From: "Martin J. Bligh" <mbligh@aracnet.com>
To: linux-kernel <linux-kernel@vger.kernel.org>
Subject: [Bug 700] New: Usb may fail just after plugging the device (usb mp3 player)
Date: Sat, 10 May 2003 10:12:54 -0700 [thread overview]
Message-ID: <3500000.1052586774@[10.10.2.4]> (raw)
http://bugme.osdl.org/show_bug.cgi?id=700
Summary: Usb may fail just after plugging the device (usb mp3
player)
Kernel Version: 2.5.69-bk4
Status: NEW
Severity: low
Owner: greg@kroah.com
Submitter: solt@dns.toxicfilms.tv
Distribution:Debian 3.0 unstable
Hardware Environment: magicstar mp3 player usb flash driver
Software Environment:
Problem Description:
Steps to reproduce:
Plugin the device, mount it, remove the device.
After some time plug it again. This will generate this calltrace:ay 10 15:07:44 pysiak kernel: drivers/usb/host/uhci-hcd.c: d000: wakeup_hc
May 10 15:07:44 pysiak kernel: hub 1-0:0: port 1, status 101, change 1, 12 Mb/s
May 10 15:07:45 pysiak kernel: hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x101
May 10 15:07:45 pysiak kernel: drivers/usb/host/uhci-hcd.c: d000: suspend_hc
May 10 15:07:45 pysiak kernel: drivers/usb/host/uhci-hcd.c: d000: wakeup_hc
May 10 15:07:45 pysiak kernel: hub 1-0:0: new USB device on port 1, assigned address 3
May 10 15:07:45 pysiak kernel: usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=3
May 10 15:07:45 pysiak kernel: usb 1-1: Product: USB MP3
May 10 15:07:45 pysiak kernel: usb 1-1: Manufacturer:
May 10 15:07:45 pysiak kernel: usb 1-1: SerialNumber: 14331C050414
May 10 15:07:45 pysiak kernel: usb 1-1: usb_new_device - registering interface 1-1:0
May 10 15:07:45 pysiak kernel: usb-storage 1-1:0: usb_device_probe
May 10 15:07:45 pysiak kernel: usb-storage 1-1:0: usb_device_probe - got id
May 10 15:07:45 pysiak kernel: scsi0 : SCSI emulation for USB Mass Storage devices
May 10 15:07:45 pysiak kernel: Vendor: Model: USB MP3 Rev: 1.04
May 10 15:07:45 pysiak kernel: Type: Direct-Access ANSI SCSI revision: 02
May 10 15:07:45 pysiak kernel: SCSI device sda: 243712 512-byte hdwr sectors (125 MB)
May 10 15:07:45 pysiak kernel: sda: Write Protect is off
May 10 15:07:45 pysiak kernel: sda: Mode Sense: 43 00 00 00
May 10 15:07:45 pysiak kernel: sda: cache data unavailable
May 10 15:07:45 pysiak kernel: sda: assuming drive cache: write through
May 10 15:07:45 pysiak kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000018
May 10 15:07:45 pysiak kernel: printing eip:
May 10 15:07:45 pysiak kernel: c02282db
May 10 15:07:45 pysiak kernel: *pde = 00000000
May 10 15:07:45 pysiak kernel: Oops: 0000 [#1]
May 10 15:07:45 pysiak kernel: CPU: 0
May 10 15:07:45 pysiak kernel: EIP: 0060:[scsi_device_get+9/52] Tainted: P
May 10 15:07:45 pysiak kernel: EFLAGS: 00010293
May 10 15:07:45 pysiak kernel: EIP is at scsi_device_get+0x9/0x34
May 10 15:07:45 pysiak kernel: eax: 00000000 ebx: c1518500 ecx: 00000001 edx: 00000000
May 10 15:07:45 pysiak kernel: esi: 00000000 edi: c151b5e0 ebp: db89b980 esp: c15bdb00
May 10 15:07:45 pysiak kernel: ds: 007b es: 007b ss: 0068
May 10 15:07:45 pysiak kernel: Process khubd (pid: 4, threadinfo=c15bc000 task=dbf8c680)
May 10 15:07:45 pysiak kernel: Stack: c0230135 00000000 00000008 c1518500 c02300f0 00000000 db89b980 c014b2e6
May 10 15:07:45 pysiak kernel: db89b980 c15bdc64 c12acd80 c0356aac c0130416 c12acd80 00000000 c1518518
May 10 15:07:45 pysiak kernel: 00000000 c1518500 00000001 c15bdc64 da231800 c014b38e c1518500 db89b980
May 10 15:07:45 pysiak kernel: Call Trace:
May 10 15:07:45 pysiak kernel: [sd_open+69/284] sd_open+0x45/0x11c
May 10 15:07:45 pysiak kernel: [sd_open+0/284] sd_open+0x0/0x11c
May 10 15:07:45 pysiak kernel: [do_open+721/764] do_open+0x2d1/0x2fc
May 10 15:07:45 pysiak kernel: [buffered_rmqueue+146/251] buffered_rmqueue+0x92/0xfb
May 10 15:07:45 pysiak kernel: [blkdev_get+125/146] blkdev_get+0x7d/0x92
May 10 15:07:45 pysiak kernel: [register_disk+193/319] register_disk+0xc1/0x13f
May 10 15:07:45 pysiak kernel: [blk_register_region+72/209] blk_register_region+0x48/0xd1
May 10 15:07:45 pysiak kernel: [add_disk+78/94] add_disk+0x4e/0x5e
May 10 15:07:45 pysiak kernel: [exact_match+0/5] exact_match+0x0/0x5
May 10 15:07:45 pysiak kernel: [exact_lock+0/30] exact_lock+0x0/0x1e
May 10 15:07:45 pysiak kernel: [sd_attach+486/716] sd_attach+0x1e6/0x2cc
May 10 15:07:45 pysiak kernel: [scsi_attach_device+118/154] scsi_attach_device+0x76/0x9a
May 10 15:07:45 pysiak kernel: [scsi_add_host+95/129] scsi_add_host+0x5f/0x81
May 10 15:07:45 pysiak kernel: [storage_probe+1331/1879] storage_probe+0x533/0x757
May 10 15:07:45 pysiak kernel: [buffered_rmqueue+146/251] buffered_rmqueue+0x92/0xfb
May 10 15:07:45 pysiak kernel: [usb_device_probe+210/249] usb_device_probe+0xd2/0xf9
May 10 15:07:45 pysiak kernel: [bus_match+69/115] bus_match+0x45/0x73
May 10 15:07:45 pysiak kernel: [device_attach+76/127] device_attach+0x4c/0x7f
May 10 15:07:45 pysiak kernel: [bus_add_device+100/174] bus_add_device+0x64/0xae
May 10 15:07:45 pysiak kernel: [device_add+208/254] device_add+0xd0/0xfe
May 10 15:07:45 pysiak kernel: [usb_new_device+1136/1501] usb_new_device+0x470/0x5dd
May 10 15:07:45 pysiak kernel: [usb_hub_port_connect_change+564/919] usb_hub_port_connect_change+0x234/0x397
May 10 15:07:45 pysiak kernel: [usb_hub_events+1037/1144] usb_hub_events+0x40d/0x478
May 10 15:07:45 pysiak kernel: [usb_hub_thread+49/242] usb_hub_thread+0x31/0xf2
May 10 15:07:45 pysiak kernel: [default_wake_function+0/18] default_wake_function+0x0/0x12
May 10 15:07:45 pysiak kernel: [usb_hub_thread+0/242] usb_hub_thread+0x0/0xf2
May 10 15:07:45 pysiak kernel: [kernel_thread_helper+5/11] kernel_thread_helper+0x5/0xb
May 10 15:07:45 pysiak kernel:
May 10 15:07:45 pysiak kernel: Code: 8b 42 18 8b 40 4c 8b 00 85 c0 74 0b 83 38 02 74 16 ff 80 00
Also, when the device is unplugged and sometimes when it is plugged while rebooting i get these about 20 lines / second
May 10 18:04:55 pysiak kernel: drivers/usb/host/uhci-hcd.c: d000: wakeup_hc
May 10 18:04:55 pysiak kernel: drivers/usb/host/uhci-hcd.c: d000: suspend_hc
May 10 18:04:55 pysiak kernel: drivers/usb/host/uhci-hcd.c: d000: wakeup_hc
May 10 18:04:55 pysiak kernel: drivers/usb/host/uhci-hcd.c: d000: suspend_hc
May 10 18:04:55 pysiak kernel: drivers/usb/host/uhci-hcd.c: d000: wakeup_hc
reply other threads:[~2003-05-10 19:14 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='3500000.1052586774@[10.10.2.4]' \
--to=mbligh@aracnet.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®