From: "jiale yao" <19888972804@163.com>
To: "Jassi Brar" <jassisinghbrar@gmail.com>
Cc: "Sudeep Holla" <sudeep.holla@kernel.org>,
linux-acpi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re:Re: [PATCH] mailbox: pcc: validate PCCT subspaces before parsing
Date: Thu, 22 Oct 2026 10:42:19 +0800 (CST) [thread overview]
Message-ID: <35886acd.272d.1a1617ceb00.Coremail.19888972804@163.com> (raw)
In-Reply-To: <CABb+yY0s=eHDyW-=5++9zetFid_oVGCQkhqSWBQs+ty4Bnb-EA@mail.gmail.com>
Hi Jassi,
At 2026-10-22 10:26:27, "Jassi Brar" <jassisinghbrar@gmail.com> wrote:
>On Fri, Oct 16, 2026 at 9:15 AM Jiale Yao <yaojiale02@163.com> wrote:
>>
>> The PCC mailbox probe walks PCCT entries by their declared lengths
>> without checking that each entry is contained in the table. It also
>> passes generic headers to type-specific parsers without establishing the
>> required record size. Malformed firmware can therefore move the cursor
>> outside the PCCT or cause out-of-bounds field reads.
>>
>> Validate the table header, each subspace range, and the minimum size for
>> supported subspace types during both the counting and probe passes.
>>
>> Signed-off-by: Jiale Yao <yaojiale02@163.com>
>> ---
>> drivers/mailbox/pcc.c | 53 ++++++++++++++++++++++++++++++++++++++++++-
>> 1 file changed, 52 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/mailbox/pcc.c b/drivers/mailbox/pcc.c
>> index 9888dab64639..37b2ddb44bda 100644
>> --- a/drivers/mailbox/pcc.c
>> +++ b/drivers/mailbox/pcc.c
>> @@ -553,6 +553,42 @@ static const struct mbox_chan_ops pcc_chan_ops = {
>> .last_tx_done = pcc_last_tx_done,
>> };
>>
>> +static bool pcc_subspace_is_valid(struct acpi_subtable_header *entry,
>> + unsigned long end)
>> +{
>> + unsigned long start = (unsigned long)entry;
>> + size_t length, min_length;
>> +
>> + if (start >= end || end - start < sizeof(*entry))
>> + return false;
>
>(end - start < sizeof(*entry)) is implied by the two length checks
>below, so only "start >= end" is needed here.
>
>> + length = entry->length;
>> + if (length < sizeof(*entry) || length > end - start)
>> + return false;
>> +
>> + switch (entry->type) {
>> + case ACPI_PCCT_TYPE_GENERIC_SUBSPACE:
>> + min_length = sizeof(struct acpi_pcct_subspace);
>> + break;
>> + case ACPI_PCCT_TYPE_HW_REDUCED_SUBSPACE:
>> + min_length = sizeof(struct acpi_pcct_hw_reduced);
>> + break;
>> + case ACPI_PCCT_TYPE_HW_REDUCED_SUBSPACE_TYPE2:
>> + min_length = sizeof(struct acpi_pcct_hw_reduced_type2);
>> + break;
>> + case ACPI_PCCT_TYPE_EXT_PCC_MASTER_SUBSPACE:
>> + min_length = sizeof(struct acpi_pcct_ext_pcc_master);
>> + break;
>> + case ACPI_PCCT_TYPE_EXT_PCC_SLAVE_SUBSPACE:
>> + min_length = sizeof(struct acpi_pcct_ext_pcc_slave);
>> + break;
>> + default:
>> + return false;
>> + }
>> +
>> + return length >= min_length;
>
>How about something like
>
>static const u16 pcc_subspace_min_len[ACPI_PCCT_TYPE_RESERVED] = {
> [ACPI_PCCT_TYPE_GENERIC_SUBSPACE] =
> sizeof(struct acpi_pcct_subspace),
> [ACPI_PCCT_TYPE_HW_REDUCED_SUBSPACE] =
> sizeof(struct acpi_pcct_hw_reduced),
> [ACPI_PCCT_TYPE_HW_REDUCED_SUBSPACE_TYPE2] =
> sizeof(struct acpi_pcct_hw_reduced_type2),
> [ACPI_PCCT_TYPE_EXT_PCC_MASTER_SUBSPACE] =
> sizeof(struct acpi_pcct_ext_pcc_master),
> [ACPI_PCCT_TYPE_EXT_PCC_SLAVE_SUBSPACE] =
> sizeof(struct acpi_pcct_ext_pcc_slave),
>};
Sounds great, I will submit v2.
Thanks for your review.
>
>return entry->length >= pcc_subspace_min_len[entry->type];
>
>Cheers
>Jassi
next prev parent reply other threads:[~2026-10-22 2:42 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-16 14:15 Jiale Yao
2026-10-17 7:35 ` jiale yao
2026-10-22 2:26 ` [PATCH] " Jassi Brar
2026-10-22 2:42 ` jiale yao [this message]
2026-10-23 9:40 ` jiale yao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=35886acd.272d.1a1617ceb00.Coremail.19888972804@163.com \
--to=19888972804@163.com \
--cc=jassisinghbrar@gmail.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sudeep.holla@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®