From: Heiner Kallweit <hkallweit1@gmail.com>
To: Kai-Heng Feng <kai.heng.feng@canonical.com>, nic_swsd@realtek.com
Cc: "David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
"open list:8169 10/100/1000 GIGABIT ETHERNET DRIVER"
<netdev@vger.kernel.org>,
open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2 2/2] r8169: Enable ASPM for selected NICs
Date: Thu, 12 Aug 2021 21:38:51 +0200 [thread overview]
Message-ID: <3633f984-8dd6-f81b-85f9-6083420b4516@gmail.com> (raw)
In-Reply-To: <20210812155341.817031-2-kai.heng.feng@canonical.com>
On 12.08.2021 17:53, Kai-Heng Feng wrote:
> The latest vendor driver enables ASPM for more recent r8168 NICs, do the
> same here to match the behavior.
>
> In addition, pci_disable_link_state() is only used for RTL8168D/8111D in
> vendor driver, also match that.
>
> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
> ---
> v2:
> - No change
>
> drivers/net/ethernet/realtek/r8169_main.c | 34 +++++++++++++++++------
> 1 file changed, 26 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
> index 7ab2e841dc69..caa29e72a21a 100644
> --- a/drivers/net/ethernet/realtek/r8169_main.c
> +++ b/drivers/net/ethernet/realtek/r8169_main.c
> @@ -623,7 +623,7 @@ struct rtl8169_private {
> } wk;
>
> unsigned supports_gmii:1;
> - unsigned aspm_manageable:1;
> + unsigned aspm_supported:1;
> unsigned aspm_enabled:1;
> struct delayed_work aspm_toggle;
> struct mutex aspm_mutex;
> @@ -2667,8 +2667,11 @@ static void rtl_pcie_state_l2l3_disable(struct rtl8169_private *tp)
>
> static void rtl_hw_aspm_clkreq_enable(struct rtl8169_private *tp, bool enable)
> {
> + if (!tp->aspm_supported)
> + return;
> +
> /* Don't enable ASPM in the chip if OS can't control ASPM */
> - if (enable && tp->aspm_manageable) {
> + if (enable) {
> RTL_W8(tp, Config5, RTL_R8(tp, Config5) | ASPM_en);
> RTL_W8(tp, Config2, RTL_R8(tp, Config2) | ClkReqEn);
> } else {
> @@ -5284,6 +5287,21 @@ static void rtl_init_mac_address(struct rtl8169_private *tp)
> rtl_rar_set(tp, mac_addr);
> }
>
> +static int rtl_hw_aspm_supported(struct rtl8169_private *tp)
> +{
> + switch (tp->mac_version) {
> + case RTL_GIGA_MAC_VER_32 ... RTL_GIGA_MAC_VER_36:
> + case RTL_GIGA_MAC_VER_38:
> + case RTL_GIGA_MAC_VER_40 ... RTL_GIGA_MAC_VER_42:
> + case RTL_GIGA_MAC_VER_44 ... RTL_GIGA_MAC_VER_46:
> + case RTL_GIGA_MAC_VER_49 ... RTL_GIGA_MAC_VER_63:
This shouldn't be needed because ASPM support is announced the
standard PCI way. Max a blacklist should be needed if there are
chip versions that announce ASPM support whilst in reality they
do not support it (or support is completely broken).
> + return 1;
> +
> + default:
> + return 0;
> + }
> +}
> +
> static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
> {
> struct rtl8169_private *tp;
> @@ -5315,12 +5333,12 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
> if (rc)
> return rc;
>
> - /* Disable ASPM completely as that cause random device stop working
> - * problems as well as full system hangs for some PCIe devices users.
> - */
> - rc = pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S |
> - PCIE_LINK_STATE_L1);
> - tp->aspm_manageable = !rc;
> + if (tp->mac_version == RTL_GIGA_MAC_VER_25)
> + pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S |
> + PCIE_LINK_STATE_L1 |
> + PCIE_LINK_STATE_CLKPM);
> +
> + tp->aspm_supported = rtl_hw_aspm_supported(tp);
>
> /* enable device (incl. PCI PM wakeup and hotplug setup) */
> rc = pcim_enable_device(pdev);
>
next prev parent reply other threads:[~2021-08-12 19:39 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-12 15:53 [PATCH v2 1/2] r8169: Implement dynamic ASPM mechanism Kai-Heng Feng
2021-08-12 15:53 ` [PATCH v2 2/2] r8169: Enable ASPM for selected NICs Kai-Heng Feng
2021-08-12 19:38 ` Heiner Kallweit [this message]
2021-08-13 10:11 ` Kai-Heng Feng
2021-08-14 11:23 ` Heiner Kallweit
2021-08-12 19:34 ` [PATCH v2 1/2] r8169: Implement dynamic ASPM mechanism Heiner Kallweit
2021-08-13 9:46 ` Kai-Heng Feng
2021-08-14 11:33 ` Heiner Kallweit
2021-08-13 6:46 ` [r8169] 5b4904cded: BUG:sleeping_function_called_from_invalid_context_at_kernel/locking/mutex.c kernel test robot
2021-08-13 6:48 ` [PATCH v2 1/2] r8169: Implement dynamic ASPM mechanism Heiner Kallweit
2021-08-13 9:54 ` Kai-Heng Feng
2021-08-14 11:31 ` Heiner Kallweit
2021-08-19 3:11 ` Kai-Heng Feng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3633f984-8dd6-f81b-85f9-6083420b4516@gmail.com \
--to=hkallweit1@gmail.com \
--cc=davem@davemloft.net \
--cc=kai.heng.feng@canonical.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=nic_swsd@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®