mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Javier Martinez Canillas <javierm@redhat.com>
To: James Ettle <james@ettle.org.uk>,
	linux-integrity@vger.kernel.org, azhar.shaikh@intel.com,
	jarkko.sakkinen@linux.intel.com
Cc: linux-kernel@vger.kernel.org, james.l.morris@oracle.com,
	Jason Gunthorpe <jgg@ziepe.ca>
Subject: Re: [BISECTED] tpm CLKRUN breaks PS/2 keyboard and touchpad on Braswell system
Date: Tue, 12 Dec 2017 12:38:00 +0100	[thread overview]
Message-ID: <34b361bf-cce7-a1ac-f8a3-76ef22f5b6b0@redhat.com> (raw)
In-Reply-To: <57d96314-cc9c-0656-186e-4eb77a132b70@ettle.org.uk>

Hello James,

On 12/11/2017 08:37 PM, James Ettle wrote:
> Hello,
> 
> [First: Apologies if cross-posting from Kernel.org BZ is bad form; my distro BZ advised I post this to your mailing list as well.]
> 
> Situation: enabling TPM on a Clevo W510LU with an Intel N3160 CPU breaks PS/2 keyboard and mouse. They just don't respond until after a suspend/resume cycle, and after that they later stop after a while.
> 
> I have confirmed this by blacklisting tpm modules. I noticed this first with kernel 4.13, and have bisected it down to:
> 
> 5e572cab92f0bb56ca1e6e5ee4d807663a7ccbad is the first bad commit
> commit 5e572cab92f0bb56ca1e6e5ee4d807663a7ccbad
> Author: Azhar Shaikh <azhar.shaikh@intel.com>
> Date:   Sun Jun 18 19:17:59 2017 -0700
> 
>     tpm: Enable CLKRUN protocol for Braswell systems
>     
>     To overcome a hardware limitation on Intel Braswell systems,
>     disable CLKRUN protocol during TPM transactions and re-enable
>     once the transaction is completed.
>     
>     Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com>
>     Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
>     Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
>     Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
>     Signed-off-by: James Morris <james.l.morris@oracle.com>
> 
> :040000 040000 5437c91886cb62c497255f2c60dbedd7268ab50d 1863a1738ded35a817aad52f9f2b451bd43623d7 M	drivers
> 
> Currently in Kernel.org bugzilla 197287.
> 
> Please let me know if you need any further info.
>

I don't have access to a Braswell machine to reproduce this. I tried to do it
on different Intel systems by modifying is_bsw() to always return true, but
that didn't work either. They work correctly even when CLKRUN_EN is toggled.

I'm not familiar with LPC so please let me know if my assumptions are wrong,
but I find suspicious that a driver for a single device attached to the bus
can control the CLKRUN# signal which AFAIU may be needed for other devices.

So that would explain why the mentioned commit causes issues for PS/2 mouse
and keyboards, since these are attached to the LPC bus and may rely on the
CLKRUN# signal for proper operation.

I see that the following [0,1] patches for the tpm_tis driver landed a few
days ago, they change how the CLKRUN protocol is enabled/disabled. Instead
of doing it per each TPM transaction, it does it once for the duration of
a TPM command.

Not sure if that will make things better or worse for you, but it would be
good to try in case it makes a difference.

[0]: http://git.infradead.org/users/jjs/linux-tpmdd.git/commit/667dcc75be864ff4c17cf58891853b7393bba3e2
[1]: http://git.infradead.org/users/jjs/linux-tpmdd.git/commit/db3248e8a036c39141c8f7e9f1cf5c5ae6815f76

> Many thanks,
> James.
> 

Best regards,
-- 
Javier Martinez Canillas
Software Engineer - Desktop Hardware Enablement
Red Hat

  reply	other threads:[~2017-12-12 11:38 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-12-11 19:37 James Ettle
2017-12-12 11:38 ` Javier Martinez Canillas [this message]
2017-12-12 18:57   ` Jason Gunthorpe
2017-12-12 19:12     ` Javier Martinez Canillas
2017-12-12 21:17   ` James Ettle
2017-12-14 19:08     ` Javier Martinez Canillas
2017-12-14 19:10       ` Jason Gunthorpe
2017-12-15 14:56         ` Jarkko Sakkinen
2017-12-15 17:38           ` Jason Gunthorpe
2017-12-16 17:01             ` Jarkko Sakkinen
2017-12-16 20:59               ` Javier Martinez Canillas
2017-12-18 11:11                 ` Javier Martinez Canillas
2018-01-02 20:53                   ` Pavel Machek
2017-12-18 12:22               ` Javier Martinez Canillas
2017-12-18 12:29                 ` Javier Martinez Canillas
2017-12-18 17:55                   ` Jason Gunthorpe
2017-12-18 19:29                     ` Javier Martinez Canillas
2017-12-18 19:34                       ` Shaikh, Azhar
2017-12-18 20:04                         ` Shaikh, Azhar
2017-12-18 20:19                         ` Jason Gunthorpe
2017-12-18 23:34                           ` Javier Martinez Canillas
2017-12-19  2:08                             ` Jason Gunthorpe
2017-12-19 13:10                             ` Jarkko Sakkinen
2017-12-19 13:12                               ` Javier Martinez Canillas
2017-12-19 13:04                           ` Jarkko Sakkinen
2017-12-19 20:20                             ` Jason Gunthorpe
2017-12-18 23:06                         ` Javier Martinez Canillas
2017-12-18 20:17                       ` Jason Gunthorpe
2017-12-19 13:02                     ` Jarkko Sakkinen
2017-12-18 18:26                   ` James Ettle
2017-12-18 19:34                     ` Javier Martinez Canillas
2017-12-19 13:00                     ` Jarkko Sakkinen
2017-12-19 13:18                       ` James Ettle
2017-12-22 18:30                         ` Jarkko Sakkinen
2017-12-19 12:59                 ` Jarkko Sakkinen
2017-12-19 13:10                   ` Javier Martinez Canillas
2017-12-19 21:08                 ` [PATCH 1/1] tpm: only attempt to disable the LPC CLKRUN if is already kbuild test robot
2017-12-14 11:21 ` [BISECTED] tpm CLKRUN breaks PS/2 keyboard and touchpad on Braswell system Jarkko Sakkinen
2017-12-14 12:05   ` Javier Martinez Canillas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=34b361bf-cce7-a1ac-f8a3-76ef22f5b6b0@redhat.com \
    --to=javierm@redhat.com \
    --cc=azhar.shaikh@intel.com \
    --cc=james.l.morris@oracle.com \
    --cc=james@ettle.org.uk \
    --cc=jarkko.sakkinen@linux.intel.com \
    --cc=jgg@ziepe.ca \
    --cc=linux-integrity@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®