lines = <0>;
>> +	};
>> +
>> +	hdmi-primary@5 {
>> +		reg = <LPASS_DP_RX>;
>> +	};
>> +
>> +	wcd-rx@6 {
>> +		reg = <LPASS_CDC_DMA_RX0>;
>> +	};
>> +
>> +	wcd-tx@19 {
>> +		reg = <LPASS_CDC_DMA_TX3>;
>> +	};
>> +
>> +	va-tx@25 {
>> +		reg = <LPASS_CDC_DMA_VA_TX0>;
>> +	};
>> +};
>> +
>>   &lpass_tlmm {
>>   	dmic01_active: dmic01-active {
>>   		clk {
>> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
>> index 78ec84c..e808d53 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
>> @@ -19,6 +19,7 @@
>>   #include <dt-bindings/reset/qcom,sdm845-aoss.h>
>>   #include <dt-bindings/reset/qcom,sdm845-pdc.h>
>>   #include <dt-bindings/soc/qcom,rpmh-rsc.h>
>> +#include <dt-bindings/sound/qcom,lpass.h>
>>   #include <dt-bindings/thermal/thermal.h>
>>   
>>   / {
>> @@ -2101,6 +2102,68 @@
>>   			#clock-cells = <1>;
>>   		};
>>   
>> +		lpass_cpu: audio@3987000 {
>> +			compatible = "qcom,sc7280-lpass-cpu";
>> +
>> +			reg = <0 0x03987000 0 0x68000>,
>> +			      <0 0x03b00000 0 0x29000>,
>> +			      <0 0x03260000 0 0xc000>,
>> +			      <0 0x03280000 0 0x29000>,
>> +			      <0 0x03340000 0 0x29000>,
>> +			      <0 0x0336c000 0 0x3000>;
>> +
> Drop empty line, 'reg' and 'reg-names' belong together'.
Okay.
>
>> +			reg-names = "lpass-hdmiif",
>> +				    "lpass-lpaif",
>> +				    "lpass-rxtx-cdc-dma-lpm",
>> +				    "lpass-rxtx-lpaif",
>> +				    "lpass-va-lpaif",
>> +				    "lpass-va-cdc-dma-lpm";
>> +
>> +			iommus = <&apps_smmu 0x1820 0>,
>> +				 <&apps_smmu 0x1821 0>,
>> +				 <&apps_smmu 0x1832 0>;
>> +			status = "disabled";
> Detter put this at the end as many other nodes do, rather than
> 'hiding' it inmidst of the hardware description.
Okay. will do accordingly.
>
>> +
>> +			power-domains =	<&rpmhpd SC7280_LCX>;
>> +			power-domain-names = "lcx";
>> +			required-opps = <&rpmhpd_opp_nom>;
>> +
>> +			clocks = <&lpass_aon LPASS_AON_CC_AUDIO_HM_H_CLK>,
>> +				 <&lpass_audiocc LPASS_AUDIO_CC_EXT_MCLK0_CLK>,
>> +				 <&lpasscore LPASS_CORE_CC_SYSNOC_MPORT_CORE_CLK>,
>> +				 <&lpasscore LPASS_CORE_CC_EXT_IF0_IBIT_CLK>,
>> +				 <&lpasscore LPASS_CORE_CC_EXT_IF1_IBIT_CLK>,
>> +				 <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM_CLK>,
>> +				 <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM0_CLK>,
>> +				 <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM1_CLK>,
>> +				 <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM2_CLK>,
>> +				 <&lpass_aon LPASS_AON_CC_VA_MEM0_CLK>;
>> +			clock-names = "aon_cc_audio_hm_h",
>> +				      "audio_cc_ext_mclk0",
>> +				      "core_cc_sysnoc_mport_core",
>> +				      "core_cc_ext_if0_ibit",
>> +				      "core_cc_ext_if1_ibit",
>> +				      "audio_cc_codec_mem",
>> +				      "audio_cc_codec_mem0",
>> +				      "audio_cc_codec_mem1",
>> +				      "audio_cc_codec_mem2",
>> +				      "aon_cc_va_mem0";
>> +
>> +			#sound-dai-cells = <1>;
>> +			#address-cells = <1>;
>> +			#size-cells = <0>;
>> +
>> +			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
>> +
> drop empty line, 'interrupts' and 'interrupt-names' belong together.
Okay.
>
>> +			interrupt-names = "lpass-irq-lpaif",
>> +					  "lpass-irq-hdmi",
>> +					  "lpass-irq-vaif",
>> +					  "lpass-irq-rxtxif";
>> +		};
>> +
>>   		lpass_ag_noc: interconnect@3c40000 {
>>   			reg = <0 0x03c40000 0 0xf080>;
>>   			compatible = "qcom,sc7280-lpass-ag-noc";