From: "Tomi Orava" <Tomi.Orava@ncircle.nullnet.fi>
To: "Bartlomiej Zolnierkiewicz" <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: "Svetoslav Slavtchev" <svetljo@gmx.de>,
"Carlos Fernandez Sanz" <cfs-lk@nisupu.com>,
linux-kernel@vger.kernel.org
Subject: Re: HighPoint 374
Date: Tue, 21 Oct 2003 21:50:32 +0300 (EEST) [thread overview]
Message-ID: <35640.192.168.9.10.1066762232.squirrel@ncircle.nullnet.fi> (raw)
In-Reply-To: <200310202325.05384.bzolnier@elka.pw.edu.pl>
Ups, hit enter while still writing the message, sorry about that.
Anyway, I just wanted to know if the following error messages
tell you anything new.
The test was done by copying almost 40GB data simultaneously
from one RAID1-mirror (disks 1&2 on hpt374) to disks 3&4 on
hpt374 as well _and_ to disks 1&2 on an external Sil680 PCI-card.
Kernel version was 2.4.23-pre7.
In my tests the hdparm -m doesn't solve anything.
The hardware was Epox 8K9A3+ with integrated hpt374-chip.
Processor is AMD 1.4TB, no overclocking of any kind.
Regards,
Tomi Orava
---------------------------------------------------------------
Oct 21 20:15:05 alderan kernel: hdk: drive_cmd: status=0x51 { DriveReady
SeekComplete Error }
Oct 21 20:15:05 alderan kernel: hdk: drive_cmd: error=0x04 {
DriveStatusError }
Oct 21 20:15:05 alderan kernel: hdk: drive_cmd: status=0x51 { DriveReady
SeekComplete Error }
Oct 21 20:15:05 alderan kernel: hdk: drive_cmd: error=0x04 {
DriveStatusError }
Oct 21 20:15:17 alderan kernel: hdk: drive_cmd: status=0x51 { DriveReady
SeekComplete Error }
Oct 21 20:15:17 alderan kernel: hdk: drive_cmd: error=0x04 {
DriveStatusError }
Oct 21 20:22:36 alderan kernel: hdg: set_drive_speed_status: status=0xff {
Busy }
Oct 21 20:30:57 alderan kernel: hdi: dma_timer_expiry: dma status == 0x20
Oct 21 20:30:57 alderan kernel: hdi: timeout waiting for DMA
Oct 21 20:30:57 alderan kernel: hdi: timeout waiting for DMA
Oct 21 20:30:57 alderan kernel: hdi: (__ide_dma_test_irq) called while not
waiting
Oct 21 20:30:57 alderan kernel: hdi: status error: status=0x58 {
DriveReady SeekComplete DataRequest }
Oct 21 20:30:57 alderan kernel:
Oct 21 20:30:57 alderan kernel: hdi: drive not ready for command
Oct 21 20:30:57 alderan kernel: hdi: status timeout: status=0xd0 { Busy }
Oct 21 20:30:57 alderan kernel:
Oct 21 20:30:57 alderan kernel: hdi: drive not ready for command
Oct 21 20:30:57 alderan kernel: ide4: reset: success
Oct 21 20:30:57 alderan kernel: blk: queue c0498a50, I/O limit 4095Mb
(mask 0xffffffff)
Oct 21 20:30:57 alderan kernel: hdi: status error: status=0x58 {
DriveReady SeekComplete DataRequest }
Oct 21 20:31:01 alderan kernel:
Oct 21 20:31:10 alderan kernel: hdi: drive not ready for command
Oct 21 20:31:17 alderan kernel: hdi: dma_timer_expiry: dma status == 0x20
Oct 21 20:31:20 alderan kernel: hdi: timeout waiting for DMA
Oct 21 20:31:20 alderan kernel: hdi: timeout waiting for DMA
Oct 21 20:31:20 alderan kernel: hdi: (__ide_dma_test_irq) called while not
waiting
Oct 21 20:31:20 alderan kernel: hdi: status error: status=0x58 {
DriveReady SeekComplete DataRequest }
Oct 21 20:31:20 alderan kernel:
Oct 21 20:31:20 alderan kernel: hdi: drive not ready for command
Oct 21 20:31:20 alderan kernel: hdi: status timeout: status=0xd0 { Busy }
Oct 21 20:31:20 alderan kernel:
Oct 21 20:31:20 alderan kernel: hdi: drive not ready for command
Oct 21 20:31:20 alderan kernel: ide4: reset: success
Oct 21 20:32:36 alderan kernel: hdi: lost interrupt
--
Tomi.Orava@ncircle.nullnet.fi
next prev parent reply other threads:[~2003-10-21 18:50 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-10-19 19:57 Svetoslav Slavtchev
2003-10-19 20:30 ` Andre Hedrick
2003-10-19 20:46 ` Svetoslav Slavtchev
2003-10-19 20:51 ` Bartlomiej Zolnierkiewicz
2003-10-19 20:54 ` Svetoslav Slavtchev
2003-10-20 6:48 ` Jens Axboe
2003-10-20 7:43 ` Tomi Orava
2003-10-20 8:10 ` Svetoslav Slavtchev
2003-10-20 8:21 ` Nick Piggin
2003-10-20 8:30 ` Svetoslav Slavtchev
2003-10-19 21:51 ` Tomi Orava
2003-10-19 22:00 ` Svetoslav Slavtchev
2003-10-19 22:11 ` Svetoslav Slavtchev
2003-10-19 22:24 ` Tomi Orava
2003-10-20 7:53 ` Svetoslav Slavtchev
2003-10-20 8:03 ` Tomi Orava
2003-10-20 9:03 ` Svetoslav Slavtchev
2003-10-20 17:02 ` Carlos Fernandez Sanz
2003-10-20 19:14 ` Svetoslav Slavtchev
2003-10-20 20:23 ` Carlos Fernandez Sanz
2003-10-20 21:07 ` Svetoslav Slavtchev
2003-10-20 21:25 ` Bartlomiej Zolnierkiewicz
2003-10-20 21:25 ` Svetoslav Slavtchev
2003-10-21 18:43 ` Tomi Orava
2003-10-21 18:50 ` Tomi Orava [this message]
-- strict thread matches above, loose matches on Subject: below --
2003-10-21 9:23 Jindrich Makovicka
2003-10-21 16:59 ` Tomi Orava
2003-10-19 19:42 Christian Guggenberger
2003-10-19 19:54 ` Tomi Orava
2003-10-18 9:44 Carlos Fernandez Sanz
2003-10-18 10:15 ` Måns Rullgård
2003-10-19 12:13 ` Tomi Orava
2003-10-19 16:48 ` Carlos Fernandez Sanz
2003-10-19 17:16 ` Tomi Orava
2003-10-19 17:39 ` Carlos Fernandez Sanz
2003-10-19 19:27 ` Tomi Orava
2003-10-19 19:35 ` Carlos Fernandez Sanz
2003-10-19 15:59 ` Joel Smith
2003-10-19 17:24 ` Tomi Orava
2003-10-19 17:42 ` Måns Rullgård
2003-10-19 19:14 ` Tomi Orava
2003-10-19 19:27 ` Carlos Fernandez Sanz
2003-10-19 19:39 ` Tomi Orava
2003-10-19 20:12 ` Carlos Fernandez Sanz
2003-10-19 19:39 ` Måns Rullgård
2003-10-19 19:54 ` David B. Stevens
2003-10-20 8:38 ` Geller Sandor
2003-10-19 21:12 ` Joel Smith
2003-10-19 17:28 ` Carlos Fernandez Sanz
2003-10-19 21:35 ` Joel Smith
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=35640.192.168.9.10.1066762232.squirrel@ncircle.nullnet.fi \
--to=tomi.orava@ncircle.nullnet.fi \
--cc=B.Zolnierkiewicz@elka.pw.edu.pl \
--cc=cfs-lk@nisupu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=svetljo@gmx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®