[PATCH] mmc fix for clock-off PXA255/270

[rifx <rifx@o2.pl>]

[-- Attachment #1: Type: text/plain, Size: 181 bytes --]

It solves the problems with clock-off in the PXA255/270 MMC/SD hardware.
This solution was testes with our devices and works good.
Kernel 2.6.24.4 (but should work with >=2.6.19).

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: pxamci.c.diff --]
[-- Type: text/x-patch; name="pxamci.c.diff", Size: 1371 bytes --]

diff -NuarBb /x/work/navi_os/mmc/host/pxamci.c mmc/host/pxamci.c
--- /x/work/navi_os/mmc/host/pxamci.c	2008-03-24 19:49:18.000000000 +0100
+++ mmc/host/pxamci.c	2008-04-25 12:14:00.000000000 +0200
@@ -26,6 +26,7 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
 
 #include <asm/dma.h>
 #include <asm/io.h>
@@ -67,6 +68,8 @@
 	unsigned int		dma_dir;
 };
 
+static int local_cmd = -1;
+
 static void pxamci_stop_clock(struct pxamci_host *host)
 {
 	if (readl(host->base + MMC_STAT) & STAT_CLK_EN) {
@@ -84,6 +87,7 @@
 
 		if (v & STAT_CLK_EN)
 			dev_err(mmc_dev(host->mmc), "unable to stop clock\n");
+		local_cmd = -1;
 	}
 }
 
@@ -232,6 +235,14 @@
 		v = w2;
 	}
 
+	local_cmd = cmd->opcode;
+	if ((local_cmd == MMC_GO_IDLE_STATE) ||
+	    (local_cmd == MMC_GO_INACTIVE_STATE) ||
+	    (local_cmd == MMC_SEND_STATUS) ||
+	    (local_cmd == MMC_STOP_TRANSMISSION) ||
+	    (local_cmd == MMC_SET_BLOCKLEN)
+	    ) pxamci_stop_clock(host);
+
 	if (stat & STAT_TIME_OUT_RESPONSE) {
 		cmd->error = -ETIMEDOUT;
 	} else if (stat & STAT_RES_CRC_ERR && cmd->flags & MMC_RSP_CRC) {
@@ -290,7 +301,7 @@
 
 	host->data = NULL;
 	if (host->mrq->stop) {
-		pxamci_stop_clock(host);
+		//pxamci_stop_clock(host);
 		pxamci_start_cmd(host, host->mrq->stop, host->cmdat);
 	} else {
 		pxamci_finish_request(host, host->mrq);