mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Baolu Lu <baolu.lu@linux.intel.com>
To: ZhaoJinming <zhaojinming@uniontech.com>,
	David Woodhouse <dwmw2@infradead.org>,
	Joerg Roedel <joro@8bytes.org>, Will Deacon <will@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>,
	iommu@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] iommu/vt-d: Fix copied_tables bitmap leak on error in copy_translation_tables
Date: Mon, 27 Jul 2026 09:51:48 +0800	[thread overview]
Message-ID: <367f963a-d337-4d49-9d5b-a558fcba813a@linux.intel.com> (raw)
In-Reply-To: <20260721132635.1436908-1-zhaojinming@uniontech.com>

On 7/21/26 21:26, ZhaoJinming wrote:
> The iommu->copied_tables bitmap was introduced by the IOMMU live
> update series to track which context entries have been copied from
> the previous kernel.  The allocation via bitmap_zalloc() was added
> inside copy_translation_tables(), but the error paths were not
> updated to free it:
> 
>    1. When old_rt_phys is 0 (invalid root table address)
>    2. When memremap(old_rt_phys) fails
>    3. When kcalloc for ctxt_tbls fails (goto out_unmap, which only
>       unmaps old_rt without releasing the bitmap)
> 
> The bitmap is only cleaned up by free_dmar_iommu(), which is
> called from the free_iommu error label in init_dmars().  However,
> when copy_translation_tables() fails, init_dmars() does not jump
> to free_iommu -- it logs the error, falls through, and continues
> with the next IOMMU.  As a result, copied_tables is leaked.
> 
> Fix this by converting the two early returns to goto a new
> err_free_bitmap label, and by making out_unmap fall through to
> it so that the bitmap is always freed on any error path.  The
> success path is changed to return 0 directly instead of falling
> through to out_unmap, since copied_tables must remain allocated
> for subsequent use.
> 
> Signed-off-by: ZhaoJinming <zhaojinming@uniontech.com>
> ---
>   drivers/iommu/intel/iommu.c | 18 ++++++++++++------
>   1 file changed, 12 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
> index 849d06dfe1ae..25f49d29da8a 100644
> --- a/drivers/iommu/intel/iommu.c
> +++ b/drivers/iommu/intel/iommu.c
> @@ -1554,12 +1554,16 @@ static int copy_translation_tables(struct intel_iommu *iommu)
>   		return -ENOMEM;
>   
>   	old_rt_phys = rtaddr_reg & VTD_PAGE_MASK;
> -	if (!old_rt_phys)
> -		return -EINVAL;
> +	if (!old_rt_phys) {
> +		ret = -EINVAL;
> +		goto err_free_bitmap;
> +	}
>   
>   	old_rt = memremap(old_rt_phys, PAGE_SIZE, MEMREMAP_WB);
> -	if (!old_rt)
> -		return -ENOMEM;
> +	if (!old_rt) {
> +		ret = -ENOMEM;
> +		goto err_free_bitmap;
> +	}
>   
>   	/* This is too big for the stack - allocate it from slab */
>   	ctxt_table_entries = ext ? 512 : 256;
> @@ -1603,11 +1607,13 @@ static int copy_translation_tables(struct intel_iommu *iommu)
>   
>   	__iommu_flush_cache(iommu, iommu->root_entry, PAGE_SIZE);
>   
> -	ret = 0;
> +	return 0;

Returning directly here bypasses memunmap().

Sashiko reported this as well:

"
Does this code leak the old_rt memory mapping on the success path?
old_rt is mapped earlier in this function:
copy_translation_tables() {
     ...
     old_rt = memremap(old_rt_phys, PAGE_SIZE, MEMREMAP_WB);
     ...
}

By returning directly here instead of setting ret = 0 and falling
through, it looks like we bypass the memunmap(old_rt) call under the
out_unmap label, leaving the mapping active.
"

https://sashiko.dev/#/patchset/20260721132635.1436908-1-zhaojinming%40uniontech.com

Do you mind fixing this with a v2?

>   
>   out_unmap:
>   	memunmap(old_rt);
> -
> +err_free_bitmap:
> +	bitmap_free(iommu->copied_tables);
> +	iommu->copied_tables = NULL;
>   	return ret;
>   }
>   

Thanks,
baolu

  reply	other threads:[~2026-07-27  1:53 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-21 13:26 ZhaoJinming
2026-07-27  1:51 ` Baolu Lu [this message]
2026-07-27  5:22   ` [PATCH v2] " ZhaoJinming
2026-07-29  5:37     ` Baolu Lu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=367f963a-d337-4d49-9d5b-a558fcba813a@linux.intel.com \
    --to=baolu.lu@linux.intel.com \
    --cc=dwmw2@infradead.org \
    --cc=iommu@lists.linux.dev \
    --cc=joro@8bytes.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robin.murphy@arm.com \
    --cc=will@kernel.org \
    --cc=zhaojinming@uniontech.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome