From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
To: Johan Hovold <johan+linaro@kernel.org>, Mark Brown <broonie@kernel.org>
Cc: Banajit Goswami <bgoswami@quicinc.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
alsa-devel@alsa-project.org, linux-sound@vger.kernel.org,
linux-kernel@vger.kernel.org, stable@vger.kernel.org
Subject: Re: [PATCH v3 1/5] ASoC: codecs: wsa883x: fix PA volume control
Date: Fri, 19 Jan 2024 07:14:03 +0000 [thread overview]
Message-ID: <3494d23f-2a56-4f13-a619-e240d208d300@linaro.org> (raw)
In-Reply-To: <20240118165811.13672-2-johan+linaro@kernel.org>
On 18/01/2024 16:58, Johan Hovold wrote:
> The PA gain can be set in steps of 1.5 dB from -3 dB to 18 dB, that is,
> in fifteen levels.
>
> Fix the range of the PA volume control to avoid having the first
> sixteen levels all map to -3 dB.
TBH, we really don't know what unsupported values map to w.r.t dB.
>
> Note that level 0 (-3 dB) does not mute the PA so the mute flag should
> also not be set.
>
> Fixes: cdb09e623143 ("ASoC: codecs: wsa883x: add control, dapm widgets and map")
> Cc: stable@vger.kernel.org # 6.0
> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
> sound/soc/codecs/wsa883x.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/sound/soc/codecs/wsa883x.c b/sound/soc/codecs/wsa883x.c
> index cb83c569e18d..32983ca9afba 100644
> --- a/sound/soc/codecs/wsa883x.c
> +++ b/sound/soc/codecs/wsa883x.c
> @@ -1098,7 +1098,7 @@ static int wsa_dev_mode_put(struct snd_kcontrol *kcontrol,
> return 1;
> }
>
> -static const DECLARE_TLV_DB_SCALE(pa_gain, -300, 150, -300);
> +static const DECLARE_TLV_DB_SCALE(pa_gain, -300, 150, 0);
>
> static int wsa883x_get_swr_port(struct snd_kcontrol *kcontrol,
> struct snd_ctl_elem_value *ucontrol)
> @@ -1239,7 +1239,7 @@ static const struct snd_soc_dapm_widget wsa883x_dapm_widgets[] = {
>
> static const struct snd_kcontrol_new wsa883x_snd_controls[] = {
> SOC_SINGLE_RANGE_TLV("PA Volume", WSA883X_DRE_CTL_1, 1,
> - 0x0, 0x1f, 1, pa_gain),
> + 0x1, 0xf, 1, pa_gain),
gain field in register is Bit[5:1], so the max value of 0x1f is correct
here. However the range of gains that it can actually support is only 0-15.
If we are artificially setting the max value of 0xf here, then somewhere
we should ensure that Bit[5] is set to zero while programming the gain.
Whatever the mixer control is exposing is clearly reflecting what
hardware is supporting.
--srini
> SOC_ENUM_EXT("WSA MODE", wsa_dev_mode_enum,
> wsa_dev_mode_get, wsa_dev_mode_put),
> SOC_SINGLE_EXT("COMP Offset", SND_SOC_NOPM, 0, 4, 0,
next prev parent reply other threads:[~2024-01-19 7:14 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-18 16:58 [PATCH v3 0/5] ASoC: qcom: volume fixes and codec cleanups Johan Hovold
2024-01-18 16:58 ` [PATCH v3 1/5] ASoC: codecs: wsa883x: fix PA volume control Johan Hovold
2024-01-18 17:24 ` Mark Brown
2024-01-19 7:34 ` Johan Hovold
2024-01-19 7:14 ` Srinivas Kandagatla [this message]
2024-01-19 7:49 ` Johan Hovold
2024-01-18 16:58 ` [PATCH v3 2/5] ASoC: codecs: wsa883x: lower default PA gain Johan Hovold
2024-01-18 17:21 ` Mark Brown
2024-01-19 7:57 ` Johan Hovold
2024-01-19 7:15 ` Srinivas Kandagatla
2024-01-19 8:00 ` Johan Hovold
2024-01-18 16:58 ` [PATCH v3 3/5] ASoC: qcom: sc8280xp: limit speaker volumes Johan Hovold
2024-01-19 7:37 ` Srinivas Kandagatla
2024-01-19 8:06 ` Johan Hovold
2024-01-18 16:58 ` [PATCH v3 4/5] ASoC: codecs: lpass-wsa-macro: fix compander volume hack Johan Hovold
2024-01-19 7:45 ` Srinivas Kandagatla
2024-01-19 8:10 ` Johan Hovold
2024-01-18 16:58 ` [PATCH v3 5/5] ASoC: codecs: wcd9335: drop unused gain hack remnant Johan Hovold
2024-01-19 7:46 ` Srinivas Kandagatla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3494d23f-2a56-4f13-a619-e240d208d300@linaro.org \
--to=srinivas.kandagatla@linaro.org \
--cc=alsa-devel@alsa-project.org \
--cc=bgoswami@quicinc.com \
--cc=broonie@kernel.org \
--cc=johan+linaro@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=perex@perex.cz \
--cc=stable@vger.kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®