mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Caleb Connolly <caleb.connolly@linaro.org>
To: Eric Chanudet <echanude@redhat.com>,
	Andy Gross <agross@kernel.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konrad.dybcio@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH] arm64: dts: qcom: sa8540p-ride: enable rtc
Date: Mon, 17 Jul 2023 21:28:15 +0100	[thread overview]
Message-ID: <34a4a052-b76f-b49d-6703-405d65ffd597@linaro.org> (raw)
In-Reply-To: <20230717182351.3389252-1-echanude@redhat.com>



On 17/07/2023 19:23, Eric Chanudet wrote:
> SA8540P-ride is one of the Qualcomm platforms that does not have access
> to UEFI runtime services and on which the RTC registers are read-only,
> as described in:
> https://lore.kernel.org/all/20230202155448.6715-1-johan+linaro@kernel.org/
> 
> Reserve four bytes in one of the PMIC registers to hold the RTC offset
> the same way as it was done for sc8280xp-crd which has similar
> limitations:
>     commit e67b45582c5e ("arm64: dts: qcom: sc8280xp-crd: enable rtc")
> 
> One small difference on SA8540P-ride, the PMIC register bank SDAM6 is
> not writable, so use SDAM7 instead.
> 
> Signed-off-by: Eric Chanudet <echanude@redhat.com>
> ---
>  arch/arm64/boot/dts/qcom/sa8540p-pmics.dtsi | 10 +++++++++-
>  arch/arm64/boot/dts/qcom/sa8540p-ride.dts   | 15 +++++++++++++++
>  2 files changed, 24 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sa8540p-pmics.dtsi b/arch/arm64/boot/dts/qcom/sa8540p-pmics.dtsi
> index 1221be89b3de..9c5dcad35cce 100644
> --- a/arch/arm64/boot/dts/qcom/sa8540p-pmics.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sa8540p-pmics.dtsi
> @@ -14,7 +14,7 @@ pmm8540a: pmic@0 {
>  		#address-cells = <1>;
>  		#size-cells = <0>;
>  
> -		rtc@6000 {
> +		pmm8540a_rtc: rtc@6000 {
>  			compatible = "qcom,pm8941-rtc";
>  			reg = <0x6000>, <0x6100>;
>  			reg-names = "rtc", "alarm";
> @@ -22,6 +22,14 @@ rtc@6000 {
>  			wakeup-source;
>  		};
>  
> +		pmm8540a_sdam_7: nvram@b610 {
Johan disabled the SDAM node in their series for sc8280xp. Unless it's
used on all sa8540p platforms, you should probably also do that here.

			
> +			compatible = "qcom,spmi-sdam";
> +			reg = <0xb610>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges = <0 0xb610 0xb0>;
			status = "disabled";

With that fix,

Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
> +		};
> +
>  		pmm8540a_gpios: gpio@c000 {
>  			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
>  			reg = <0xc000>;
> diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
> index 5a26974dcf8f..608dd71a3f1c 100644
> --- a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
> +++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
> @@ -407,6 +407,21 @@ &pcie3a_phy {
>  	status = "okay";
>  };
>  
> +&pmm8540a_rtc {
> +	nvmem-cells = <&rtc_offset>;
> +	nvmem-cell-names = "offset";
> +
> +	status = "okay";
> +};
> +
> +&pmm8540a_sdam_7 {
> +	status = "okay";> +
> +	rtc_offset: rtc-offset@ac {
> +		reg = <0xac 0x4>;
> +	};
> +};
> +
>  &qup0 {
>  	status = "okay";
>  };

-- 
// Caleb (they/them)

  reply	other threads:[~2023-07-17 20:28 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-07-17 18:23 Eric Chanudet
2023-07-17 20:28 ` Caleb Connolly [this message]
2023-07-18 14:57   ` Eric Chanudet

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=34a4a052-b76f-b49d-6703-405d65ffd597@linaro.org \
    --to=caleb.connolly@linaro.org \
    --cc=agross@kernel.org \
    --cc=andersson@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=echanude@redhat.com \
    --cc=konrad.dybcio@linaro.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®