Re: [PATCH v2 1/2] iio: adc: qcom-spmi-adc5-gen3: Share SDAM0 IRQ with ADC_TM auxiliary driver

[Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>]

Hi Andy, Johnathan,

On 5/26/26 12:56, Jishnu Prakash wrote:
> The SDAM0 IRQ can be triggered for both EOC (end of conversion) events for
> immediate ADC reads done in this driver and for threshold violation events,
> based on ADC_TM thresholds configured from the auxiliary ADC_TM driver on
> TM channels on the first SDAM.
> 
> At present, this interrupt is handled only in the ISR in the main ADC driver.
> When the ISR is triggered for an ADC_TM event, this driver notifies the ADC_TM
> driver by calling a notifier callback exposed from it for this purpose.
> 
> To simplify the interrupt handling in both drivers, share the interrupt between
> the drivers. With this, ADC_TM interrupts on SDAM0 will be handled directly in
> the ADC_TM driver, so remove the notifier callback and all TM interrupt
> handling in the main ADC ISR.

Given the nature of these changes reworking how is handled the interrupt 
to share it properly with the TM sensor and the dependency of patch 2 on 
this one, I think it makes sense to merge these two patches through the 
thermal tree. Are you fine with that ?