Re: [RFC PATCH 4/5] net: macb: Add support for suspend/resume with full power down

[Claudiu Beznea <Claudiu.Beznea@microchip.com>]

On 22.03.2018 15:51, harinikatakamlinux@gmail.com wrote:
> From: Harini Katakam <harinik@xilinx.com>
> 
> When macb device is suspended and system is powered down, the clocks
> are removed and hence macb should be closed gracefully and restored
> upon resume. 

Is this a power saving mode which shut down the core?

This patch does the same by switching off the net device,
> suspending phy and performing necessary cleanup of interrupts and BDs.
> Upon resume, all these are reinitialized again.
> 
> Reset of macb device is done only when GEM is not a wake device.
> Even when gem is a wake device, tx queues can be stopped and ptp device
> can be closed (tsu clock will be disabled in pm_runtime_suspend) as
> wake event detection has no dependency on this.
> 
> Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
> Signed-off-by: Harini Katakam <harinik@xilinx.com>
> ---
>  drivers/net/ethernet/cadence/macb_main.c | 38 ++++++++++++++++++++++++++++++--
>  1 file changed, 36 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
> index ce75088..bca91bd 100644
> --- a/drivers/net/ethernet/cadence/macb_main.c
> +++ b/drivers/net/ethernet/cadence/macb_main.c
> @@ -4167,16 +4167,33 @@ static int __maybe_unused macb_suspend(struct device *dev)
>  	struct platform_device *pdev = to_platform_device(dev);
>  	struct net_device *netdev = platform_get_drvdata(pdev);
>  	struct macb *bp = netdev_priv(netdev);
> +	struct macb_queue *queue = bp->queues;
> +	unsigned long flags;
> +	unsigned int q;
> +
> +	if (!netif_running(netdev))
> +		return 0;
>  
> -	netif_carrier_off(netdev);
> -	netif_device_detach(netdev);
>  
>  	if (bp->wol & MACB_WOL_ENABLED) {
>  		macb_writel(bp, IER, MACB_BIT(WOL));
>  		macb_writel(bp, WOL, MACB_BIT(MAG));
>  		enable_irq_wake(bp->queues[0].irq);
> +		netif_device_detach(netdev);
> +	} else {
> +		netif_device_detach(netdev);
> +		for (q = 0, queue = bp->queues; q < bp->num_queues; ++q, ++queue)
> +			napi_disable(&queue->napi);
> +		phy_stop(netdev->phydev);
> +		phy_suspend(netdev->phydev);
> +		spin_lock_irqsave(&bp->lock, flags);
> +		macb_reset_hw(bp);
> +		spin_unlock_irqrestore(&bp->lock, flags);

Wouldn't be simple to just call macb_close() here?

>  	}
>  
> +	netif_carrier_off(netdev);
> +	if (bp->ptp_info)
> +		bp->ptp_info->ptp_remove(netdev);
>  	pm_runtime_force_suspend(dev);
>  
>  	return 0;
> @@ -4187,6 +4204,11 @@ static int __maybe_unused macb_resume(struct device *dev)
>  	struct platform_device *pdev = to_platform_device(dev);
>  	struct net_device *netdev = platform_get_drvdata(pdev);
>  	struct macb *bp = netdev_priv(netdev);
> +	struct macb_queue *queue = bp->queues;
> +	unsigned int q;
> +
> +	if (!netif_running(netdev))
> +		return 0;
>  
>  	pm_runtime_force_resume(dev);
>  
> @@ -4194,9 +4216,21 @@ static int __maybe_unused macb_resume(struct device *dev)
>  		macb_writel(bp, IDR, MACB_BIT(WOL));
>  		macb_writel(bp, WOL, 0);
>  		disable_irq_wake(bp->queues[0].irq);
> +	} else {
> +		macb_writel(bp, NCR, MACB_BIT(MPE));
> +		for (q = 0, queue = bp->queues; q < bp->num_queues; ++q, ++queue)
> +			napi_enable(&queue->napi);
> +		netif_carrier_on(netdev);
> +		phy_resume(netdev->phydev);
> +		phy_start(netdev->phydev);
>  	}
>  
> +	bp->macbgem_ops.mog_init_rings(bp);
> +	macb_init_hw(bp);
> +	macb_set_rx_mode(netdev);
>  	netif_device_attach(netdev);
> +	if (bp->ptp_info)
> +		bp->ptp_info->ptp_init(netdev);

Wouln't be simpler to call macb_open() here?

>  
>  	return 0;
>  }
>