Re: [PATCH 1/7] dt-bindings: soc: new driver for DaVinci genpd

[David Lechner <david@lechnology.com>]

On 02/07/2018 07:45 AM, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> 
> Add a simple document for the DaVinci genpd driver. We use clock pm
> exclusively hence no reg property.
> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---
>   .../devicetree/bindings/soc/ti,davinci-pm-domains.txt       | 13 +++++++++++++
>   1 file changed, 13 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/soc/ti,davinci-pm-domains.txt
> 
> diff --git a/Documentation/devicetree/bindings/soc/ti,davinci-pm-domains.txt b/Documentation/devicetree/bindings/soc/ti,davinci-pm-domains.txt
> new file mode 100644
> index 000000000000..935d063c7b35
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/ti,davinci-pm-domains.txt
> @@ -0,0 +1,13 @@
> +Device tree bindings for the genpd driver for Texas Instruments DaVinci SoCs
> +
> +Required properties:
> +
> +- compatible:           must be "ti,davinci-pm-domains"
> +- #power-domain-cells:  must be 0
> +
> +Example:
> +
> +pwc1: power-controller@227000 {
> +	compatible = "ti,davinci-pm-domains";
> +	#power-domain-cells = <0>;
> +};
> 


We already have the PSC @227000. Why not just add
#power-domain-cells = <0>; to that node instead of creating
a new "device" when this is really the same device?