Re: [PATCH v3 04/10] otm

[Yannick FERTRE <yannick.fertre@st.com>]

Hi,

Sorry, I send more than 10 patches.

I will remove this dummy patches tomorrow with next version.



On 03/13/2018 03:12 PM, Patrice CHOTARD wrote:
> Hi Yannick
>
> There is a problem with patch 4. I received two patches 04/10, this one
> and [PATCH v3 04/10] video: add support of panel OTM8009A.
>
> Patrice
>
> On 03/13/2018 02:50 PM, yannick fertre wrote:
>> ---
>>    drivers/video/orisetech_otm8009a.c | 4 +++-
>>    1 file changed, 3 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/video/orisetech_otm8009a.c b/drivers/video/orisetech_otm8009a.c
>> index 81b11d7..aa8139a 100644
>> --- a/drivers/video/orisetech_otm8009a.c
>> +++ b/drivers/video/orisetech_otm8009a.c
>> @@ -289,9 +289,11 @@ static int otm8009a_panel_probe(struct udevice *dev)
>>    	struct otm8009a_panel_priv *priv = dev_get_priv(dev);
>>    	int ret;
>>    
>> -	/* reset panel must be done before probe */
>> +	/* reset panel */
>>    	dm_gpio_set_value(&priv->reset, true);
>>    
>> +	mdelay(1);
>> +
>>    	if (IS_ENABLED(CONFIG_DM_REGULATOR) && priv->reg) {
>>    		dev_err(dev, "enable regulator '%s'\n", priv->reg->name);
>>    		ret = regulator_set_enable(priv->reg, true);