mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Nickhu <nickhu@andestech.com>
To: <greentime@andestech.com>, <linux-kernel@vger.kernel.org>,
	<arnd@arndb.de>, <deanbo422@gmail.com>, <zong@andestech.com>,
	<ebiederm@xmission.com>
Cc: Nickhu <nickhu@andestech.com>, <green.hu@gmail.com>
Subject: [PATCH 1/3] nds32: Fix instruction simulator bug for unaligned access handler.
Date: Thu, 18 Oct 2018 16:34:32 +0800	[thread overview]
Message-ID: <342d2fa512844702edca74f048fcb99b1710e034.1539654056.git.nickhu@andestech.com> (raw)
In-Reply-To: <cover.1539654056.git.nickhu@andestech.com>

	When emulating the 16 bits instructions, the mapping of general
purpose registers is not the same as 32 bits instructions.

	Example:
		'LWI450 r16, [r15]' 16-bit instruction will be decoded as
'1011010110001110', the target register field is decode as index=12.

    But the index of target register should be 16. So the mapping of
register in unaligned access handler is wrong.

Signed-off-by: Nickhu <nickhu@andestech.com>
---
 arch/nds32/mm/alignment.c | 37 +++++++++++++++++++++----------------
 1 file changed, 21 insertions(+), 16 deletions(-)

diff --git a/arch/nds32/mm/alignment.c b/arch/nds32/mm/alignment.c
index e1aed9dc692d..66a556befd05 100644
--- a/arch/nds32/mm/alignment.c
+++ b/arch/nds32/mm/alignment.c
@@ -152,12 +152,16 @@ extern int va_writable(struct pt_regs *regs, unsigned long addr);
 
 int unalign_access_mode = 0, unalign_access_debug = 0;
 
-static inline unsigned long *idx_to_addr(struct pt_regs *regs, int idx)
+static inline unsigned long *idx_to_addr(struct pt_regs *regs, int idx,
+				int idx_mode)
 {
 	/* this should be consistent with ptrace.h */
-	if (idx >= 0 && idx <= 25)	/* R0-R25 */
-		return &regs->uregs[0] + idx;
-	else if (idx >= 28 && idx <= 30)	/* FP, GP, LP */
+	if (idx >= 0 && idx <= 25) {	/* R0-R25 */
+		if (idx_mode == 4 && idx > 11)
+			return &regs->uregs[0] + idx + 4;
+		else
+			return &regs->uregs[0] + idx;
+	} else if (idx >= 28 && idx <= 30)	/* FP, GP, LP */
 		return &regs->fp + (idx - 28);
 	else if (idx == 31)	/* SP */
 		return &regs->sp;
@@ -270,10 +274,10 @@ static inline int do_16(unsigned long inst, struct pt_regs *regs)
 	}
 
 	if (addr_mode == 3) {
-		unaligned_addr = *idx_to_addr(regs, RA3(inst));
+		unaligned_addr = *idx_to_addr(regs, RA3(inst), addr_mode);
 		source_idx = RA3(inst);
 	} else {
-		unaligned_addr = *idx_to_addr(regs, RA5(inst));
+		unaligned_addr = *idx_to_addr(regs, RA5(inst), addr_mode);
 		source_idx = RA5(inst);
 	}
 
@@ -293,16 +297,17 @@ static inline int do_16(unsigned long inst, struct pt_regs *regs)
 			return -EACCES;
 
 		get_data(unaligned_addr, &target_val, len);
-		*idx_to_addr(regs, target_idx) = target_val;
+		*idx_to_addr(regs, target_idx, idx_mode) = target_val;
 	} else {
 		if (!access_ok(VERIFY_WRITE, (void *)unaligned_addr, len))
 			return -EACCES;
-		target_val = *idx_to_addr(regs, target_idx);
+		target_val = *idx_to_addr(regs, target_idx, idx_mode);
 		set_data((void *)unaligned_addr, target_val, len);
 	}
 
 	if (!regular)
-		*idx_to_addr(regs, source_idx) = unaligned_addr + shift;
+		*idx_to_addr(regs, source_idx, idx_mode) =
+			unaligned_addr + shift;
 	regs->ipc += 2;
 
 	return 0;
@@ -312,10 +317,10 @@ static inline int do_16(unsigned long inst, struct pt_regs *regs)
 
 static inline int do_32(unsigned long inst, struct pt_regs *regs)
 {
-	int imm, regular, load, len, sign_ext;
+	int imm, regular, load, len, sign_ext, idx_mode = 5;
 	unsigned long unaligned_addr, target_val, shift;
 
-	unaligned_addr = *idx_to_addr(regs, RA(inst));
+	unaligned_addr = *idx_to_addr(regs, RA(inst), idx_mode);
 
 	switch ((inst >> 25) << 1) {
 
@@ -472,7 +477,7 @@ static inline int do_32(unsigned long inst, struct pt_regs *regs)
 	if (imm)
 		shift = GET_IMMSVAL(IMM(inst)) * len;
 	else
-		shift = *idx_to_addr(regs, RB(inst)) << SV(inst);
+		shift = *idx_to_addr(regs, RB(inst), idx_mode) << SV(inst);
 
 	if (regular)
 		unaligned_addr += shift;
@@ -485,21 +490,21 @@ static inline int do_32(unsigned long inst, struct pt_regs *regs)
 		get_data(unaligned_addr, &target_val, len);
 
 		if (sign_ext)
-			*idx_to_addr(regs, RT(inst)) =
+			*idx_to_addr(regs, RT(inst), idx_mode) =
 			    sign_extend(target_val, len);
 		else
-			*idx_to_addr(regs, RT(inst)) = target_val;
+			*idx_to_addr(regs, RT(inst), idx_mode) = target_val;
 	} else {
 
 		if (!access_ok(VERIFY_WRITE, (void *)unaligned_addr, len))
 			return -EACCES;
 
-		target_val = *idx_to_addr(regs, RT(inst));
+		target_val = *idx_to_addr(regs, RT(inst), idx_mode);
 		set_data((void *)unaligned_addr, target_val, len);
 	}
 
 	if (!regular)
-		*idx_to_addr(regs, RA(inst)) = unaligned_addr + shift;
+		*idx_to_addr(regs, RA(inst), idx_mode) = unaligned_addr + shift;
 
 	regs->ipc += 4;
 
-- 
2.17.0


  reply	other threads:[~2018-10-18  8:56 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-18  8:34 [PATCH 0/3] nds32: Unaligned access handler fix Nickhu
2018-10-18  8:34 ` Nickhu [this message]
2018-10-18  8:34 ` [PATCH 2/3] nds32: Add 'HAVE_EFFICIENT_UNALIGNED_ACCESS' config Nickhu
2018-10-18  8:34 ` [PATCH 3/3] nds32: Add unaligned access in kernel space Nickhu
2018-10-19  9:25 ` [PATCH 0/3] nds32: Unaligned access handler fix Greentime Hu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=342d2fa512844702edca74f048fcb99b1710e034.1539654056.git.nickhu@andestech.com \
    --to=nickhu@andestech.com \
    --cc=arnd@arndb.de \
    --cc=deanbo422@gmail.com \
    --cc=ebiederm@xmission.com \
    --cc=green.hu@gmail.com \
    --cc=greentime@andestech.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=zong@andestech.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®